N-Doped Carbon Nanofibers Encapsulating CoO@Co9S8 Nanoparticles: Preparation from S-Rich Co32 Coordination Cluster Precursors by Electrospinning and Application for Superior Li-ion Storage

Thiacalixarene-supported Co₃₂nanoclusters encapsulated in polyacrylonitrile nanofibers(Co₃₂@PAN-NFs) by electrospinning have been utilized as precursors to fabricate N-doped CoO@Co₉S₈ carbon nanofibers(CoO@Co₉S₈@CNFs) for superior Li-ion storage. The S-rich Co₃₂ clusters capped by organic sheets afforded the well dispersed cobalt oxide/sulfide nanoparticles embedded in carbon nanofiber composites by direct calcination. The N-doped CoO@Co₉S₈@CNFs nanocomposites have been utilized as anode materials for lithium ion battery with the reversible capabilities being of 1051.8, 967.6, 894.7, 782.7, 669.5 and 525.4 mA·h/g at 0.1, 0.2, 0.5, 1, 2 and 3 A/g, respectively. The CoO@Co₉S₈@CNFs also showed a relatively high stable capacity of 551.7 mA·h/g at the current density of 1 A/g after 200 cycles of rate experiments. The as-obtained N-doped CoO@Co₉S₈@CNFs nanocomposites exhibited superior reversible capacity, rate performance, Coulomb efficiency(74.5% vs. 63.9%) and cyclic stability comparing with the CoO@Co₉S₈@C derived from simple annealing of Co₃₂ templates.     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

基于极少量采样的彩绘文物颜料成分分析

随着文物保护理念的提升,越来越提倡文物样品的无损或微损分析;同时由于文物样品的复杂性,对分析技术提出了更加严苛的要求.彩绘类文物的颜料分析研究,对其文物信息的提取,以及古代人类历史、社会、文化的研究和阐述具有重要作用.结合本研究组前期的研究成果,本研究提出了一种在极少量采样的情况下,分析研究文物颜料的方法,并用于榆林卧...     

固相萃取-超高效液相色谱-串联质谱法测定兽药制剂中巴比妥类药物

建立了固相萃取,结合超高效液相色谱-串联质谱(UPLC-MS/MS)测定兽药制剂中巴比妥、苯巴比妥、司可巴比妥和异戊巴比妥4种药物的方法.样品采用乙腈提取,HLB固相萃取柱净化,在ACQUITY BEH C18色谱柱(100 mm×2.1 mm,1.7 μm)上,以乙腈和水溶液为流动相梯度洗脱,质谱以多反应监测(MRM...     

电化学免疫传感器检测TET1蛋白

基于Ten-eleven translocation 1(TET1)蛋白催化5-甲基胞嘧啶(5-Methylcytosine,5mC)生成5-羟甲基胞嘧啶(5-Hydroxymethylcytosine,5hmC),结合5hmC抗体的免疫识别反应,建立了一种电化学分析方法用于TET1蛋白的特异性检测.以金纳米颗粒(Au...     

Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.     

利用“网包法”制备高效液相色谱大环抗生素类手性固定相

万古霉素和替考拉宁都属于糖肽类的大环抗生素，具有立体的环状结构和多个手性中心，是两种常见的手性识别材料，广泛应用于对映体的色谱手性分离分析。该文以万古霉素和替考拉宁为手性选择剂，哌嗪为单体，4，4'-二苯基甲烷二异氰酸酯（MDI）、1，6-己二异氰酸酯（HDI）和2，4-甲苯二异氰酸酯（TDI）为交联剂，通过界面聚合反应形成网状层包裹硅胶载体的方法制得6种高效液相色谱手性固定相，用于分离外消旋化合物，并与MDI直接交联万古霉素和替考拉宁在硅胶表面所得固定相进行了比较。结果表明，利用"网包法"和直接交联法制备的手性柱与商品万古霉素和替考拉宁柱之间具有互补性，均对不同的外消旋体有不同程度的拆分。     

A thermochemical study of dissociative ionization of 4,4-dimethyl-1-thia-4-silacyclohexane and 2,3,3-trimethyl-1-thia-3-silacyclopentane. Decomposition pathways to produce a dimethylsilanethione ion-radical [Me2SiS]+•

The dissociative ionization of 4,4-dimethyl-1-thia-4-silacyclohexane (I) and 2,3,3-trimethyl-1-thia-3-silacyclopentane(II) has been studied by electron photoionization (PI) mass spectrometric methods. The molecular ion fragmentation is mainly related to the loss of ethylene and results in a [Me₂SiSC₂H₄]^+? (m/z 118) ion-radical (A). Further loss of ethylene from A produces a dimethylsilanethione [Me₂SiS]^+? (m/z 90) ion-radical (B). The latter is the most abundant ion in the mass spectra of I and II at 70 eV.The ionization energies (IE) of I (8.22 ± 0.07 eV) and II (8.06 ± 0.03 eV) and the appearance energies (AE) of ion-radicals A and B have been determined. Also, the following heats of formation were calculated (kJ/mol): ΔH_f⁰(I) = ?31.1; ΔH_f⁰(II) = ?65.8; ΔH_f⁰(M_I^+?) = 762.0; ΔH_f⁰(M_II^+?)= 712.1; ΔH_f⁰(A)_aver = 780.2; ΔH_f⁰(B)_aver = 847.7.     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

金属离子与腺嘌呤异构体复合物的稳定性

在B3LYP/6-311++G**//6-31+G*基组水平上结合PCM模型系统的优化了气相和液相环境中14种腺嘌呤异构体与四种金属离子(Na+,K+,Mg2+,Ca2+)形成的132个稳定复合物。通过能量对比,得到了所有复合物异构体在气液两相中的稳定性顺序及不同金属离子与同一异构体形成的复合物的能量排序,首次给出了液相中这些不同金属离子复合物的最稳定结构。结果发现溶剂效应导致了液相中的复合物稳定性顺序与气相中的相比发生了很大变化;同一异构体与不同金属离子形成的复合物其稳定性在排序中也变化很大。对于这些变化,本文分别从金属离子与腺嘌呤的复合物在气相中的结合能(EBE)及在液相中的溶质溶剂相互作用能(Epol)能等方面进行了系统的阐述