Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

Reaction of α-haloester having internal double bond with the low-valent metal complex

The α-haloester having an internal double bond was allowed to react with a catalytic amount of Pd(PPh₃)₄ to afford a cyclized product in a fairly good yield and the same product was obtained by treatment with Pd(OAc)₂ to ketene silyl acetal.     

Synthesis of aryltriethoxysilanes via rhodium(I)-catalyzed cross-coupling of aryl electrophiles with triethoxysilane

The general and efficient silylation of aryl halides has been developed utilizing triethoxysilane and a rhodium catalyst. The substrate scope is broad and includes ortho-, meta-, and para-substituted electron-rich and -deficient aryl iodides. In addition, the silylation of aryl bromides and fluoroalkanesulfonates proceeded in the presence of tetra-n-butylammonium iodide.     

Crystal structure of a methyl(methoxy)carbene complex of nickel(II), trans-[Ni(C6Cl5)(PMe2Ph)2{C(OMe)Me}]BF4

The structure of a nickel(II) complex, trans-[Ni(C₆Cl₅)(PMe₂Ph)₂{C(OMe)Me}]BF₄, containing the simplest alkyl(alkoxy)carbene ligand has been determined by X-ray crystallography (R = 0.091). The geometry around the nickel atom is square-planar. The comparatively short NiC(1) bond length of 1.843(10) Å showed the presence of π-bonding in the nickel-carbene bond.     

The photochemical characteristics of aromatic enediyne compounds substituted with electron donating and electron withdrawing groups

trans- and cis-1-(4-Dimethylaminophenyl)-6-(4-nitrophenyl)hex-3-ene-1,5-diynes (trans- and cis-DANE) were synthesized and their photochemical properties were studied. The absorption spectra of trans-DANE red-shifted compared with the parent compound bisphenylethynylethene (BEE) due to intramolecular charge transfer. The fluorescence spectra, Stokes shift, fluorescence lifetime, fluorescence quantum yield, and quantum yield of trans-to-cis photoisomerization of trans-DANE showed strong dependence upon the solvent polarity in the less-polar region. No fluorescence emission from trans-DANE was observed in medium-polar and polar solvents. The quantum yield of cis-to-trans isomerization was almost solvent independent. The donor-acceptor substituents shifted the equilibrium between the trans perpendicular triplet state and the trans planar triplet state to the trans triplet state, and resulted in an increase in the triplet lifetime. Comparison of the photochemical properties of trans-DANE with trans-4-dimethylamino-4'-nitrostilbene (DANS) suggests that trans-DANE is a possible fluorescent probe in the non-polar region.     

Synthetic and theoretical studies of cyclobuta[1,2:3,4]dicyclopentene. Organocobalt intermediates in the construction of the unsaturated carbon skeleton and their transformation into novel cobaltacyclic complexes by C-C insertion

Theoretical and synthetic studies of the tricyclic 10pi-electron hydrocarbon cyclobuta[1,2:3,4]dicyclopentene (1), a nominally aromatic structure that has never been synthesized, are described. Geometry optimization by density-functional-theory calculations (B3LYP/6-31G(d,p)) predict that 1 is a D(2h) symmetric structure with nonalternant C-C single and double bonds. The calculations also predict that 1 is 4.7 kcal/mol higher in energy than the isomeric hydrocarbon 1,6-didehydro[10]annulene (2), a molecule known to isomerize to 1,5-didehydronaphthalene (4) above -50 degrees C. Calculated enthalpic changes of homodesmotic reactions support the notion that 1 is an aromatic molecule with a resonance stabilization energy (RSE) about half to two-thirds that of benzene on a per-molecule basis. Investigations of potential synthetic pathways to 1 initially utilized as starting material the tricyclic carbonate 11, the product of an intramolecular [2 + 2]-photocyclization reaction. In these studies, 11 was transformed in several steps to the distannane 12, which upon treatment with boron fluoride ethyl etherate is believed to have formed the unstable hydrocarbon bicyclopentadienylidene (13). In an effort to avoid cleavage of the central, four-membered ring of unsaturated tricyclo[5.3.0.0(2,6)]decane intermediates (perhaps the result of 10-electron electrocyclic ring opening of the tetraene 8), synthetic approaches to 1 employing cobalt-cyclobutadiene complexes 18 and 19 were pursued. Treatment of 18 with excess methyllithium led to the novel cobaltacyclic product 30, and dehydration of 19 in the presence of pyridine produced the ring-opening cobaltacyclic product 35. It is proposed that both processes may occur by a 10-electron electrocyclic ring-opening reaction of eta(2)-organocobalt intermediates. These processes may be related to the hypothetical transformation of tetraene 8 to bicyclopentadienylidene (13).     

A direct hydrogen-1 and phosphorus-31 nuclear magnetic resonance cation solvation study of Al(ClO4)3, Ga(ClO4)3, In(ClO4)3, UO2(ClO4)2, and UO2(NO3)2 in water-acetone-dimethylsulfoxide and water-acetone-hexamethylphosphoramide mixtures

A competitive solvation study of Al(ClO₄)₃, Ga(ClO₄)₃, In(ClO₄)₃, UO₂(ClO₄)₂, and UO₂(NO₃)₂ in water-acetone-dimethylsulfoxide (DMSO) and water-acetone-hexamethylphosphoramide (HMPT) mixtures has been carried out by direct H¹ and P³¹ nuclear magnetic resonance (NMR) techniques. At low temperature, proton and ligand exchange are slow enough in these systems to permit the observation of signals for bulk and coordinated molecules of water and the organic bases (DMSO and HMPT). Both DMSO and HMPT compete effectively with water for coordination sites in the Al³⁺, Ga³⁺, and In³⁺ systems, with steric effects dominating the HMPT results. Both Al³⁺ and In³⁺ are able to bind a maximum of two to three HMPT molecules, for example. In contrast, UO²⁺ is solvated selectively by the organic molecules to the allowed maximum of 4 molecules per cation. H¹ and P³¹ NMR spectral results support the formation of only the mono-, tri-, and tetra-HMPT solvation complexes.     

Determination of 4-alkylphenols by novel derivatization and gas chromatography-mass spectrometry

A simple and sensitive method for the determination of alkylphenols in water samples has been developed using gas chromatography-mass spectrometry. Alkylphenols were determined after the extractive derivatization with pentafluoropyridine. The derivatization of alkylphenols efficiently proceeded to give the corresponding 4-tetrafluoropyridyl derivatives under the biphasic reaction system. The derivatization conditions including the phase-transfer catalyst, the amount of pentafluoropyridine, the reaction time, the concentration of NaOH and organic solvent were optimized. On the mass spectra of these derivatives, intense specific ion peaks were observed: m/z 256 for 4-n-alkylphenols and m/z 284 for 4-tert.-alkylphenols. Calibration curves were linear in the range of 20-1000 ng/l (200-10,000 ng/l for nonylphenol), and the detection limits varied between 6.93 and 15.7 ng/l (85.2 ng/l for nonylphenol). The average recoveries of the alkylphenols in a fortified river water sample (100 ng/l except for nonylphenol: 1000 ng/l) ranged from 91.1 to 112%. The relative standard deviations were found to be between 5.6 and 16%. This method was successfully applied to the determination of alkylphenols in river water.