Synthesis of Ozone at Atmospheric Pressure by a Quenched Induction-Coupled Plasma Torch

The technical feasibility of using an induction-coupled plasma (ICP) torch to synthesize ozone at atmospheric pressure is explored. Ozone concentrations up to ~250 ppm were achieved using a thermal plasma reactor system based on an ICP torch operating at 2.5 MHz and ~11 kVA with an argon/oxygen mixture as the plasma-forming gas. The corresponding production rate and yield were ~20 g ozone/hr and ~2g ozone/kWh, respectively. A gaseous oxygen quench formed ozone by rapid mixing of molecular oxygen with atomic oxygen produced by the torch. The ozone concentration in the reaction chamber was measured by Fourier Transform infrared (FTIR) spectroscopy over a wide range of experimental conditions and configurations. The geometry of the quench gas flow, the quench flow velocity, and the quench flow rate played important roles in determining the ozone concentration. The ozone concentration was sensitive to the torch RF power, but was insensitive to the torch gas flow rates. These observations are interpreted within the framework of a simple model of ozone synthesis.     

Multiple ionization of argon in coincidence with projectile ions in 60–120 MeV Si q+-Ar collisions

A projectile ion-recoil ion coincidence technique has been employed to study the multiple ionization and the charge transfer processes in collisions of 60–120 MeV Si ^q+ (q = 4−14) ions with neutral argon atoms. The relative contribution of different ionization channels, namely; direct ionization, electron capture and electron loss leading to the production of slow moving multiply charged argon recoil ions have been investigated. The data reported on the present collision system result from a direct measurement in the considered impact energy for the first time. The total ionization cross-sections for the recoil ions are shown to scale as q ^1.7/E _p ^0.5 , where E _p is the energy in MeV of the projectile and q its charge state. The recoil fractions for the cases of total- and direct ionizations are found to decrease with increasing recoil charge state j. The total ionization fractions of the recoils are seen to depend on q and to show the presence of a ‘shell-effect’ of the target. Further, the fractions are found to vary as 1/j ² upto j = 8+. The average recoil charge state 〈j〉 increases slowly with q and with the number of lost or captured electrons from or into the projectile respectively. The projectile charge changing cross-sections σ _qq′ are found to decrease with increasing q for loss ionization and to increase with q for direct-and capture ionization processes respectively. The physics behind various scaling rules that are found to follow our data for different ionization processes is reviewed and discussed.     

Petasis three-component coupling reactions of hydrazides for the synthesis of oxadiazolones and oxazolidinones

An application of readily available hydrazides in the Petasis 3-component coupling reaction is presented. An investigation of the substrate scope was performed to establish a general, synthetically useful protocol for the formation of hydrazido alcohols, which were selectively converted to oxazolidinone and oxadiazolone ring systems through triphosgene-mediated cyclization reactions.     

All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp

We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination of the imprinted hybrid sol-gel material produces purely inorganic silica, which has very low autofluorescence and can be fusion bonded to a glass lid. Compared to top-down processing of fused silica or silicon substrates, imprint of sol-gel silica enables fabrication of high-quality nanofluidic devices without expensive high-vacuum lithography and etching techniques. The applicability of the fabricated device for single-molecule studies is demonstrated by measuring the extension of DNA molecules of different lengths confined in the nanochannels.     

Microdroplet-etched highly birefringent low-loss fiber tapers

We use hydrofluoric acid microdroplets to directly etch highly birefringent biconical fiber tapers from standard single-mode fibers. The fiber tapers have micrometer-sized cross sections, which are controlled by the etching condition. The characteristic teardrop cross section leads to a high group birefringence of B(G)≈0.017 and insertion losses <0.7 dB over waist lengths of about 2.1 mm.     

Overcoming the boundary effects in surface spline interpolation

Surface spline interpolation when the domain is all of R^d isknown to converge much faster to the data function f than inthe case when the domain is the unit ball. This difference isunderstood to be due to boundary effects which, as will be shown,also affect the size of the surface spline's coefficients. Wepropose a modified form of surface spline interpolation which,to a great extent, overcomes these boundary effects. This modifiedsurface spline interpolant uses only the values of f at thegiven interpolation points.     

Acetate formation during the ethanol oxidation on Rh(1 1 1)

The catalytic cracking of ethanol on clean and oxygen precovered Rh(1 1 1) surfaces has been studied by a combination of synchrotron based high-resolution core level spectroscopy and surface infrared spectroscopy. On the clean surface the decomposition of ethanol occurs without any formation of atomic oxygen. The presence of oxygen on the surface changes the reactivity significantly and acetate (CH₃COO) was identified as an important surface intermediate in the ethanol oxidation.     

Theoretical investigation of the coexistence of α and β-nitric acid trihydrates (NAT) molecular conformations

In this letter we document the possibility of the existence of a second molecular configuration for nitric acid trihydrates. Density functional theory (DFT) methods have been used for studying the nitric acid trihydrates α and β-NAT conformations, their spectroscopic and thermodynamics properties and dipole moments have been calculated. This study describes the gas–solid phase transition of the NAT and provides two possible pathways for the molecular structure transformation between α and β-NAT.     

Post-necking behaviour modelled by a gradient dependent plasticity theory

The delay of the onset of localization and the post-necking behaviour for stretched thin sheets are determined by three-dimensional effects. Thus, a 2-D finite element analysis based on a local plasticity theory will give a physically unrealistic mesh dependent solution. This, in spite of the fact that the stress state, is essentially two-dimensional. By incorporating a length scale with relation to the thickness of the sheet, it is demonstrated how a 2-D finite element analysis based on a gradient dependent plasticity theory can give a good approximation of the post-necking behaviour. This is illustrated by numerical comparison of results from a full 3-D finite element analysis, with results from a 2-D finite element model based on a finite strain version of a gradient dependent J₂-flow theory. Some numerical problems in the modeling will be discussed briefly.