Determination of 4-alkylphenols by novel derivatization and gas chromatography-mass spectrometry

A simple and sensitive method for the determination of alkylphenols in water samples has been developed using gas chromatography-mass spectrometry. Alkylphenols were determined after the extractive derivatization with pentafluoropyridine. The derivatization of alkylphenols efficiently proceeded to give the corresponding 4-tetrafluoropyridyl derivatives under the biphasic reaction system. The derivatization conditions including the phase-transfer catalyst, the amount of pentafluoropyridine, the reaction time, the concentration of NaOH and organic solvent were optimized. On the mass spectra of these derivatives, intense specific ion peaks were observed: m/z 256 for 4-n-alkylphenols and m/z 284 for 4-tert.-alkylphenols. Calibration curves were linear in the range of 20-1000 ng/l (200-10,000 ng/l for nonylphenol), and the detection limits varied between 6.93 and 15.7 ng/l (85.2 ng/l for nonylphenol). The average recoveries of the alkylphenols in a fortified river water sample (100 ng/l except for nonylphenol: 1000 ng/l) ranged from 91.1 to 112%. The relative standard deviations were found to be between 5.6 and 16%. This method was successfully applied to the determination of alkylphenols in river water.     

Rates of polymer formation and monomer consumption in the solution polymerization of trioxane catalyzed by BF3 · O(C2H5)2

In the solution polymerization of trioxane catalyzed by BF₃ · O(C₂H₅)₂ at 30°C. the amount of the methanol-insoluble polyoxymethylene is less than the amount of monomer consumed. This difference was much larger than the amount of formaldehyde determined in the polymerized system and could not also be explained in terms of the amount of the methanol-soluble oligomer. Tetraoxane was detected in large quantities by gas chromatography in the polymerized solution of trioxane. Therefore, the difference between the amounts of the methanol-insoluble polymer and the monomer consumed was ascribed partly to the formation of tetraoxane. In spite of the fact that tetraoxane was polymerized more easily than trioxane by BF₃ · O(C₂H₅)₂, an almost constant amount of tetraoxane was produced, independent of the kind of solvent and the polymer yield. This suggests the existence of an equilibrium concentration of tetraoxane. On the other hand, the formation of trioxane was observed in the solution polymerization of tetraoxane by BF₃ · O(C₂H₅)₂. This suggests that the formation of tetraoxane during the trioxane polymerization is due to a back-biting reaction in which the growing chain end of trioxane attacks the oxygen atom in its own chain with depolymerization of tetraoxane.     

Two-dimensional infrared (2D IR) spectroscopy. A new tool for interpreting infrared spectra

Two-dimensional infrared (2D IR) spectroscopy is used to study atactic polystyrene. 2D IR is a technique based on time-resolved detection of IR signals in response to an external perturbation, such as mechanical strain. Since different chemical functional groups respond to the applied perturbation at unique and often different rates, characteristic time-dependent variations of the IR-band intensities are observed. Correlation analysis of the dynamic variation of the IR signals yields a new spectrum defined by two independent wave numbers. Peaks located on a 2D IR spectral plane imply interactions and connectivities among chemical functional groups. By spreading convoluted IR bands over two dimensions, the spectral resolution is also greatly enhanced.     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

Large Eddy Simulation of a Free-Burning Arc Discharge in Argon with a Turbulent Cross Flow and External Field

In most of the numerical approaches proposed for modeling high-intensity plasma-arcs, the effects of turbulence on the arc structure are often excluded because of the intricate physics originating from the interaction of turbulent scales, high-temperature gas dynamics, magnetohydrodynamics (MHD) and chemical kinetics. The goal of this study is threefold: to develop a generic turbulent MHD model to simulate free-burning arc discharges, to validate the code with available experimental data, and to investigate the effect of an external field and turbulent cross flow on the free-burning arc configuration. The governing equations are solved in conservative form using a hybrid scheme that combines a high-order monotonic upwind scheme with a second-order central scheme. The fluid and MHD turbulence are resolved using a large eddy simulation (LES) approach with a recently developed sub-grid closure model. An implicit scheme is used to compute the magnetic diffusion term appearing in the magnetic induction equation to alleviate the severe time-step constraint. The comparison of the model prediction with experimental data for Argon arcs at different current intensities shows generally good agreement. When an external field is applied, the overall shape of the free-burning arc drastically changes. The straightening of the arc indicates the potential for stabilization of a free-burning arc by magnetic forces. Even though the turbulence is significantly attenuated as a result of the thermal expansion near the cathode, it adds an unsteady characteristic to the arc and, in general, has a negative impact on the stabilization of the electrical discharge.     

Quest towards ultimate performance in superconducting nanowire single photon detectors

正In 2007,superconducting nanowire single photon detectors(SSPD or SNSPD)[1]made an outstanding impact in the field of quantum information technology by demonstrating quantum key distribution(QKD)over a 200-km optical fiber with a 42-dB optical loss using a practical SNSPD system[2].This successful demonstration was realized thanks to its extremely     

Tentative Comparison of Tube Radial Distribution Chromatography and CZE

Tube radical distribution chromatography (TRDC) uses an untreated open tubular capillary tube and a ternary mixture of solvents (water and hydrophilic/hydrophobic organic solvents) as a carrier solution. A model analyte mixture comprising 1-naphthol, 1-naphthoic acid, 1-naphthalenesulfonic acid, 2,6-naphthalenedisulfonic acid, and 1,3,6-naphthalenetrisulfonic acid was examined by the TRDC and capillary zone electrophoresis (CZE) systems that comprised mainly a capillary tube and a detector. In the TRDC system the elution order of analytes could be changed by altering the component ratios of the solvents, whereas in the CZE system the elution order was changed by altering the electroosmotic flow direction. The experimental data obtained provide clues about the features and utility of TRDC as a new separation method.     

Biosynthetic Conclusions from the Functional Dissection of Oxygenases for Biosynthesis of Actinorhodin and Related Streptomyces Antibiotics

1. Download : Download high-res image (332KB)
2. Download : Download full-size image

Highlights? ActVA-ORF5 is a flavin-dependent monooxygenase required for actinorhodin biosynthesis ? ActVA-ORF5 and its three close homologs were functionally dissected ? ActVA-ORF5 and Gra-21 are bifunctional at C-6/C-8, while Med-7 acts only for C-6 ? AlnT exhibits different regiospecificity for oxidation of tricyclic substrates     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.