Thermal behaviour of some new complexes with bismacrocyclic ligands as potential biological active species

Novel complexes of type [M₂LCl₄]·nH₂O ((1) M:Ni, n = 5; (2) M:Cu, n = 0 and (3) M:Zn, n = 2; L: ligand resulted from 1,2-phenylenediamine, 3,6-diazaoctane-1,8-diamine and formaldehyde template condensation) were synthesised and characterised. The features of complexes have been assigned from microanalytical, IR and UV–Vis data. The thermal analyses have evidenced the thermal intervals of stability and also the thermodynamic effects that accompany them. Processes as water or hydrochloric acid elimination as well as oxidative degradation of the organic ligand were observed. Complexes display a different thermal behaviour as result of dissimilar chemical interaction of metal ions with chloride anions. The final product of decomposition was metal(II) oxide as powder X-ray diffraction indicated.     

Sensitive detection of endocrine disrupters using ionic liquid--single walled carbon nanotubes modified screen-printed based biosensors

Simple and low cost biosensor based on screen-printed electrode for sensitive detection of some alkylphenols was developed, by entrapment of HRP in a nanocomposite gel based on single-walled carbon nanotubes (SWCNTs) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) ionic liquid. Raman and FTIR spectroscopy, CV and EIS studies demonstrate the interaction between SWCNTs and ionic liquid. The nanocomposite gel, SWCNT-[BMIM][PF₆] provides to the modified sensor a considerable enhanced electrocatalytic activity toward hydrogen peroxide reduction. The HRP based biosensor exhibits high sensitivity and good stability, allowing a detection of the alkylphenols at an applied potential of −0.2 V vs. Ag/AgCl, in linear range from 5.5 to 97.7 μM for 4-t-octylphenol and respectively, between 5.5 and 140 μM for 4-n-nonylphenol, with a response time of about 5 s. The detection limit was 1.1 μM for 4-t-octylphenol, and respectively 0.4 μM for 4-n-nonylphenol (S/N = 3).     

Investigations providing a plausible mechanism in the hexamethyldisilazane-catalyzed trimerization of alkyl isocyanates

Using HMDS as catalyst for the trimerization of isocyanates presents many advantages as the expected isocyanurate is not contaminated by the catalyst or other side-products resulting from its degradation. In addition, HMDS presents a low toxicity, and is compatible with industrial applications. This article describes the hexamethyldisilazane (HMDS)-catalyzed trimerization of octylisocyanate. Experimental investigations and mechanistic considerations indicate that the true catalyst of the trimerization is trimethylsilyloctylamine, which results from the preliminary condensation of HMDS with octylisocyanate.     

Thermal degradation behavior of some ruthenium complexes with fluoroquinolone derivatives as potential antitumor agents

Three new complexes with ligands belong to the fluoroquinolone class having the general formula [RuL₂Cl₂]Cl nH₂O ((1) L: norfloxacin (nf), n = 4; (2) L: ciprofloxacin (cp), n = 3; (3) L: enrofloxacin (enro), n = 5) were synthesized and characterized by chemical analysis UV–Vis and IR spectroscopy. In all complexes fluoroquinolone derivative acts as bidentate chelate ligand. The thermal behavior steps were investigated in synthetic air flow. The thermal transformations are complex processes according to TG and DTG curves including dehydration, quinolone derivative degradation, as well as RuCl₃ conversion in RuO₂.     

Development and validation of an HPLC-MS/MS method to quantify clopidogrel acyl glucuronide, clopidogrel acid metabolite, and clopidogrel in plasma samples avoiding analyte back-conversion

A new sensitive and fast quantitative analytical method for the simultaneous determination of clopidogrel, its main metabolite clopidogrel carboxylic acid, and the newly described acyl glucuronide metabolite, in human plasma samples, is presented. The analytical procedures (plasma storage, handling, and extract storage in the autosampler) were optimized in order to avoid back-conversion; a known drawback in measurements of clopidogrel. Clopidogrel acyl glucuronide was confirmed as a major source of back-conversion to the parent drug in the presence of methanol, and thorough stability experiments were carried out to find the most appropriate conditions for an accurate analysis of clopidogrel and the two metabolites. The method was validated by assessing selectivity, sensitivity, linearity, accuracy, and precision for all three analytes, in accordance to Food and Drug Administration guidelines. Spiked quality controls in plasma as well as incurred samples were used to verify back-conversion in the selected conditions, with results meeting European Medicines Agency acceptance criteria (concentrations within 80–120% of the first reading). The method was then applied to a pharmacokinetic study, and for the first time, a pharmacokinetic curve of clopidogrel acyl glucuronide in human plasma is presented. The concentrations ranged up to 1,048.684 ng/mL, with a mean of 470.268 ng/mL, while clopidogrel had a mean C _max of 1.348 ng/mL; these orders of magnitude show how much the back-conversion of this metabolite may influence clopidogrel quantification if it is not properly controlled.     

Azulen-1-yl diazenes substituted at C-3 with phenyl-chalcogene moieties: dye synthesis, product characterization and properties

Abstract  

Two synthesis strategies were used for the generation of azulene-1-yl diazenes substituted at C-3 with a phenyl-chalcogenyl moiety, the synthesis of azulenes substituted at C-3 followed by azo-coupling and azulene substitution at C-3 in azulene-azo dyes. The last synthetic route seems to give more satisfactory results for the synthesis of the desired chalcogenic derivatives. Another target of this study was to investigate the changes induced by the phenyl-chalcogenic substitution on the NMR and UV-vis spectra, and also to compare this effect with the one exerted by halogen atoms and by strongly electron donating groups such as AcNH or PhCOO. Whereas the latter groups exhibit a strong influence on the NMR and UV-vis spectra, PhS, PhSe, or PhTe groups as well as halogen atoms produce only a small effect because of the moderate change in electron distribution over the entire molecule.     

Block copolymer containing poly(3‐hexylthiophene) and poly(4‐vinylpyridine): Synthesis and its interaction with CdSe quantum dots for hybrid organic applications

Poly(3‐hexylthiophene)‐b‐poly(4‐vinylpyridine) diblock copolymer was synthesized by RAFT polymerization of 4‐vinyl pyridine using a trithiocarbonate‐terminated poly(3‐hexylthiophene) macro‐RAFT agent. The optoelectronic properties and the morphology of the block copolymer blends with CdSe quantum dots were investigated. UV‐vis and fluorescence experiments were performed to prove the charge transfer between CdSe and poly(3‐hexylthiophene)‐b‐poly(4‐vinylpyridine) diblock copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enhancement of OFET performance of semiconducting polymers containing benzodithiophene upon surface treatment with organic silanes

Poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene} ( P1 ) homopolymer and poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene ‐alt‐thiophene} ( P2 ) alternating copolymer have been synthesized by Stille coupling polymerization. The field‐effect mobilities of both polymers were measured on both untreated and silane‐treated OFET devices. Various silanes were selected to allow an incremental increase in the hydrophobicity of the silicon dioxide dielectric. A direct correlation was observed between the hydrophobicity of the silicon dioxide dielectric surface and the enhancement of the field‐effect mobilities. The highest mobilities for both polymers were measured on the OFET devices treated with heptadecafluoro‐1,1,2,2‐tetrahydro‐decyl‐1‐trimethoxysilane (FS) which generated the most hydrophobic surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.