Synthesis of Drim-7,9(11)-diene and Its Hydroxylated Derivatives

This article describes a new efficient synthesis of drim-7,9(11)-diene and its hydroxylated derivates from drim-8-en-7-one. Reduction of this ketone with NaBO₄ in the presence of CeCl₃ · 7H₂O afforded regio- and stereoselectively drim-8-en-7β-ol in a high yield. Its dehydration with H₂SO₄ under mild conditions led to drim-7,9(11)-diene. Noncatalytic oxidation of drim-7,9(11)-diene with OsO₄ and the catalytic oxidation with the pair OsO₄–NMO gave, in a high yield, depending on conditions, driman-7β,8β,9α,11-tetraol or its mixture with drim-7-en-9α,11-diol and drim-9(11)-en-7α,8α-diol. Under optimal conditions the total yield of these diols reached 89%. The separate, noncatalytic oxidation of drim-7-en-9α,11-diol and of drim-9(11)-en-7α,8α-diol with OsO₄ afforded driman-7α,8α,9α,11-tetraol.     

On the applicability of the HSAB principle through the use of improved computational schemes for chemical hardness evaluation

Finite difference schemes, named Compact Finite Difference Schemes with Spectral-like Resolution, have been used for a less crude approximation of the analytical hardness definition as the second-order derivative of the energy with respect to the electron number. The improved computational schemes, at different levels of theory, have been used to calculate global hardness values of some probe bases, traditionally classified as hard and soft on the basis of their chemical behavior, and to investigate the quantitative applicability of the HSAB principle. Exchange acid-base reactions have been used to test the HSAB principle assuming the reaction energies as a measure of the stabilization of product adducts.     

The effect of PVC on thermal and catalytic degradation of polyethylene, polypropylene and polystyrene by a continuous flow reactor

A continuous flow reactor was operated at atmospheric pressure and feed rate of 0–1.5 kg h⁻¹ for degradation of PE, PP and PS in presence of 1–2 wt% PVC. The degradation temperatures were between 360 and 440 °C depending on the feeding material. The influence of PVC, temperature and silica-alumina catalysts on degradation behavior and on the properties of the products was studied and discussed. Different effects were observed for binary PE/PVC, PP/PVC, PS/PVC and complex PE/PP/PS/PVC mixtures due to specific interactions between PVC and each hydrocarbon polyolefin. Silica-alumina catalysts decreased the Cl concentration in oils but it seems to generate high amounts of Cl-containing organic compounds in gases.     

Conformational changes of strong polycations in the presence of divalent counterions and their influence upon the flocculation efficiency

The interaction between strong polycations, which possess the ammonium quaternary centers attached to an acrylic macromolecular chain derived from poly(N,N-dimethylaminoethyl methacrylate) (polycations Q_x), and divalent counterions was investigated by viscometry and turbidimetry. Conformational changes of polycations were influenced by the polycation charge density, counterion nature (SO₄²⁻ or S₂O₈²⁻) and concentration. The morphology of the polycation layers deposited onto silicon wafers has been studied by tapping mode atomic force microscopy, a strong influence of the polycation and ammonium persulfate concentration on the surface topography being observed. The optimum flocculation concentration of polycation decreased and the flocculation window increased in the presence of S₂O₈²⁻, in the destabilization of kaolin model dispersion. Removal of Congo Red from aqueous solution by the complex system formed between polycations and divalent counterions was also investigated. The behavior of polycations Q_x in separation processes was compared with that of one polycation containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride units in the backbone (PCA₅).     

The effect of silica–alumina catalysts on degradation of polyolefins by a continuous flow reactor

Catalytic degradation of polyolefins was performed in a continuous flow reactor that allows the study of the degradation processes at steady state, characterized by constant values of reaction parameters and properties of the products. The continuous flow reactor was operated at atmospheric pressure and at feed rate of 0–1.5 kg h^?1 polyolefins over two silica–alumina catalysts having different SiO₂/Al₂O₃ mole ratio. Polyethylene (PE), polypropylene (PP) and polystyrene (PS) were degraded at 420, 380 and 360 °C respectively. The cracking effect of silica–alumina was proved by the increased amount of gaseous products and by the decreased molecular weight of liquid products. The differences in surface area and in concentration and acidic strength of active centers of the two catalysts affected the distribution of degradation products. Molar rate of degradation was increased in the presence of catalysts, however the mass rate of degradation was decreased leading to higher values of the calculated activation energies. These interesting results might open new perspectives in understanding the macroscopic mechanism for catalytic degradation of polyolefins.     

Investigation of clay modifier effects on the structure and rheology of supercritical carbon dioxide‐processed polymer nanocomposites

Superior property enhancements in polymer–clay nanocomposites can be achieved if one can significantly enhance the nanoclay dispersion and polymer–clay interactions. Recent studies have shown that nanoclays can be dispersed in polymers using supercritical carbon dioxide (scCO₂). However, there is need for a better understanding of how changing the clay modifier affects the clay dispersability by scCO₂ and the resultant nanocomposite rheology. To address this, the polystyrene (PS)/clay nanocomposites with “weak” interaction (Cloisite 93A clay) and “strong” interaction (Cloisite 15A clay) have been prepared using the supercritical CO₂ method in the presence of a co‐solvent. Transmission electron microscopy images and small‐angle X‐ray diffraction illustrate that composites using 15A and 93A clays show similar magnitude of reduction in the average tactoid size, and dispersion upon processing with scCO₂. When PS and the clays are coprocessed in scCO₂, the “dispersion” of clays appears to be independent of modifier or polymer–clay interaction. However, the low‐frequency storage modulus in the scCO₂‐processed 15A nanocomposites is two orders of magnitude higher than that of 93A nanocomposites. It is postulated that below percolation (solution blended composites), the strength of polymer–clay interaction is not a significant contributor to rheological enhancement. In the scCO₂‐processed nanocomposites the enhanced dispersion passes the percolation threshold and the interactions dictate the reinforcement potential of the clay–polymer–clay network. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 823–831, 2010     

Highly Efficient Copper(II) Ion Sorbents Obtained by Calcium Carbonate Mineralization on Functionalized Cross‐Linked Copolymers

A new type of Cu^II ion sorbents is presented. These are obtained by CaCO₃ mineralization from supersaturated solutions on gel‐like cross‐linked polymeric beads as insoluble templates. A divinylbenzene–ethylacrylate–acrylonitrile cross‐linked copolymer functionalized with weakly acidic, basic, or amphoteric functional groups has been used, as well as different initial inorganic concentrations and addition procedures for CaCO₃ crystal growth. The morphology of the new composites was investigated by SEM and compared to that of the unmodified beads, and the polymorph content was established by X‐ray diffraction. The beads, before and after CaCO₃ mineralization, were tested as sorbents for Cu^II ions. The newly formed patterns on the bead surface after Cu^II sorption were observed by SEM, and the elemental distribution on the composites and the chemical structure of crystals after interaction with Cu^II were investigated by EDAX elemental mapping and by FTIR‐ATR spectroscopy, respectively. The sorption capacity increased significantly after CaCO₃ crystals growth on the weak anionic bead surface (up to 1041.5 mg Cu^II/g sample) compared to that of unmodified beads (491.5 mg Cu^II/g sample).     

Rapid identification of common hexapyranose monosaccharide units by a simple TOCSY matching approach

Solution NMR spectroscopy is a well established technique for non-destructive characterization of the structures and conformations of complex oligo- and polysaccharides. One of the key experiments involves the use of 2D TOCSY to collect the 1H spins into groups that can be associated with the individual saccharide units that are present in the molecule under study. It is well known that the magnetization transfer rate through the 1H spin system during the TOCSY spin lock period is sensitive to the intervening 3J(H,H) scalar couplings, and therefore also to the saccharide stereochemistry. Here, we have investigated the potential to extract information on the stereochemistry of hexapyranose monosaccharide units directly from TOCSY spectra. Through a systematic experimental investigation of the magnetization transfer initiated from the anomeric 1H resonance in D-glucose, D-galactose and D-mannose it is shown that a 100 ms spin lock time provides optimal spectroscopic discrimination between these three commonly occurring building blocks. A simple matching scheme is proposed as a new tool for rapid attribution of the TOCSY traces originating from the anomeric 1H resonances towards the underlying monosaccharide type. The scheme appears robust with regard to structural variations and fairly tolerant to incidental overlap. Its application provides useful guidance during the subsequent NMR assignment process, as demonstrated with the PS7F polysaccharide from Streptococcus pneumonia. In addition, we show that our scheme affords a clear-cut distinction between the alpha- and beta-epimers of D-mannose-type units, which can be difficult to discriminate by NMR analysis. Application to the N-glycan 100.2 demonstrates the potential and wide applicability of this new discrimination approach.     

Systematic formulations for electronegativity and hardness and their atomic scales within density functional softness theory

A unified Mulliken valence with Parr ground‐state electronegativity picture is presented. It provides a useful analytical tool on which the absolute hardness as well ionization potential and electron affinity functionals are based. For all these chemical reactivity indices, systematic approximate density functionals are formulated within density functional softness theory and are applied to atomic systems. For the absolute hardness, a special relationship with the new electronegativity ansatz and a particular atomic trend paralleling the absolute electron affinity are established that should complement and augment the earlier finite‐difference energetic approach. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Steric communication of chiral information observed in dendronized polyacetylenes

Structural and retrostructural analysis of helical dendronized polyacetylenes (i.e., self-organizable polyacetylenes containing first generation dendrons or minidendrons as side groups) synthesized by the polymerization of minidendritic acetylenes with [Rh(nbd)Cl]2 (nbd = 2,5-norbornadiene) reveals an approximately 10% change in the average column stratum thickness (l) of the cylindrical macromolecules with a chiral periphery, through which a strong preference for a single-handed screw-sense is communicated. The cylindrical macromolecules reversibly interconvert between a three-dimensional (3D) centered rectangular lattice (Phi r-c,k) exhibiting long-range intracolumnar helical order at lower temperatures and a two-dimensional (2D) hexagonal columnar lattice (Phi h) with short-range helical order at higher temperatures. A polymer containing chiral, nonracemic peripheral alkyl tails is found to have a larger l as compared to the achiral polymers. In methyl cyclohexane solution, the same polymer exhibits an intense signal in circular dichroism (CD) spectra, whose intensity decreases upon heating. The observed change in l indicates that the chiral tails alter the polymer conformation from that of the corresponding polymer with achiral side chains. This change in conformation results in a relatively large free energy difference (DeltaGh) favoring one helix-sense over the other (per monomer residue). The capacity to distort the polymer conformation and corresponding free energy is related to the population of branches in the chiral tails and their distance from the polymer backbone by comparison to recently reported first and second generation dendronized polyphenylacetylenes.