Electronic spectroscopy of the A1A' <-- X1A' system of CDF

To further investigate the Renner-Teller (RT) effect and barriers to linearity and dissociation in the simplest singlet carbene, we recorded fluorescence excitation spectra of bands involving the pure bending levels 2(n)(0) with n = 0-9 and the combination states 1(1)(0)2(n)(0) with n = 1-8 and 2(n)(0)3(1)(0) with n = 0-5 in the A(1)A'<-- X(1)A' system of CDF, in addition to some weak hot bands. The spectra were measured under jet-cooled conditions using a pulsed discharge source, and rotationally analyzed to yield precise values for the band origins and rotational constants; fluorescence lifetimes were also measured to probe for lifetime lengthening effects due to the RT interaction. The derived A state parameters are compared with previous results for CHF and with predictions of ab initio electronic structure theory. The approach to linearity in the A state is evidenced in a sharp increase in the A rotational constant with bending excitation, and a minimum in the vibrational intervals near 2(9). A fit of the vibrational intervals for the pure bending levels yields an A state barrier to linearity in good agreement both with that previously derived for CHF and ab initio predictions. From the spectra and lifetime measurements, the onset of extensive RT perturbations is found to occur at a higher energy than in CHF, consistent with the smaller A constant.     

Influence of surfactants on the fading of malachite green

The kinetics of the reaction between malachite green (MG) and sodium hydroxide (MG fading) was studied using a spectrophotometric method in the presence of two cationic surfactants, cetyl-benzyl-dimethyl-ammonium chloride (CBDAC) and hexadecyl-trimethylammonium bromide (HTAB) and one anionic surfactant, sodium dodecyl sulphate (SDS) at concentrations below and above critical micellar concentrations. The cationic surfactants have a catalytic effect, while the anionic surfactant has an inhibitory effect on the reaction. A kinetic model describing the influence of surfactant on reaction rate was developed. The results are discussed on the basis of electrostatic and hydrophobic interactions between the kinetic micelles and malachite green.      

Numerical modelling and simulation of Laviron treatment for poly-phenothiazine derivative-modified glassy carbon electrodes

Electropolymerization of a new phenothiazine derivative (bis-phenothiazin-3-yl methane, BPhM) on glassy carbon electrodes leads to electroactive and conducting layers of poly-BPhM. Based on the Laviron method, the kinetic parameters (the heterogeneous electron transfer rate constants k _s and transfer coefficients α) were calculated out of the experimental and theoretical data. The theoretical data have been obtained by using the analogical modelling and numerical simulating method. The modified electrodes present high values of k _s(~50s⁻¹) in phosphate buffer solutions of different pH values. A good correlation of mathematical and numerical simulated kinetic parameters has been obtained, with the experimental values and the norm of residuals being very close to zero.     

Thermal behavior of some vanadyl complexes with flavone derivatives as potential insulin-mimetic agents

Two new complexes having general formula VOL₂·nH₂O [(1) L: 5-hydroxyflavone, n = 1; (2) L: chrysin, n = 4] were synthesized and characterized. Based on IR and electronic data we concluded that studied flavones act as bidentate ligands in complexes with metallic ion coordinated in a square-pyramidal stereochemistry. The thermal analysis (TG, DTA) elucidated the composition and also the number and nature of the water molecules. The thermal behavior also indicated strong interactions between oxovanadium (IV) and these oxygen donor ligands.     

Thermal behaviour of some new complexes with bismacrocyclic ligands as potential biological active species

Novel complexes of type [M₂LCl₄]·nH₂O ((1) M:Ni, n = 5; (2) M:Cu, n = 0 and (3) M:Zn, n = 2; L: ligand resulted from 1,2-phenylenediamine, 3,6-diazaoctane-1,8-diamine and formaldehyde template condensation) were synthesised and characterised. The features of complexes have been assigned from microanalytical, IR and UV–Vis data. The thermal analyses have evidenced the thermal intervals of stability and also the thermodynamic effects that accompany them. Processes as water or hydrochloric acid elimination as well as oxidative degradation of the organic ligand were observed. Complexes display a different thermal behaviour as result of dissimilar chemical interaction of metal ions with chloride anions. The final product of decomposition was metal(II) oxide as powder X-ray diffraction indicated.     

Sensitive detection of endocrine disrupters using ionic liquid--single walled carbon nanotubes modified screen-printed based biosensors

Simple and low cost biosensor based on screen-printed electrode for sensitive detection of some alkylphenols was developed, by entrapment of HRP in a nanocomposite gel based on single-walled carbon nanotubes (SWCNTs) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) ionic liquid. Raman and FTIR spectroscopy, CV and EIS studies demonstrate the interaction between SWCNTs and ionic liquid. The nanocomposite gel, SWCNT-[BMIM][PF₆] provides to the modified sensor a considerable enhanced electrocatalytic activity toward hydrogen peroxide reduction. The HRP based biosensor exhibits high sensitivity and good stability, allowing a detection of the alkylphenols at an applied potential of −0.2 V vs. Ag/AgCl, in linear range from 5.5 to 97.7 μM for 4-t-octylphenol and respectively, between 5.5 and 140 μM for 4-n-nonylphenol, with a response time of about 5 s. The detection limit was 1.1 μM for 4-t-octylphenol, and respectively 0.4 μM for 4-n-nonylphenol (S/N = 3).     

Investigations providing a plausible mechanism in the hexamethyldisilazane-catalyzed trimerization of alkyl isocyanates

Using HMDS as catalyst for the trimerization of isocyanates presents many advantages as the expected isocyanurate is not contaminated by the catalyst or other side-products resulting from its degradation. In addition, HMDS presents a low toxicity, and is compatible with industrial applications. This article describes the hexamethyldisilazane (HMDS)-catalyzed trimerization of octylisocyanate. Experimental investigations and mechanistic considerations indicate that the true catalyst of the trimerization is trimethylsilyloctylamine, which results from the preliminary condensation of HMDS with octylisocyanate.     

Thermal degradation behavior of some ruthenium complexes with fluoroquinolone derivatives as potential antitumor agents

Three new complexes with ligands belong to the fluoroquinolone class having the general formula [RuL₂Cl₂]Cl nH₂O ((1) L: norfloxacin (nf), n = 4; (2) L: ciprofloxacin (cp), n = 3; (3) L: enrofloxacin (enro), n = 5) were synthesized and characterized by chemical analysis UV–Vis and IR spectroscopy. In all complexes fluoroquinolone derivative acts as bidentate chelate ligand. The thermal behavior steps were investigated in synthetic air flow. The thermal transformations are complex processes according to TG and DTG curves including dehydration, quinolone derivative degradation, as well as RuCl₃ conversion in RuO₂.     

Development and validation of an HPLC-MS/MS method to quantify clopidogrel acyl glucuronide, clopidogrel acid metabolite, and clopidogrel in plasma samples avoiding analyte back-conversion

A new sensitive and fast quantitative analytical method for the simultaneous determination of clopidogrel, its main metabolite clopidogrel carboxylic acid, and the newly described acyl glucuronide metabolite, in human plasma samples, is presented. The analytical procedures (plasma storage, handling, and extract storage in the autosampler) were optimized in order to avoid back-conversion; a known drawback in measurements of clopidogrel. Clopidogrel acyl glucuronide was confirmed as a major source of back-conversion to the parent drug in the presence of methanol, and thorough stability experiments were carried out to find the most appropriate conditions for an accurate analysis of clopidogrel and the two metabolites. The method was validated by assessing selectivity, sensitivity, linearity, accuracy, and precision for all three analytes, in accordance to Food and Drug Administration guidelines. Spiked quality controls in plasma as well as incurred samples were used to verify back-conversion in the selected conditions, with results meeting European Medicines Agency acceptance criteria (concentrations within 80–120% of the first reading). The method was then applied to a pharmacokinetic study, and for the first time, a pharmacokinetic curve of clopidogrel acyl glucuronide in human plasma is presented. The concentrations ranged up to 1,048.684 ng/mL, with a mean of 470.268 ng/mL, while clopidogrel had a mean C _max of 1.348 ng/mL; these orders of magnitude show how much the back-conversion of this metabolite may influence clopidogrel quantification if it is not properly controlled.     

Azulen-1-yl diazenes substituted at C-3 with phenyl-chalcogene moieties: dye synthesis, product characterization and properties

Abstract  

Two synthesis strategies were used for the generation of azulene-1-yl diazenes substituted at C-3 with a phenyl-chalcogenyl moiety, the synthesis of azulenes substituted at C-3 followed by azo-coupling and azulene substitution at C-3 in azulene-azo dyes. The last synthetic route seems to give more satisfactory results for the synthesis of the desired chalcogenic derivatives. Another target of this study was to investigate the changes induced by the phenyl-chalcogenic substitution on the NMR and UV-vis spectra, and also to compare this effect with the one exerted by halogen atoms and by strongly electron donating groups such as AcNH or PhCOO. Whereas the latter groups exhibit a strong influence on the NMR and UV-vis spectra, PhS, PhSe, or PhTe groups as well as halogen atoms produce only a small effect because of the moderate change in electron distribution over the entire molecule.