High-performance liquid chromatographic determination of oligomeric procyanidins from dimers up to the hexamer in hawthorn

An HPLC method using UV diode array detection was developed for analysing procyanidins qualitatively and quantitatively up to the hexameric level in hawthorn samples. The analysed compounds included procyanidin dimers B-2, B-4 and B-5, procyanidin trimers C-1, epicatechin-(4beta-->8)-epicatechin-(4beta-->6)-epicatechin and epicatechin-(4beta-->6)-epicatechin-(4beta-->8)-epicatechin, a tetramer D-1 and a pentamer E-1 both consisting of (-)-epicatechin units linked through C-4beta/C-8 bonds. The concentrations of two unknown tetramers and a hexamer F were also quantified. The oligomeric procyanidins (OPs) were specifically determined due to the development of a method for isolating them from hawthorn during sample preparation. The pattern of oligomeric procyanidins in the leaves, flowers and fruits was similar, but the concentrations varied depending on the part of the plant. The concentration in leaves was 1.6%, in flowers 1.2% and in fruits 0.2% of the dry mass. The method was validated with respect to repeatability, recovery, linearity, and sensitivity. The repeatability for the quantitative analytical method of all the OPs in leaves was 7.7%, in flowers 8.8%, and in fruits 12.3%. The recovery of the main OPs ranged from 91 to 97%. The correlation coefficients of calibration curves were between 0.997 and 1.000. The limits of quantitation for different procyanidin standards were 0.05-0.12 mg/ml, when 10 microl of each standard solution was injected into the HPLC.     

A special method of deformational correction in N.M.R. of molecules dissolved in liquid crystals

Abstract

A simple method of deformational correction for the N.M.R. spectral parameters of molecules dissolved in liquid crystals is described. The method is applicable to the different isotopically substituted derivatives of the molecules belonging to the cubic point groups. Its validity is verified for the dipolar and quadrupolar couplings observed in the molecules CH₄, CD₄ and CH₃D dissolved in the liquid crystals Merck Phase IV, Merck ZLI 1167 and their mixtures.     

Application of self-organizing maps in conformational analysis of lipids.

The characteristics of lipid assemblies are important for the functions of biological membranes. This has led to an increasing utilization of molecular dynamics simulations for the elucidation of the structural features of biomembranes. We have applied the self-organizing map (SOM) to the analysis of the complex conformational data from a 1-ns molecular dynamics simulation of PLPC phospholipids in a membrane assembly. Mapping of 1.44 million molecular conformations to a two-dimensional array of neurons revealed, without human intervention, the main conformational features in hours. Both the whole molecule and the characteristics of the unsaturated fatty acid chains were analyzed. All major structural features were easily distinguished, such as the orientational variability of the headgroup, the mainly trans state dihedral angles of the sn-1 chain, and both straight and bent conformations of the unsaturated sn-2 chain. Furthermore, presentation of the trajectory of an individual lipid molecule on the map provides information on conformational dynamics. The present results suggest that the SOM method provides a powerful tool for routinely gaining rapid insight to the main molecular conformations as well as to the conformational dynamics of any simulated molecular assembly without the requirement of a priori knowledge.     

Effect of catalyst systems and reaction conditions on the synthesis of cellulose‐g‐PDMAam copolymers by controlled radical polymerization

Various copper‐based catalyst systems and reaction conditions were studied in the graft copolymerization of N,N‐dimethylacrylamide (DMAam) with a cellulose‐based macroinitiator by controlled radical polymerization. The cellulose macroinitiator with degree of substitution DS = 0.44 was synthesized from dissolving softwood pulp in a LiCl/DMAc solution. The graft copolymerizations of DMAam, using the cellulose macroinitiator and various copper‐based catalyst systems, were then carried out in DMSO solutions. The copolymerization kinetics was followed by ¹H NMR. Water‐soluble cellulose‐g‐PDMAam copolymers were comprehensively characterized by ATR‐FTIR and ¹H NMR spectroscopies and SEC analyses. DLS and steady‐shear viscosity measurements revealed that when the DP_graft of the cellulose‐g‐PDMAam copolymer is high enough, the copolymer forms a more compact structure in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Surface nanostructure effects on optical properties of Pb(Zr x Ti1−x )O3 thin films

Optical scattering properties of nanostructured matter have crucial impact on performance efficiency of various photonic components, such as waveguides, display elements, and solar cells. In this paper, diffuse transmission properties of nanocrystalline Pb(Zr _x Ti_1?x )O₃ thin films with a high refractive index of ~2.5 and optical transmittance are presented. Thin films with a thicknesses ranging from 50 to 500 nm were studied using integrating sphere technique and results were compared to simulations performed by a scalar scattering theory. Thin films were deposited by pulsed laser deposition at room temperature on MgO(100) substrates and post-annealed at a temperature of 800 °C. Structural phase evolution-induced surface effects, which introduced periodicity on the film surface, cause the definite diffuse elements in transmission spectra of the films. Low and evenly distributed scattering amplitudes in k-space were seen for highly tetragonal- or trigonal-oriented films with non-textured surfaces, which led to low diffuse transmission values (T _D ≈ 5 %), while confined and increased scattering amplitudes in k-space were seen for tetragonal–trigonal-oriented films, with phase co-existence, which led to microstructure-induced textured surfaces and increased diffuse transmission values (T _D ≈ 50 %). For highly textured surfaces, scattering amplitudes distributed in tilted ellipsoid shape in k-space was observed. Difference between modeled and measured values was 3.8 % in maximum.     

Photonic‐on‐a‐chip: a thermal actuated Mach‐Zehnder interferometer and a molecular thermometer based on a single di‐ureasil organic‐inorganic hybrid

An integrated photonic‐on‐a‐chip device based on a single organic‐inorganic di‐ureasil hybrid was fabricated for optical waveguide and temperature sensing. The device is composed by a thermal actuated Mach‐Zehnder (MZ) interferometer operating with a switching power of 0.011 W and a maximum temperature difference between branches of 0.89 ºC. The MZ interferometer is covered by a Eu³⁺/Tb³⁺ co‐doped di‐ureasil luminescent molecular thermometer with a temperature uncertainty of 0.1ºC and a spatial resolution of 13 µm. This is an uncommon example in which the same material (an organic‐inorganic hybrid) that is used to fabricate a particular device (a thermal‐actuated MZ interferometer) is also used to measure one of the device intrinsic properties (the operating temperature). The photonic‐on‐a‐chip example discussed here can be applied to sense temperature gradients with high resolution (10⁻³ ºC·µm⁻¹) in chip‐scale heat engines or refrigerators, magnetic nanocontacts and energy‐harvesting machines.     

Determination of Carbon Chain Lengths of Fatty Acid Mixtures by Time Domain NMR

Average carbon chain length is a key parameter that defines the quality of liquid biofuels. In this paper, a method for the determination of carbon chain lengths of fatty acid mixtures is presented. The approach is based on proton relaxation rates measured by time domain nuclear magnetic resonance. The spin–spin relaxation rates R ₂ were used for the estimation of the carbon chain lengths. The method was examined for the set of samples with different mean lengths of the main linear carbon chain. Samples were prepared using four different fatty acids and mixtures of two, three or four of these fatty acids. The correlation coefficient between the known and measured values was equal to 0.994. Based on the relaxation theory, a linear-like dependence between the relaxation rate and carbon chain length was briefly shown, which endorses the experimental results. The developed methodology for determining carbon chain lengths offers robustness and rapidity, which are significant advantages when it comes to online use of the method in real industrial environments.     

Electromagnetic viewpoints on a 200 kW MgB2 induction heater

In this paper an electromagnetic system for a 200 kW MgB₂ induction heater was designed to verify the feasibility of MgB₂ superconductor in a DC induction heating system. The final master plan connects the electromagnetic design to the cryogenic and mechanical designs including the required measurement system. The electromagnetic design consists of conductor development, dimensioning the superconducting magnets and the quench protection system analysis. The coil system must guarantee appropriate heating distribution in the aluminium billet. The conductor has to fulfill the requirements of the current carrying capability required by the coil design. Furthermore, the conductor layout and constituent materials affect greatly to the coil stability in fault conditions. The coil behaviour during a fault was studied by quench simulations. The protection system design was based on the results of the quench analysis.     

Modification of glass capillary gas chromatographic columns by alkylation of the glass surface with pentafluorobenzyl bromide

Summary Glass surface alkylation with pentafluorobenzyl (PFB) bromide yields glass capillary gas chromatographic columns with modified retention characteristics. Glass-alkylated OV-225 columns have been tested in the analysis of PFB fluoroacetate, and the substantial increase in retention time of this highly volatile compound was found to improve the precision of analysis. PFB-alkylated columns should prove generally useful in gas chromatographic analysis of small relative molecular mass compounds.     

An Improved On-Line HPLC-DPPH Method for the Screening of Free Radical Scavenging Compounds in Water Extracts of Lamiaceae Plants

An on-line HPLC-1,1-diphenyl-2-picrylhydrazyl (DPPH*) method has been improved for the detection of polar and nonpolar radical scavenging compounds from complex plant extracts. Eight water extracts were prepared from steam-distilled essential oil-extracted Lamiaceae plants (Origanum vulgare L., O. Onites L., O. Minutiflorum O. Schwartz et P. H. Davis, O. Syriacum L., Satureja cuneifolia Ten., Thymbra spicata L., Coridothymus capitatus (L.) Reichb. f., Majorana hortensis Moench). After the components within each extract had been separated by reverse phase chromatography using 10% to 100% methanol with 2% acetic acid as a mobile phase, analytes capable of scavenging a citric acid-sodium citrate buffered methanolic DPPH* solution were detected by post-column derivatization at 517 nm. The HPLC-DPPH* on-line method was applied to the qualitative and quantitative analysis of these Lamiaceae plant extracts. There was a strong correlation between the scavenging (negative) peak area and the concentration of the radical scavenging reference substances used. The radical scavenging compounds within the extracts were determined as benzoic acid and hydroxycinnamic acid derivatives, flavonoids and diterpenoids according to their retention time and UV spectral data. Rosmarinic acid and carnosic acid were identified as the dominant radical scavengers in these extracts by this method.