Cetyltrimethylammonium-coated magnetic nanoparticles for the extraction of bromate,followed by its spectrophotometric determination

We report on a combination of magnetic solid-phase extraction and spectrophotometric determination of bromate. Cetyltrimethylammonium ion was adsorbed on the surface of phenyl-functionalized silica-coated Fe₃O₄ nanoparticles (Ph-SiO₂@Fe₃O₄), and these materials served as the sorbent. The effects of surfactant and amount of sorbent, the composition of the desorption solution, the extraction time and temperature were optimized. Under optimized conditions, an enrichment factor of 12 was achieved, and the relative standard deviation is 2.9 % (for n?=?5). The calibration plot covers the 1–50 ng mL^?1 range with reasonable linearity (r ²?>?0.998); and the limit of detection is 0.5 ng mL^?1. The method is not interfered by ionic compounds commonly found in environmental water samples. It was successfully applied to the determination of bromate in spiked water samples.

Prediction of Surfactant Retention in Porous Media: A Robust Modeling Approach

Demands for hydrocarbon production have been increasing in recent decades. As a tertiary production processes, chemical flooding is one of the effective technologies to increase oil recovery of hydrocarbon reservoirs. Retention of surfactants is one of the key parameters affecting the performance and economy of a chemical flooding process. The main parameters contribute to surfactant retention are mineralogy of rock, surfactant structure, pH, salinity, acidity of the oil, microemulsion viscosity, co-solvent concentration, and mobility. Despite various theoretical studies carried out so far, a comprehensive and reliable predictive model for surfactant retention is still found lacking. In this communication, a mathematical method based on machine learning approach, namely, least square support vector machine modeling is evolved for this purpose. To this end, the model was developed and tested using experimental dynamic surfactant retention data over a wide range of conditions. The results show that the developed model provides predictions in good agreement with experimental retention data. Moreover, it is shown that the developed model is capable of simulating the actual physical trend of surfactant retention versus three most important input parameters: total acid number of oil, pH, and mobility ratio. Finally, for detection of the probable doubtful retention data, outlier diagnosis was performed on the whole data set.     

Heteroatom‐Free Arene‐Cobalt and Arene‐Iron Catalysts for Hydrogenations

75 years after the discovery of hydroformylation, cobalt catalysts are now undergoing a renaissance in hydrogenation reactions. We have evaluated arene metalates in which the low‐valent metal species is—conceptually different from heteroatom‐based ligands—stabilized by π coordination to hydrocarbons. Potassium bis(anthracene)cobaltate 1 and ‐ferrate 2 can be viewed as synthetic precursors of quasi‐“naked” anionic metal species; their aggregation is effectively impeded by (labile) coordination to the various π acceptors present in the hydrogenation reactions of unsaturated molecules (alkenes, arenes, carbonyl compounds). Kinetic studies, NMR spectroscopy, and poisoning studies of alkene hydrogenations support the formation of a homogeneous catalyst derived from 1 which is stabilized by the coordination of alkenes. This catalyst concept complements the use of complexes with heteroatom donor ligands for reductive processes.     

Synthesis of some novel tetraimidazolium salts derived from diphenyl- and dimethylglycolurils

Several new tetrabromo compounds based on diphenyl- and dimethylglycolurils were synthesized. Sequential treatment of these compounds with imidazole, methyl iodide, and sodium tetrafluoroborate gave their corresponding tetra imidazolium salts. Some of these compounds because of their low melting points can be registered as a potential and new class of ionic liquids. Correspondence: Mehdi Bakavoli, Department of Chemistry, School of Sciences, Ferdowsi University, Mashhad 91375-1436, Iran.     

An electrochemical sensor based on octahedral composite modified glassy carbon electrode for voltammetric detection of cocaine

The current work aimed to fabricate a new cocaine sensor of octahedral palladium-doped cobaltite composite (Oh-Pd²⁺ : Co₃O₄-C) using a simple hydrothermal protocol. As-fabricated cocaine sensing approach was validated by various methods. Energy dispersive X-ray analysis, X-ray diffraction and scanning electron microscopy were recruited to characterize our charged modified composite. The electrode could sensitively detect cocaine, with a lengthy linear range (0.01 μM–900.0 μM) and a limit of detection (1.3 nM). The quantitative cocaine determination was achieved in the biological specimens using our modified electrode, the results of which displayed admirable outcomes.     

A Comparative Study of the Direct Calorimetric Determination of the Denaturation Enthalpy for Lysozyme in Sodium Dodecyl Sulfate and Dodecyltrimethylammonium Bromide Solutions

The complexes of lysozyme with the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB) have been investigated by isothermal titration calorimetry at pH=7.0 and 27 °C in a phosphate buffer. A new direct calorimetric method was applied to follow the protein denaturation and study the effect of surfactants on the stability of proteins. The extended solvation model was used to represent the enthalpies of lysozyme + SDS interaction over the whole range of SDS concentrations. The solvation parameters recovered from the new equation are attributed to the structural change of lysozyme and its biological activity. At low SDS concentrations, the binding is mainly electrostatic with some simultaneous interaction of the hydrophobic tail with nearby hydrophobic regions of lysozyme. These initial interactions presumably cause some protein unfolding and expose additional hydrophobic sites. The induced enthalpy of denaturation of lysozyme by SDS is 160.81±0.02 kJ⋅mol⁻¹. The lysozyme-DTAB complexes behave very differently from those of the lysozyme-SDS complexes. SDS induces a stronger unfolding of lysozyme than DTAB. The induced enthalpy of lysozyme denaturation by DTAB is 86.46±0.02 kJ⋅mol⁻¹.     

Preparation and thermal treatment of Pd/Ag composite membrane on a porous alumina tube by sequential electroless plating technique for H2 separation

Pd/Ag/α-Al2O3 composite membranes were prepared by sequential electroless plating technique. The prepared membranes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy, and inductively coupled plasma atomic emission spectroscopy techniques （ICP-AES）. Effects of annealing time, Ag content, and air treatment on the hydrogen permeation flux and morphology of the alloys were investigated. The results of the investigation showed that the prepared type of tube had a good potential as substrate for membrane preparation. In addition, a uniform defect-free alloy was prepared by annealing at 550 ℃ in H2 atmosphere. The permeation results showed an increase in H2 permeation flux by increasing the Ag content and the annealing time. In addition, the air treatment of the prepared membranes at 400 ℃ for 1 h changed the morphology of the alloy and substantially enhanced the hydrogen flux.     

Nonpolar nitrous oxide dimer: observation of combination bands of (14N2O)2 and (15N2O)2 involving the torsion and antigeared bending modes

Spectra of the nonpolar nitrous oxide dimer in the region of the N(2)O ν(1) fundamental band were observed in a supersonic slit-jet apparatus. The expansion gas was probed using radiation from a quantum cascade or a tunable diode laser, with both lasers employed in a rapid-scan signal averaging mode. Four bands were observed and analyzed: new combination bands involving the intermolecular conrotation of the monomers (A(g) antigeared bend) for ((14)N(2)O)(2) and ((15)N(2)O)(2), the previously reported torsional combination band for ((14)N(2)O)(2) with improved signal-to-noise ratio, and the same torsional combination band for ((15)N(2)O)(2). The resulting frequencies for the intermolecular antigeared mode are 96.0926(1) and 95.4912(1) cm(-1) for ((14)N(2)O)(2) and ((15)N(2)O)(2), respectively. This is the third of the four intermolecular frequencies which has now been measured experimentally, the others being the out-of-plane torsion and the geared bend modes. Our experimental results are in good agreement with two recent high level ab initio theoretical calculations.     

Infrared spectra of ethylene clusters: (C2D4)2 and (C2D4)3

Spectra of ethylene dimers and trimers are studied in the ν(11) fundamental band region of C(2)D(4) (≈2200 cm(-1)) using a tuneable quantum cascade laser to probe a pulsed supersonic slit jet expansion. The dimer spectrum is that of a prolate symmetric top perpendicular band, with a distinctive appearance because the A rotational constant is almost exactly equal to six times the B constant. The analysis supports the previously determined cross-shaped dimer structure with D(2d) symmetry. An ethylene trimer has not previously been observed with rotational resolution. The spectrum is that of an oblate symmetric top parallel band. It leads to a proposed trimer structure which is barrel shaped and has C(3h) or C(3) symmetry, with the ethylene monomer C-C axes approximately aligned along the trimer symmetry axis.     

Reduced Graphene Oxide|Carbon Ceramic Electrode Modified with CdS‐Hemoglobin as a Sensitive Hydrogen Peroxide Biosensor

A sensitive hydrogen peroxide (H₂O₂) biosensor was developed based on a reduced graphene oxide|carbon ceramic electrode (RGO|CCE) modified with cadmium sulfide‐hemoglobin (CdS‐Hb). The electron transfer kinetics of Hb were promoted due to the synergetic function of RGO and CdS nanoparticles. The transfer coefficient (α) and the heterogeneous electron transfer rate constant (k_s) were calculated to be 0.54 and 2.6 s^?1, respectively, indicating a great facilitation achieved in the electron transfer between Hb and the electrode surface. The biosensor showed a good linear response to the reduction of H₂O₂ over the concentration range of 2–240 µM with a detection limit of 0.24 µM (S/N=3) and a sensitivity of 1.056 µA µM^?1 cm^?2. The high surface coverage of the CdS‐Hb modified RGO|CCE (1.04×10^?8 mol cm^?2) and a smaller value of the apparent Michaelis? Menten constant (0.24 mM) confirmed excellent loading of Hb and high affinity of the biosensor for hydrogen peroxide.