Radon in the spa of Bizovac

The radon concentration in the air and water of the Bizovac spa was measured by the Radhome silicon detector and the average values were obtained as 70 Bq/m³ in the indoor pool, 40 Bq/m³ in the hotel room, 135 Bq/m³ in the closed therapeutic bathroom, but the geothermal water had a Rn concentration of 25.3 kBq/m³ and the potable one 2.7 kBq/m³. The Rn transfer factor (f) from water to air in the indoor pool and therapeutic bathroom was 10 and 40 times higher than for normal dwellings (f _n=10^–4), respectively. The effective equivalent dose of inhaled radon for permanent personnel under the worst conditions in the spa was 5.4 mSv/y, but visitors spending two weeks in the spa could receive the dose of 77 Sv.     

Antiferromagnetism of poly(3-dodecylthiophene) irradiated by γ-beams

The magnetic properties of poly(3-dodecyl-thiophene) (PDDT) irradiated by -beams have been studied by measuring the magnetic susceptibility and EPR spectra. The irradiated PDDT is characterized, similarly as the non-irradiated one, by an antiferromagnetic course of magnetic susceptibility with a Néel temperature of 237 K. It is suggested that the antiferromagnetic properties of PDDT are caused by transformation of polarons to bipolarons, which takes place at lower temperatures.     

Measurement of the electron distribution function in flowing afterglow plasma by means of Langmuir probe

Conclusion In the present report an attempt has been made to use the second derivative method for measurements of the electron distribution function in flowing afterglow plasma. It has been shown that using the cross-correlation technique, this method seems to be a useful tool for flowing afterglow plasma investigation.     

Geometry changes of a Cu(I) phenanthroline complex on photoexcitation in a confining medium by time-resolved X-ray diffraction

Using a stroboscopic technique, in which the molecule is repeatedly excited and the structural change is probed more than 5000 times per second immediately after excitation, we performed a 16 K time-resolved single-crystal study of the microsecond lifetime triplet state of the Cu(I)phenanthroline derivative[Cu(I)(dmp)(dppe)][PF6] (dppe = 1,2-bis(diphenylphosphino)ethane). The geometry changes on excitation differ for the two symmetry-independent molecules, but are in the same direction as calculated for an isolated reference molecule, although the flattening distortion in the crystal is significantly smaller, implying that the reorganization energy is greatly affected by the confining medium.     

Mathematical modeling of the relation between myosin phosphorylation and stress development in smooth muscles

In this paper the 4-state latch bridge model proposed by Rembold and Murphy is expanded; first by incorporation of the analytical expression of Ca2+ dependent MLCK activation from the work of Kato et al. and second, by inclusion of the myosin dephosphorylation based on the Michaelis-Menten kinetics. The analysis of the proposed model and the comparison with the original model results as well as with the experimental data is presented. The model is able to predict the steady-state isometric stress and the myosin phosphorylation in dependence on steady cytosolic [Ca2+] as well as the temporal evolution of the system in dependence on the input Ca2+ signal in the form of biphasic transient, whereby our model results are in several aspects in better agreement with experimental observations.     

Amperometry with two polarizable electrodes. XVI

Summary Conditions for the magnesium determination in alkaline solution by EDTA titration with biamperometric indication were examined. The most preferable pH range was found to be above 9.6. A reliable determination can be carried out in the presence of Ca, Ni, Cu and Co up to the ratio of 11. In the case of higher concentrations of Cu and Ni masking with potassium cyanide can be used. In this case, however, a change of the titration curves occurs.A new method for the determination of water-hardness by biamperometric indication is proposed. It is rapid and accurate and meets the requirements of routine and research work (error: ±1%).

---

Zusammenfassung Die Bedingungen für die Magnesiumbestimmung in alkalischer Lösung durch Titration mit ÄDTA bei biamperometrischer Endpunktsanzeige wurden untersucht. Der günstigste pH-Bereich liegt über 9,6. Zuverlässige Bestimmungen können in Gegenwart von Ca, Ni, Cu und Co bis zum Verhältnis 11 ausgeführt werden. Höhere Konzentrationen an Cu oder Ni können mit KCN maskiert werden, wobei allerdings eine Umkehrung der Kurven auftritt.Ein Verfahren zur Wasserhärtebestimmung mit biamperometrischer Indikation wird vorgeschlagen, das schnell durchzuführen ist und genaue Werte liefert (Fehler ±1%).

---

---

Part XV: Vorlíek, J., and P. Peták: Microchem. J. 12, 466–471 (1967).     

Structural analysis of 2,6-[bis(alkyloxy)methyl]-phenyltin derivatives using electrospray ionization mass spectrometry

Electrospray ionization (ESI) mass spectrometry was applied to the structural analysis of 23 2,6-[bis(alkyloxy)methyl]phenyltin(IV) derivatives. The mass spectra were measured in both polarity modes and multistage tandem mass spectrometric (MS(n)) measurements were performed on the ion trap analyser for positively charged tin-containing ions. The sum of complementary ions observed in the positive-ion mode (i.e. [M-R(3)](+) ion) and in the negative-ion mode (i.e. [R(3)](-) ion) permits molecular mass determination in spite of the fact that the molecular adducts were often missing even in the first-order mass spectra. The subsequent fragmentation of [M-R(3)](+) ions studied by MS(n) and the correlation of observed fragment ions with the expected structures of synthesized organotin(IV) compounds allowed us to understand the fragmentation behaviour and the mechanism of the ion formation for studied compounds. The typical neutral losses are alkenes, alcohols and aldehydes. The fragmentation pattern of one selected compound was supported by MS(n) measurements of an isotopically labelled analogue to confirm unusual ion-molecule reactions of some fragment ions with water in the ion trap.     

Improved flask-combustion method for phosphorus in petroleum products

Summary An electrical assembly for the oxygen-flask combustion of lubricants and similar petroleum products is described. The pyrolysis is performed in two consecutive steps. After the ignition and burning of the sample (sorbed on sodium carbonate) the combustion is completed by further heating. The sample weight should not exceed 140 mg. In this way the sensitivity of phosphorus determination of the tentative IP standard procedure is enhanced from 0.01 to 0.001% phosphorus if the volume of solution for the final spectrophotometric measurement is reduced.

---

Zusammenfassung Ein elektrisches Gerät für die Verbrennung von Schmierölen und ähnlichen Erdölprodukten im Schöniger-Kolben wurde beschrieben. Die Pyrolyse erfolgt in zwei aufeinander folgenden Schritten. Nach der Entflammung der an Natriumcarbonat adsorbierten Probe und nach Erlöschen der Flamme erfolgt die vollständige Verbrennung von Einwaagen, die 140 mg nicht überschreiten. So konnte die Empfindlichkeit der Phosphorbestimmung nach der tentativen IP-Standardmethode von 0,01% auf 0,001% Phosphor gesteigert werden, wenn man die spektrophotometrische Messung mit vermindertem Lösungsvolumen durchführt.

---

---

Herrn Professor Dr. H. Lieb zum 90. Geburtstag gewidmet.     

A facile one‐pot synthesis of novel substituted 1,2,3,4‐tetrahydropyrimidine,part 2: Synthesis of 1‐(aralkyl/aryl)‐3‐(alkyl/aralkyl/aryl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines

1‐(Aralkyl/aryl)‐3‐(alkyyaralkyl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines ( 2a‐c ) have been synthesized by dethiomethylation of 5‐aroyl‐6‐methylthio‐1,2,3,4‐tetrahydropyrimidines ( 1a‐c ). An alternative one‐pot synthetic strategy has been developed for the title compounds 2a‐t by the reaction of enaminones 3 with pri mary amine and formaldehyde in refluxing methanol in good yields.