On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Polarographic determination of pilocarpine using the catalysed pre-wave of nickel(II)

On the basis of a detailed study of the pilocarpine-induced nickel(II) pre-wave using various polarographic techniques, an electrode process mechanism is proposed in which the formation of a catalytic complex between aquo-nickel(II) and veronalate-nickel(II) on the one hand and unprotonated pilocarpine adsorbed on the electrode surface on the other is followed by the reduction of nickel(II) in the complex and the release of the catalytic ligand. The pre-peak recorded by differential-pulse polarography in the system 1 × 10^?3 M Ni(II)-1 × 10^?2 M sodium veronal, nitric acid (pH 8.5) (with ionic strength maintained at 0.2 with sodium nitrate) can be used for quantitative determination of pilocarpine at concentrations in the range 2.5 × 10^?7-8 × 10^?6 M.     

Critical evaluation of spiking of low-grade ore samples in activation analysis for gold and uranium

In applying non-destructive neutron-activation analysis for gold and uranium in spiked low-grade ore samples, the following extrapolated unspiked concentrations were measured: 0.27₈ ± 0.01₅ ppm gold (chemical assay: 0.20₂ ± 0.02₀ ppm gold); 25.1 ± 1.1 ppm uranium (chemical assay value: 19.5 ±2.0 ppm uranium). Different approaches to the fitting of results, and the influence of spiking non-uniformity, are discussed.     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.     

13C-NMR. Spectroscopy of Naturally Occuring Substances. XLII. Conformational analysis of quebrachamine-like indole alkaloids and related substances

The ¹³C shifts of 16α- and 16β-substituted derivatives of quebrachamine, 14,15-dehydroquebrachamine, cleavamine, 15,20α-dihydrocleavamine and 15,20β-dihydrocleavamine are determined and correlated with possible conformations of these tetracycles. The method of analysis of the C(16) configuration of these compounds, which emanated from this study, is used for the determination of the configuration of the site of coupling of vindoline and cleavamine β-chloroindolenine.     

Microdetermination of phosphate with EDTA

An indirect microdetermination of phosphate via EDTA titration is described, which can be applied to minerals, soils, fertilizers, biological samples, drugs and organo-phosphorus compounds. The method is based on the precipitation of phosphate as the very insoluble silver orthophosphate (K_sp = 1.3 × 10^?20), dissolution of this precipitate in a solution of potassium cyanonickelate and titration of the nickel displaced by silver. The phosphate content is obtained indirectly by multiplying the number of ml of the titrant by a factor. The method takes about an hour after the phosphate is brought into solution. The accuracy is about 1% for samples containing 5–50 mg PO₄^3? and about 3–5% for samples with 100 to 5000 μg PO₄^3?.     

Convenient synthesis of nucleoside and isonucleoside analogues

[reaction: see text]. A very simple methodology to stereoselectively achieve tricyclic isonucleosides (nucleobase = thymine, uracil, and 5-fluoruracil) and 3'-C-branched nucleosides (nucleobase = theophylline) was performed by means of a DBU-mediated addition process using a readily available 2-bromo sugar. The mechanism for these transformations implies the loss of both substituents at C-2 and C-3 on the sugar moiety, and although it seems that DBU is probably involved, its involvement has not yet been ascertained. Cytosine did not react under these conditions.     

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO₄ and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO₄ and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of detection of 10 g 1^–1 foro-cresol and 30 g 1^–1 form-cresol were found. The flow injection method has a lower sensitivity but permits more than 80 injections per hour. Based on the different maximum absorbance wavelengths obtained for the reaction products of PAP witho-cresol (614 nm) andm-cresol (632 nm), both compounds can be simultaneously determined in water samples and recoveries of 90 to 115% were found in spiked water samples of different types.     

Polarographlc analysis for corticosteroids: Part 5. Reduction mechanism of halogen-containing corticosteroids and analysis of some preparations

In fluprednisolone and chloroprednisone acetate, the polarographic reduction of the carbon—halogen bond in position 6 occurs first. The carbanion—enolate formed is reduced at the dropping mercury electrode at more negative potentials than the conjugate acid. Controlled potential electrolysis at a mercury pool electrode where the carbanion—enolate can be protonated, yields the unsaturated ketone. Polarographic reduction of clobetasol-17-propionate and of clobetasone-17-butyrate results in cleavage of the C—Cl bond in the side-chain. This process is followed by reduction of the α,β-unsaturated ketone in the A-ring. Analytical methods for the determination of these compounds in ointments, creams and eye/ear drops gave results with standard deviations of 1–2%.