Some novel layered-silicate nanocomposites based on a biodegradable hydroxybutyrate copolymer

This paper describes the preparation, characterization, mechanical properties and thermal stability of layered silicate nanocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHB-co-PHH, known as Nodax^TM). The dispersed phases were organically modified montmorillonites (clay 20A and clay 25A), mica, and talc, and they were introduced by solution mixing. Wide-angle X-ray scattering results and transmission electron microscopy (TEM) images confirmed that these two clays were intercalated and finely distributed in the Nodax^TM matrix. This type of layered filler led to remarkable improvements in mechanical properties even at very low loadings. Minimizing aggregation was more of a problem in the case of the mica and the talc, at least in this particular matrix. In some cases, these layered fillers slightly decreased the thermal stability of the Nodax^TM.     

Low temperature properties of acetonitrile confined in MCM-41

The effect of confinement on the phase changes and dynamics of acetonitrile in mesoporous MCM-41 was studied by use of adsorption, FT-IR, DSC, and quasi-elastic neutron scattering (QENS) measurements. Acetonitrile molecules in a monolayer interact strongly with surface hydroxyls to be registered and perturb the triple bond in the C[triple bond]N group. Adsorbed molecules above the monolayer through to the central part of the cylindrical pores are capillary condensed molecules (cc-acetonitrile), but they do not show the hysteresis loop in adsorption-desorption isotherms, i.e., second order capillary condensation. FT-IR measurements indicated that the condensed phase is very similar to the bulk liquid. The cc-acetonitrile freezes at temperatures that depend on the pore size of the MCM-41 down to 29.1 A (C14), below which it is not frozen. In addition, phase changes between alpha-type and beta-type acetonitriles were observed below the melting points. Application of the Gibbs-Thomson equation, assuming the unfrozen layer thickness to be 0.7 nm, gave the interface free energy differences between the interfaces, i.e., Deltagamma(l/alpha) = 22.4 mJ m(-2) for the liquid/pore surface (ps) and alpha-type/ps, and Deltagamma(alpha/beta) = 3.17 mJ m(-2) for alpha-type/ps and beta-type/ps, respectively. QENS experiments substantiate the differing behaviors of monolayer acetonitrile and cc-acetonitrile. The monolayer acetonitrile molecules are anchored so as not to translate. The two Lorentzian analysis of QENS spectra for cc-acetonitriles showed translational motion but markedly slowed. However, the activation energy for cc-acetonitrile in MCM-41 (C18) is 7.0 kJ mol(-1) compared to the bulk value of 12.7 kJ mol(-1). The relaxation times for tumbling rotational diffusion of cc-acetonitrile are similar to bulk values.     

High-resolution solid-state MAS 73Ge NMR spectra of some organogermanes

High-resolution solid-state magic angle spinning (73)Ge NMR spectra of some organogermanium compounds were measured. Most tetrasubstituted germanes with identical substituents exhibited signals except for one case. Tetrasubstituted germanes with two kinds of different but somewhat similar substituents exhibited broad peaks. Trisubstituted germanes failed to show signals, indicating the importance of symmetry around germanium.     

Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

Design and preparation of pulsatile release tablet as a new oral drug delivery system.

To achieve time-controlled or site specific delivery of a drug in the gastrointestinal tract, an orally applicable pulsatile drug release system with the dry-coated tablet form was developed. The system consisted of a less water permeable outer shell and a swellable core tablet; from such a system, the drug was expected to be rapidly released after a certain period of time on the basis of time-controlled disintegration mechanism. Various model disks of outer shell, consisting of hydrogenated castor oil and polyethyleneglycol 6000, were tested for their water penetration rate. The experimental results showed that water penetration proceeded obeying the boundary retreating mechanism, so that the lag time of the system could be controlled by changing either the thickness or the composition of the outer shell. The swelling force of various commercially available disintegrants was quantitatively compared, and it was found that carboxymethylcellulose calcium was the preferable disintegrant to be used for the core tablet. On the basis of the results of a series of fundamental studies, various pulsatile release tablets of isoniazide with different lag times were designed. In the in vitro dissolution test, typical pulsatile release was achieved for all the tablets prepared, and a good correlation was found between the observed lag time and the estimated lag time calculated from an empirical equation deduced from the thickness and polyethyleneglycol 6000 content of the outer shell.     

Synthesis of aryltriethoxysilanes via rhodium(I)-catalyzed cross-coupling of aryl electrophiles with triethoxysilane

The general and efficient silylation of aryl halides has been developed utilizing triethoxysilane and a rhodium catalyst. The substrate scope is broad and includes ortho-, meta-, and para-substituted electron-rich and -deficient aryl iodides. In addition, the silylation of aryl bromides and fluoroalkanesulfonates proceeded in the presence of tetra-n-butylammonium iodide.     

Crystal structure of a methyl(methoxy)carbene complex of nickel(II), trans-[Ni(C6Cl5)(PMe2Ph)2{C(OMe)Me}]BF4

The structure of a nickel(II) complex, trans-[Ni(C₆Cl₅)(PMe₂Ph)₂{C(OMe)Me}]BF₄, containing the simplest alkyl(alkoxy)carbene ligand has been determined by X-ray crystallography (R = 0.091). The geometry around the nickel atom is square-planar. The comparatively short NiC(1) bond length of 1.843(10) Å showed the presence of π-bonding in the nickel-carbene bond.     

The photochemical characteristics of aromatic enediyne compounds substituted with electron donating and electron withdrawing groups

trans- and cis-1-(4-Dimethylaminophenyl)-6-(4-nitrophenyl)hex-3-ene-1,5-diynes (trans- and cis-DANE) were synthesized and their photochemical properties were studied. The absorption spectra of trans-DANE red-shifted compared with the parent compound bisphenylethynylethene (BEE) due to intramolecular charge transfer. The fluorescence spectra, Stokes shift, fluorescence lifetime, fluorescence quantum yield, and quantum yield of trans-to-cis photoisomerization of trans-DANE showed strong dependence upon the solvent polarity in the less-polar region. No fluorescence emission from trans-DANE was observed in medium-polar and polar solvents. The quantum yield of cis-to-trans isomerization was almost solvent independent. The donor-acceptor substituents shifted the equilibrium between the trans perpendicular triplet state and the trans planar triplet state to the trans triplet state, and resulted in an increase in the triplet lifetime. Comparison of the photochemical properties of trans-DANE with trans-4-dimethylamino-4'-nitrostilbene (DANS) suggests that trans-DANE is a possible fluorescent probe in the non-polar region.     

Synthetic and theoretical studies of cyclobuta[1,2:3,4]dicyclopentene. Organocobalt intermediates in the construction of the unsaturated carbon skeleton and their transformation into novel cobaltacyclic complexes by C-C insertion

Theoretical and synthetic studies of the tricyclic 10pi-electron hydrocarbon cyclobuta[1,2:3,4]dicyclopentene (1), a nominally aromatic structure that has never been synthesized, are described. Geometry optimization by density-functional-theory calculations (B3LYP/6-31G(d,p)) predict that 1 is a D(2h) symmetric structure with nonalternant C-C single and double bonds. The calculations also predict that 1 is 4.7 kcal/mol higher in energy than the isomeric hydrocarbon 1,6-didehydro[10]annulene (2), a molecule known to isomerize to 1,5-didehydronaphthalene (4) above -50 degrees C. Calculated enthalpic changes of homodesmotic reactions support the notion that 1 is an aromatic molecule with a resonance stabilization energy (RSE) about half to two-thirds that of benzene on a per-molecule basis. Investigations of potential synthetic pathways to 1 initially utilized as starting material the tricyclic carbonate 11, the product of an intramolecular [2 + 2]-photocyclization reaction. In these studies, 11 was transformed in several steps to the distannane 12, which upon treatment with boron fluoride ethyl etherate is believed to have formed the unstable hydrocarbon bicyclopentadienylidene (13). In an effort to avoid cleavage of the central, four-membered ring of unsaturated tricyclo[5.3.0.0(2,6)]decane intermediates (perhaps the result of 10-electron electrocyclic ring opening of the tetraene 8), synthetic approaches to 1 employing cobalt-cyclobutadiene complexes 18 and 19 were pursued. Treatment of 18 with excess methyllithium led to the novel cobaltacyclic product 30, and dehydration of 19 in the presence of pyridine produced the ring-opening cobaltacyclic product 35. It is proposed that both processes may occur by a 10-electron electrocyclic ring-opening reaction of eta(2)-organocobalt intermediates. These processes may be related to the hypothetical transformation of tetraene 8 to bicyclopentadienylidene (13).