Clays as selective catalysts in organic synthesis

Suitably modified smectite clays can be very selective catalysts for a wide range of organic reactions. While it has long been known that such materials can act as Bronsted and Lewis acids, it has been shown recently that they are also effective Diels-Alder catalysts. A selection of illustrative reactions is given which emphasises their wide range of use, their selectivity, and the ease of work-up after reaction. In each case, mechanistic information is presented, e.g., on the site of reaction (whether interlayer or surface), rate determining steps, etc. The regiochemical consequences of the restricted reaction space are stressed.Based on material presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

The determination of oxygen in silicon by alpha and helium-3 activation analysis

A non-destructive analytical method for oxygen in silicon by both helium-3 and α-particle activation analysis was applied to different samples, containing 0.05–10 p.p.m. of oxygen. The accuracy and precision of the method were studied. For concentrations above 1 p.p.m., the average coefficient of variation is about 6% for α-activation and 13% for helium-3 activation. For concentrations of about 60 p.p.b., the corresponding figure is about 20%. The results of both methods, which agree within 8%, are compared to infrared analysis. The determination limit of the method is 4 p.p.b. for helium-3 activation and 22 p.p.b. for α-activation.     

Interferences in the determination of trace elements in high-purity tin

Reactor neutron activation analysis of antimony, indium and cadmium in high-purity tin is interfered with by nuclear reactions on the tin matrix. For a number of interfering reactions the cross-sections were determined. The following results were obtained:¹²²Sn(n,γ)^123mSn:σ_th=0.145 barn, I=0.79 barn;¹²²Sn(n,γ)¹¹³Sn:σ_th=0.52, I=25.4 barn;¹¹²Sn(n, 2n)¹¹¹Sn: microbarn;¹¹⁸Sn(n, α)¹¹⁵Cd: microbarn; and¹¹⁴Sn(n, p)^114m1In: microbarn.     

EXCITATION ENERGY TRANSFER IN THE CRYPTOPHYTES. FLUORESCENCE EXCITATION SPECTRA AND PICOSECOND TIME-RESOLVED EMISSION SPECTRA OF INTACT ALGAE AT 77 K

Excitation spectra of chlorophyll- a (Chl- a ) fluorescence in intact cells of Cryptomonas ovata, Chroomonas pauciplastida and Chroomonas salina were determined at 77 K. For all species the excitation spectra for emission from Chl- a associated with photosystem II (PSII) showed increased contributions by a carotenoid (493 nm) and phycobiliproteins, and decreased contributions by carotenoid (417 nm, 505 nm) and Chl- a (445 nm) as compared to excitation spectra for emission from Chl- a associated with photosystem I (PSI). Excitation spectra of C. salina and C. ovata showed an increased contribution by Chl- c ² to PSII Chl- a fluorescence emission. In all three species the absorbance band positions of Chl- a , as determined from the excitation spectra, were similar to those previously described in green plants. green algae and phycobilisome-containing organisms. Time-resolved 77 K fluorescence emission spectra of C. ovata and C. salina showed successive emission from both phycoerythrin and Chl- c ², PSII Chl- a , and PSI Chl- a. C. pauciplastida showed successive emission from phycocyanin, PSII Chl- a , and PSI Chl- a. Spectral red-shifts with time were observed for the phycobiliprotein peaks in all three species. The fluorescence decay of phycoerythrin in C. ovata and C. salina was faster than that of phycocyanin in C. pauciplastida. The results are discussed in relation to the organization of the antenna pigments of PSII and PSI in the cryptophyte algae.     

Stable Hydrogen-Bonded Spherical Capsules Formed from Self-Assembly of Pyrogallol[4]arenes

The self-assemblies of two pyrogallol[4]arenes held together by 48 intermolecular hydrogen bonds stably associate in the form of spherical hexameric capsules. The molecular structures of two hexameric capsules with large interior space were analyzed by single crystal X-ray crystallography.     

Synthesis of C2-symmetric trans-2,6-diarylpiperidinones via aryl cuprate addition: an unexpected stereochemical outcome

An efficient procedure for the preparation of trans-2,6-diaryl piperidinones has been developed. Addition of aryl Grignard reagents to 2-aryl dihydropyridones under catalytic copper promoted conditions generates the trans isomer exclusively, an unprecedented stereochemical event. The X-ray structures of both starting material and product have been solved and shed light on the steric constraints and substrate geometry leading to the observed product. The reaction conditions tolerate a variety of aromatic nucleophiles to generate C₂-symmetric products in good overall yields.     

Excited-state characters and dynamics of [W(CO)(5)(4-cyanopyridine)] and [W(CO)(5)(piperidine)] studied by picosecond time-resolved IR and resonance Raman spectroscopy and DFT calculations: roles of W --> L and W --> CO MLCT and LF excited states revised

The characters, dynamics, and relaxation pathways of low-lying excited states of the complexes [W(CO)(5)L] [L = 4-cyanopyridine (pyCN) and piperidine (pip)] were investigated using theoretical and spectroscopic methods. DFT calculations revealed the delocalized character of chemically and spectroscopicaly relevant molecular orbitals and the presence of a low-lying manifold of CO pi-based unoccupied molecular orbitals. Traditional ligand-field arguments are not applicable. The lowest excited states of [W(CO)(5)(pyCN)] are W --> pyCN MLCT in character. They are closely followed in energy by W --> CO MLCT states. Excitation at 400 or 500 nm populates the (3)MLCT(pyCN) excited state, which was characterized by picosecond time-resolved IR and resonance Raman spectroscopy. Excited-state vibrations were assigned using DFT calculations. The (3)MLCT(pyCN) excited state is initially formed highly excited in low-frequency vibrations which cool with time constants between 1 and 20 ps, depending on the excitation wavelength, solvent, and particular high-frequency nu(CO) or nu(CN) mode. The lowest excited states of [W(CO)(5)(pip)] are W --> CO MLCT, as revealed by TD-DFT interpretation of a nanosecond time-resolved IR spectrum that was measured earlier in a low-temperature glass (Johnson, F. P. A.; George, M. W.; Morrison, S. L.; Turner, J. J. J. Chem. Soc., Chem. Commun. 1995, 391-393). MLCT(CO) excitation involves transfer of electron density from the W atom and, to a lesser extent, the trans CO to the pi orbitals of the four cis CO ligands. Optical excitation into MLCT(CO) transition of either complex in fluid solution triggers femtosecond dissociation of a W-N bond, producing [W(CO)(5)(solvent)]. It is initially vibrationally excited both in nu(CO) and anharmonicaly coupled low-frequency modes. Vibrational cooling occurs with time constants of 16-22 ps while the intramolecular vibrational energy redistribution from the v = 1 nu(CO) modes is much slower, 160-220 ps. No LF excited states have been found for the complexes studied in a spectroscopically relevant range up to 6-7 eV. It follows that spectroscopy, photophysics, and photochemistry of [W(CO)(5)L] and related complexes are well described by an interplay of close-lying MLCT(L) and MLCT(CO) excited states. The high-lying LF states play only an indirect photochemical role by modifying potential energy curves of MLCT(CO) states, making them dissociative.     

Cluster Chemsitry. 96. Penta- and hexa-nuclear ruthenium cluster complexes derived from reactions of cyclopentadienes with Ru5(μ5-C2PPh2)(μ-PPh2)(CO)13

The reactions between Ru₅( ₅-C₂PPh₂)(gm-PPh₂(CO)₁₃ (1) and cyclopentadienes afforded the hexanuclear clusters Ru₆( ₆-C)( ₃-PPh₂)₂(CO)₁₀(-C₅ R ₅) [R ₅ = H₅ (2), H₄Me (3), Me₅ (4)] which contain an encapsulated carbide and a face-capping ₃-CH group, formed by cleavage of CC and CP bonds of the C₂PPh₂ moiety in1. In the reaction with cyclopentadiene, the unusual ligand C₁₃H₁₂O, formed by combination of C₂, CO and two molecules of C₅H₆ (or one molecule of dicyclopentadien), was characterized in the complex Ru₅( ₄-PPh) ( ₄-C₁₃H₁₂O)(-PPh₂(CO)₁₁(-C₅H₅) (5). In the reaction with pentamethylcyclopentadiene, the vinylidene complex Ru₅( ₃-CCHPh)( ₄-PPh)( ₄-PPh) (-PPh₂)(CO)₉(-C₅Me₅) (6) was also formed.     

Determination of trace impurities in tin by neutron activation analysis

A method was developed for the determination of 15 trace elements in tin. High-purity tin samples (99.9999% and 99.999%) as well as tin of technical quality were analysed. Reactor neutron activation of the tin samples was followed by distillation of the matrix activities from a HBr−H₂SO₄ medium and Ge(Li) gamma-ray spectrometry of the distillation residue. The sensitivity of the method is generally high. For the high-purity samples the detection limits vary from 0.02 ppb (scandium) to 200 ppb (iron) for irradiation of 1 g of tin for 1 week at a thermal flux of 5·10¹²n·cm⁻². ·sec⁻¹. To decontaminate the surface of the tin samples, pre- and post-irradiation etching procedures were applied. The efficiency of these etching techniques was studied.