Evaluation of sphingomyelin,cholester, and phosphatidylcholine-based immobilized artificial membrane liquid chromatography to predict drug penetration across the blood-brain barrier

Over the past decades, several in vitro methods have been tested for their ability to predict drug penetration across the blood-brain barrier. So far, in high-performance liquid chromatography, most attention has been paid to micellar liquid chromatography and immobilized artificial membrane (IAM) LC. IAMLC has been described as a viable approach, since the stationary phase emulates the lipid environment of a cell membrane. However, research in IAMLC has almost exclusively been limited to phosphatidylcholine (PC)-based stationary phases, even though PC is only one of the lipids present in cell membranes. In this article, sphingomyelin and cholester stationary phases have been tested for the first time towards their ability to predict drug penetration across the blood-brain barrier. Upon comparison with the PC stationary phase, the sphingomyelin- and cholester-based columns depict similar predictive performance. Combining data from the different stationary phases did not lead to improvements of the models. Figure

Schematic representation of how IAM-LC is used to predict drug penetration across the blood-brain barrier.     

Borane Adducts of Aromatic Phosphorus Heterocycles: Synthesis,Crystallographic Characterization and Reactivity of a Phosphinine-B(C6F5)3 Lewis Pair

A phosphinine-borane adduct of a Me₃Si-functionalized phosphinine and the Lewis acid B(C₆F₅)₃ has been synthesized and characterized crystallographically for the first time. The reaction strongly depends on the nature of the substituents in the α-position of the phosphorus heterocycle. In contrast, the reaction of B₂H₆ with various substituted phosphinines leads to an equilibrium between the starting materials and the phosphinine–borane adducts that is determined by the Lewis basicity of the phosphinine. The novel phosphinine borane adduct ( 6 -B(C₆F₅)₃) shows rapid and facile insertion and [4+2] cycloaddition reactivity towards phenylacetylene. A hitherto unknown dihydro-1-phosphabarrelene is formed with styrene. The reaction with an ester provides a new, facile and selective route to 1-R-phosphininium salts. These salts then undergo a [4+2] cycloaddition in the presence of Me₃Si−C≡CH and styrene to cleanly form unprecedented derivatives of 1-R-phosphabarrelenium salts.     

Light-Sensitive Phenacyl Crosslinked Dextran Hydrogels for Controlled Delivery**

Stimuli-responsive soft materials enable controlled release of loaded drug molecules and biomolecules. Controlled release of potent chemotherapeutic or immunotherapeutic agents is crucial to reduce unwanted side effects. In an effort to develop controlled release strategies that can be triggered by using Cerenkov luminescence, we have developed polymer hydrogels that can release bovine serum albumin and immunoglobulin G by using light (254 nm–375 nm) as a trigger. We describe the synthesis and photochemical characterization of two light sensitive phenacyl bis-azide crosslinkers that are used to prepare transparent self-supporting hydrogel patches. One crosslinker was designed to optimize the overlap with the Cerenkov luminescence emission window, bearing an π-extended phenacyl core, resulting in a high quantum yield (14 %) of photocleavage when irradiated with 375 nm light. We used the extended phenacyl crosslinker for the preparation of protein-loaded dextran hydrogel patches, which showed efficient and selective dosed release of bovine serum albumin or immunoglobulin G after irradiation with 375 nm light. Cerenkov-triggered release is as yet inconclusive due to unexpected side-reactivity. Based on the high quantum yield, efficient release and large overlap with the Cerenkov window, we envision application of these photosensitive soft materials in radiation targeted drug release.     

Irradiation of Fe–Mn@SiO2 with microwave energy enhanced its Fenton-like catalytic activity for the degradation of methylene blue

Research on Chemical Intermediates - The application of microwave energy in the synthesis of catalytic materials has been indicated to induce desirable effects that lead to improved activity....     

Platinum Indolylphosphine Fluorido and Polyfluorido Complexes: An Interplay between Cyclometallation,Fluoride Migration,and Hydrogen Bonding

The reaction of [PtCl₂(COD)] (COD=1,5-cyclooctadiene) with diisopropyl-2-(3-methyl)indolylphosphine (iPr₂P(C₉H₈N)) led to the formation of the platinum(ii ) chlorido complexes, cis-[PtCl₂{iPr₂P(C₉H₈N)}₂] ( 1 ) and trans-[PtCl₂{iPr₂P(C₉H₈N)}₂] ( 2 ). The cis-complex 1 reacted with NEt₃ yielding the complex cis-[PtCl{κ²-(P,N)-iPr₂P(C₉H₇N)}{iPr₂P(C₉H₈N)}] ( 3 ) bearing a cyclometalated κ²-(P,N)-phosphine ligand, while the isomer 2 with a trans-configuration did not show any reactivity towards NEt₃. Treatment of 1 or 3 with (CH₃)₄NF (TMAF) resulted in the formation of the twofold cyclometalated complex cis-[Pt{κ²-(P,N)-iPr₂P(C₉H₇N)}₂] ( 4 ). The molecular structures of the complexes 1–4 were determined by single-crystal X-ray diffraction. The fluorido complex cis-[PtF{κ²-(P,N)-iPr₂P(C₉H₇N)}{iPr₂P(C₉H₈N)}] ⋅ (HF)₄ ( 5 ⋅ (HF)₄) was formed when complex 4 was treated with different hydrogen fluoride sources. The Pt(ii ) fluorido complex 5 ⋅ (HF)₄ exhibits intramolecular hydrogen bonding in its outer coordination sphere between the fluorido ligand and the NH group of the 3-methylindolyl moiety. In contrast to its chlorido analogue 3 , complex 5 ⋅ (HF)₄ reacted with CO or the ynamide 1-(2-phenylethynyl)-2-pyrrolidinone to yield the complexes trans-[Pt(CO){κ²-(P,C)-iPr₂P(C₉H₇NCO)}{iPr₂P(C₉H₈N)}][F(HF)₄] ( 7 ) and a complex, which we suggest to be cis-[Pt{C=C(Ph)OCN(C₃H₆)}{κ²-(P,N)-iPr₂P(C₉H₇N)}{iPr₂P(C₉H₈N)}][F(HF)₄] ( 9 ), respectively. The structure of 9 was assigned on the basis of DFT calculations as well as NMR and IR data. Hydrogen bonding of HF and NH to fluoride was proven to be crucial for the existence of 7 and 9 .     

Chemical Probing of the Human Sirtuin 5 Active Site Reveals Its Substrate Acyl Specificity and Peptide‐Based Inhibitors

Sirtuins are NAD⁺‐dependent deacetylases acting as sensors in metabolic pathways and stress response. In mammals there are seven isoforms. The mitochondrial sirtuin 5 is a weak deacetylase but a very efficient demalonylase and desuccinylase; however, its substrate acyl specificity has not been systematically analyzed. Herein, we investigated a carbamoyl phosphate synthetase 1 derived peptide substrate and modified the lysine side chain systematically to determine the acyl specificity of Sirt5. From that point we designed six potent peptide‐based inhibitors that interact with the NAD⁺ binding pocket. To characterize the interaction details causing the different substrate and inhibition properties we report several X‐ray crystal structures of Sirt5 complexed with these peptides. Our results reveal the Sirt5 acyl selectivity and its molecular basis and enable the design of inhibitors for Sirt5.     

Carbon–chalcogen bond formation initiated by [Al(NONDipp)(E)]− anions containing Al–E{16} (E{16} = S,Se) multiple bonds

Multiply-bonded main group metal compounds are of interest as a new class of reactive species able to activate and functionalize a wide range of substrates. The aluminium sulfido compound K[Al(NON^Dipp)(S)] (NON^Dipp = [O(SiMe₂NDipp)₂]²⁻, Dipp = 2,6-ⁱPr₂C₆H₃), completing the series of [Al(NON^Dipp)(E)]⁻ anions containing Al–E{16} multiple bonds (E{16} = O, S, Se, Te), was accessed via desulfurisation of K[Al(NON^Dipp)(S₄)] using triphenylphosphane. The crystal structure showed a tetrameric aggregate joined by multiple K⋯S and K⋯π(arene) interactions that were disrupted by the addition of 2.2.2-cryptand to form the separated ion pair, [K(2.2.2-crypt)][Al(NON^Dipp)(S)]. Analysis of the anion using density functional theory (DFT) confirmed multiple-bond character in the Al–S group. The reaction of the sulfido and selenido anions K[Al(NON^Dipp)(E)] (E = S, Se) with CO₂ afforded K[Al(NON^Dipp)(κ²E,O-EC{O}O)] containing the thio- and seleno-carbonate groups respectively, consistent with a [2 + 2]-cycloaddition reaction and C–E bond formation. An analogous cycloaddition reaction took place with benzophenone affording compounds containing the diphenylsulfido- and diphenylselenido-methanolate ligands, [κ²E,O-EC{O}Ph₂]²⁻. In contrast, when K[Al(NON^Dipp)(E)] (E = S, Se) was reacted with benzaldehyde, two equivalents of substrate were incorporated into the product accompanied by formation of a second C–E bond and complete cleavage of the Al–E{16} bonds. The products contained the hitherto unknown κ²O,O-thio- and κ²O,O-seleno-bis(phenylmethanolate) ligands, which were exclusively isolated as the cis-stereoisomers. The mechanisms of these cycloaddition reactions were investigated using DFT methods.

Reaction of Al–E (E = S, Se) multiple bonds with C O functionalities generates new C–E bonds.     

How to predict viscous fingering in three component flow

In a WAG process (Water Alternate Gas), water and a miscible solvent (gas) are injected into a reservoir containing water and oil. The solvent will finger through the oil, leading to early breakthrough and poor recovery. Compared with a miscible flood, when only solvent is injected, fingering is supressed by the simultaneous injection of water, since this reduces the apparent mobility contrast between the injected and displaced fluids. The fingering in a miscible flood, with only hydrocarbon flowing, can be modelled successfully using a Todd and Longstaff fractional flow. In this paper, we demonstrate how to modify the effective Todd and Longstaff mobility ratio self-consistently to account for fingering in three component systems. The resultant empirical equations of flow are solved exactly in one dimension and are in excellent agreement with the averaged saturation and concentration profiles computed using two dimensional high resolution simulation, for a variety of injected water saturations, in both secondary and tertiary displacements.     

The effect of nearby bubbles on array gain

The coherent processing of signals from multiple hydrophones in an array offers improvements in angular resolution and signal-to-noise ratio. When the array is steered in a particular direction, the signals arriving from that direction are added in phase, and any signals arriving from other directions are not. Array gain (AG) is a measure of how much the signal arriving from the steering direction is amplified relative to signals arriving from all other directions. The subject of this paper is the manner in which the AG of an acoustic array operating in water that contains air bubbles is affected by scattering from nearby bubbles. The effects of bubbles on acoustic attenuation and dispersion are considered separately from their effects on AG. Acoustic measurements made in bubbly water using the AB Wood tank at the Institute of Sound and Vibration Research, University of Southampton, in June 2008 show that as bubble density increases, relative phase shifts in individual hydrophone signals increase and signal correlation among the hydrophones is reduced. A theory and numerical simulation linking bubble density at the hydrophone to the AG is in good agreement with the measurements up to the point where multiple scattering becomes important.     

Performance of a prototype microwave frequency standard based on laser-detected,trapped171Yb+ ions

A microwave frequency standard based on buffer gas-cooled¹⁷¹Yb⁺ ions confined in a linear Paul trap has been demonstrated in prototype form. The standard exhibits a fractional frequency instability characterised by an Allan deviation of (_y() = 2.9 × 10^–13–1/2 for < 2 × 10⁴ s. Factors affecting the stability of the standard have been systematically investigated.