Strategies for differentiation of isobaric flavonoids using liquid chromatography coupled to electrospray ionization mass spectrometry

Flavonoids are a class of secondary plant metabolites existing in great variety in nature. Due to this variety, identification can be difficult, especially as overlapping compounds in both chromatographic separations and mass spectrometric detection are common. Methods for distinguishing isobaric flavonoids using MS² and MS³ have been developed. Chromatographic separation of various plant extracts was done with RP‐HPLC and detected with positive ESI‐MS operated in information‐dependent acquisition (IDA) mode. Two methods for the determination of flavonoid identity and substitution pattern, both featuring IDA criteria, were used together with the HPLC equipment. A third method where the collision energy was ramped utilized direct infusion. With the developed strategies, it is possible to differentiate between many isobaric flavonoids. Various classes of flavonoids were found in all of the plant extracts, in the red onion extract 45 components were detected and for 29 of them the aglycone was characterized, while the substituents were tentatively identified for 31 of them. For the strawberry extract, those numbers were 66, 30 and 60, and for the cherry extract 99, 56 and 71. The great variety of flavonoids, several of them isobaric, found in each of the extracts highlights the need for reliable methods for flavonoid characterization. Methods capable of differentiating between most of the isobars analyzed have been developed. Copyright © 2014 John Wiley & Sons, Ltd.     

Aggressive dereplication using UHPLC–DAD–QTOF: screening extracts for up to 3000 fungal secondary metabolites

In natural-product drug discovery, finding new compounds is the main task, and thus fast dereplication of known compounds is essential. This is usually performed by manual liquid chromatography-ultraviolet (LC-UV) or visible light-mass spectroscopy (Vis-MS) interpretation of detected peaks, often assisted by automated identification of previously identified compounds. We used a 15 min high-performance liquid chromatography–diode array detection (UHPLC–DAD)–high-resolution MS method (electrospray ionization (ESI)⁺ or ESI^?), followed by 10–60 s of automated data analysis for up to 3000 relevant elemental compositions. By overlaying automatically generated extracted-ion chromatograms from detected compounds on the base peak chromatogram, all major potentially novel peaks could be visualized. Peaks corresponding to compounds available as reference standards, previously identified compounds, and major contaminants from solvents, media, filters etc. were labeled to differentiate these from compounds only identified by elemental composition. This enabled fast manual evaluation of both known peaks and potential novel-compound peaks, by manual verification of: the adduct pattern, UV–Vis, retention time compared with log D, co-identified biosynthetic related compounds, and elution order. System performance, including adduct patterns, in-source fragmentation, and ion-cooler bias, was investigated on reference standards, and the overall method was used on extracts of Aspergillus carbonarius and Penicillium melanoconidium, revealing new nitrogen-containing biomarkers for both species.     

Complexation of Am(III) and Nd(III) by 1,10-Phenanthroline-2,9-Dicarboxylic Acid

The complexant 1,10-phenanthroline-2,9-dicarboxylic acid (PDA) is a planar tetradentate ligand that is more preorganized for metal complexation than its unconstrained analogue ethylendiiminodiacetic acid (EDDA). Furthermore, the backbone nitrogen atoms of PDA are aromatic, hence are softer than the aliphatic amines of EDDA. It has been hypothesized that PDA will selectively bond to trivalent actinides over lanthanides. In this report, the results of spectrophotometric studies of the complexation of Nd(III) and Am(III) by PDA are reported. Because the complexes are moderately stable, it was necessary to conduct these titrations using competitive equilibrium methods, competitive cation complexing between PDA and diethylenetriaminepentaacetic acid, and competition between ligand protonation and complex formation. Stability constants and ligand protonation constants were determined at 0.1 mol·L^?1 ionic strength and at 0.5 mol·L^?1 ionic strength nitrate media at 21 ± 1 °C. The stability constants are lower than those predicted from first principles and speciation calculations indicate that Am³⁺ selectivity over Nd³⁺ is less than that exhibited by 1,10-phenanthroline.     

Cone motion viscosity and optical second harmonic generation of ferroelectric liquid crystalline dendrimers

We report second harmonic generation in a ferroelectric liquid crystalline trimer and ferroelectric liquid crystalline dendrimers of first, second and third generation. Thin cells were filled with the compounds by capillary forces at elevated temperature, and cooled from the surface stabilized ferroelectric state to below the glass transition temperature, while kept in an electric field. The cone motion viscosity and the threshold electric field for unwinding of the helix axis of the chiral tilted smectic mesophases were studied separately at elevated temperature, and these data were used to optimize the preparation of the films. The measured response time was between 0.3 and 3ms, which corresponds to a cone motion viscosity between 0.5 and 50 Pa s. Second harmonic generation was studied both at elevated temperature with an electric field and at room temperature with and without electric field. The first generation dendrimer exhibited a strong increase in the second order non-linear optical response with time at room temperature. The d ₂₃-coefficient of this dendrimer was approximately four times larger than for the other macromolecules and was 0.045 pm V^-1. The relatively large d-coefficient of the first generation dendrimer is ascribed to crystallization, which improved the orientation of the molecular dipoles.     

Diffusion-direction-dependent imaging: a novel MRI approach for peripheral nerve imaging

A novel magnetic resonance imaging approach, called diffusion-direction-dependent imaging (DDI), is introduced. Due to inherent anisotropic diffusion properties, peripheral nerves can be visualized on diffusion tensor imaging (DTI). The largest signal attenuation on DTI correlates with the direction of a nerve fiber, and the least signal attenuation correlates with the direction perpendicular to the nerve fiber. Since low signal-to-noise ratio is a concern in peripheral nerve DTI, we explored a new approach focusing on the perpendicular diffusion direction. A 36-gradient diffusion direction scheme was used. A mean expected curve specific for peripheral nerves was calculated based on the sciatic nerve and its division into the common peroneal nerve and the tibial nerve in three healthy volunteers. By a simple postprocessing method, a comparison of the mean expected curve and the measured curve was made voxel by voxel, and the sciatic nerve and its division were reconstructed, excluding other tissues. More studies are needed to investigate whether other postprocessing methods or other diffusion direction schemes are more suited for peripheral nerve imaging with DDI. Further studies may also be of interest to investigate whether DDI can be a complementary method to conventional T(1)-weighted and T(2)-weighted sequences in the imaging of peripheral nerve pathology or even in the visualization of other tissues, possibly with different diffusion direction schemes.     

New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines

Polyelectrolytes have been used extensively in the papermaking industry for various purposes. Although recent studies have shown that polyamines can be efficient dry-strength additives, the mechanism governing the strength enhancement of paper materials following the adsorption of polyamines onto pulp fibres is still not well understood. In this study, the effect of the adsorption of polyallylamine hydrochloride (PAH) onto the surface of unbleached kraft pulp fibres was investigated on both the fibre and the network scale. Isolated fibre crosses were mechanically tested to evaluate the impact of the chemical additive on the interfibre joint strength on the microscopic scale and the effect was compared with that previously observed on the paper sheet scale. X-ray microtomography was used to understand structural changes in the fibrous network following the adsorption of a polyamine such as PAH. Using image analysis methods, it was possible to determine the number of interfibre contacts (or joints) per unit length of fibre as well as the average interfibre joint contact area. The results showed that the median interfibre joint strength increased by 18 % upon adsorption of PAH. This can be achieved both by a larger molecular contact area in the contact zones and by a stronger molecular adhesion. The addition of the polymer also increased the number of efficient interfibre contacts per sheet volume. This combination of effects is the reason why polyamines such as PAH can increase the dry tensile strength of paper materials.     

Rapid Autoxidation Forms Highly Oxidized RO2 Radicals in the Atmosphere

Gas‐phase oxidation routes of biogenic emissions, mainly isoprene and monoterpenes, in the atmosphere are still the subject of intensive research with special attention being paid to the formation of aerosol constituents. This laboratory study shows that the most abundant monoterpenes (limonene and α‐pinene) form highly oxidized RO₂ radicals with up to 12 O atoms, along with related closed‐shell products, within a few seconds after the initial attack of ozone or OH radicals. The overall process, an intramolecular ROO→QOOH reaction and subsequent O₂ addition generating a next R′OO radical, is similar to the well‐known autoxidation processes in the liquid phase (QOOH stands for a hydroperoxyalkyl radical). Field measurements show the relevance of this process to atmospheric chemistry. Thus, the well‐known reaction principle of autoxidation is also applicable to the atmospheric gas‐phase oxidation of hydrocarbons leading to extremely low‐volatility products which contribute to organic aerosol mass and hence influence the aerosol–cloud–climate system.     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.     

Preparation of La0.75Sr0.25MnO3 Nano-Phase Powders and Films from Alkoxide Precursors

The first purely alkoxide-based sol-gel route to nano-phase powders and thin films of perovskite La_0.75Sr_0.25MnO₃ is described. The phase and microstructure evolution on heat treatment of free gel films to form the target nano-phase oxide were investigated by TGA, IR spectroscopy, powder XRD, SEM and TEM-EDS. The xerogel consisted of a hydrated oxo-carbonate, without remaining alkoxo groups or solvent. Heating at 5°C·min^–1 decomposed the carbonate groups and yielded the pure perovskite La_0.75Sr_0.25MnO₃ at 760°C. The cell dimensions were virtually unchanged from the first observation of perovskite at 680°C, to 1000°C, 4 h. The monoclinic cell of La_0.75Sr_0.25MnO₃ obtained at 1000°C, 4 h, had the dimensions a = 5.475(1), b = 5.504(2), c = 7.771(1) Å, = 90.50(2), fitting the literature data quite well. Crack-free, homogenous, 150 nm thick La_0.75Sr_0.25MnO₃ films were prepared by spin-coating Si/SiO₂/TiO₂/Pt and polycrystalline -Al₂O₃ substrates with a 0.6 M alkoxide solution, followed by heating at 5°C·min^–1 to 800°C, 30 min.