Identification of α-type subunits of the Xenopus 20S proteasome and analysis of their changes during the meiotic cell cycle

Background  

The 26S proteasome is the proteolytic machinery of the ubiquitin-dependent proteolytic system responsible for most of the regulated intracellular protein degradation in eukaryotic cells. Previously, we demonstrated meiotic cell cycle dependent phosphorylation of α4 subunit of the 26S proteasome. In this study, we analyzed the changes in the spotting pattern separated by 2-D gel electrophoresis of α subunits during Xenopus oocyte maturation.     

Small-angle x-ray scattering from solution of rodlike particles with length distribution

The scattering function of rods with a constant radius, 8 Å, and a length distribution of the Schulz–Zimm type was calculated on a computer as a model of helical synthetic polypeptide. The influence of length and length distribution on the scattered intensity of small-angle x-ray scattering was clarified. As length grows and length distribution broadens it is difficult to obtain reliable values of molecular weight and radius of gyration from a Zimm plot. The influence of length distribution on the mass per unit length, M_q, and the radius of gyration of the cross section, 〈S〉^1/2, from the Guinier plot of the cross-sectional factor decreases as the length increases, and reliable values of M_q and 〈S〉^1/2 can be obtained even for rods with wide distribution for rods more than 600 Å long. In particular, it is pointed out that the value of 〈S〉^1/2 is little influenced by length and length distribution.     

Cytotoxic diterpenoids from Vietnamese medicinal plant Croton tonkinensis GAGNEP

Six new ent-kaurane-type diterpenoids were isolated from the leaves of the endemic Vietnamese medicinal plant Croton tonkinensis GAGNEP. (Euphorbiaceae) together with three known ent-11alpha-acetoxy-7beta,14alpha-dihydroxykaur-16-en-15-one (1), ent-kaur-16-en-15-one 18-oic acid (5) and ent-18-hydroxykaur-16-ene (7). Their structures were determined by spectroscopic analyses to be ent-7beta-acetoxy-11alpha-hydroxykaur-16-en-15-one (2), ent-18-acetoxy-11alpha-hydroxykaur-16-en-15-one (3), ent-11alpha-acetoxykaur-16-en-18-oic acid (4), ent-15alpha,18-dihydroxykaur-16-ene (6), ent-11alpha,18-diacetoxy-7beta-hydroxykaur-16-en-15-one (8), and ent-(16S)-1alpha,14alpha-diacetoxy-7beta-hydroxy-17-methoxykauran-15-one (14). ent-Kaurane-type diterpenoids from Croton tonkinensis 2-4, 6, and 9-13, were tested for toxicity in the brine shrimp lethality assay. Compounds 9, 10, and 12 demonstrated significant activity, compounds 2, 3, 6, and 11 showed weak activity, and compounds 4 and 13 were inactive.     

Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

Supramolecular assembly based on π-π stacking and π-cation interactions between thiacalix[6]arene and DMF

The molecular assembly of thiacalix[6]arene was formed by π-π stacking and π-DMF interactions between thiacalix[6]arene and adjoining thiacalix[6]arene and between thiacalix[6]arene and DMF, respectively. The X-ray crystal analysis also revealed that hydroxyl groups of thiacalix[6]arene adopted novel two sets of hydrogen bond with two DMF and intramolecular hydrogen bond between phenolic units, which cause to make 1,2,3-alternate configuration structure of thiacalix[6]arene.     

Carbapenem and penem antibiotics. VI. Synthesis and antibacterial activity of 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl 1-methylcarbapenems

The synthesis and antibacterial activity of the 1-methylcarbapenems, 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl derivatives having a 6-[(R)-1-hydroxyethyl] side chain, are described. The introduction of a methyl substituent at the C-1 position was accomplished by a newly developed procedure using crotyl halides and zinc dust. The 2-hydroxymethyl carbapenems as key intermediates allowed an easy entry into the preparation of title carbapenems.     

Lewis acid-catalyzed asymmetric hydroxymethylation of silicon enolates in aqueous media

Asymmetric hydroxymethylation of silicon enolates with formaldehyde in aqueous media has been achieved using praseodymium triflate and a chiral crown ether. Formaldehyde aqueous solution can be directly used for the reactions, and a water/THF mixture was found to be the best solvent system. This is the first example of catalytic asymmetric hydroxymethylation of silicon enolates.     

The Raman and infrared spectrum of hexachloro-disilazane

The Raman and IR spectra of hexachlorodisilazane were measured, and the assignment carried out by comparison with those of the structurally related compounds, hexachlorodisiloxane, hexachlorodisilane and dimethylamine. The vibrational spectra of hexachlorodisilazane are very closely related to those of hexachlorodisiloxane, hexachlorodisilane and dimethylamine, and can be interpreted in terms of a non-rigid D_3d symmetry with an internal rotation.     

Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.     

Technical study for SPECT of the head using slant hole collimator

The performance of a 160 keV slant hole collimator (160 keV SH) was compared with that of a 140 keV high resolution collimator (140 keV HR) for SPECT imaging of the head using 99mTc. The minimum radius of revolution was reduced from about 23 cm to 13 cm using 160 keV SH. Relative sensitivity of the 160 keV SH was 108% of that of the 140 keV HR. Compared with SPECT using 140 keV HR, 160 keV SH SPECT yielded approximately a 15% increase in resolution. The 160 keV SH SPECT images of phantom were superior in resolution and contrast to that of 140 keV HR SPECT. We concluded that high quality SPECT images of the head can be obtained from rotating gamma cameras equipped with slant hole collimators.