Self-focusing in new kerr media: Large thermal nonlinearity in metallotetraphenylporphins

A large optical nonlinearity of thermal origin has been observed in acetone solutions of a series of tetraphenylporphin, TPPH₂, MnTPP(CH₃CO₂ ^–), FeTTPCI^-, CoTPP, NiTPP, and CuTPP. The nonlinear Kerr coefficient is sensitively dependent on the nature of central metals in the compounds. The Mn compound exhibits the largest coefficient, 6 × 10^–5 esu, for 514 nm laser wavelength. The use of prophins offers increased flexibility in the preparation of different Kerr media.Presented at the International Workshop on Squeezed and Correlated States in Quantum Optics, Moscow, December 3–7, 1990.     

Improved Surface and Adhesion Properties of Wood-Polyethylene Composite by Treatment with Argon–Oxygen Low Pressure Plasma

Ar:O₂ low pressure plasma (Ar:O₂ LPP) surface treatment is proposed for increasing the surface energy and improve the adhesion of wood-polyethylene composite. The treatment time was varied between 20 and 90 s and the configuration of the shelves inside the plasma chamber (direct and secondary downstream) was also changed. Ar:O₂ LPP treatment during 30–40 s created new surface carbon–oxygen groups, increased the surface energy, mainly its polar component, reduced roughness and caused ablation of wood-polyethylene composite, irrespective of the configuration of the shelves inside the plasma chamber. The increase of the treatment time above 40 s did not cause additional surface modifications. Adhesion of the wood-polyethylene composite was noticeably increased when was treated with Ar:O₂ LPP. The surface modifications of Ar:O₂ LPP treated wood-polyethylene composite were partially lost during 24 h after treatment.     

A molecular mechanics study of conformational trends in simple alcohols and ethers. Part I: Geometric trends

We have modified the MM2(80) molecular mechanics force field for alcohols and ethers to reproduce geometric trends predicted by ab initio calculations with the 4-21G basis set. The results obtained with the modified force field are consistent with experimental evidence.     

Photonucleophilic aromatic substitution of 6-fluoroquinolones in basic media: triplet quenching by hydroxide anion

Photoreaction of 1-ethyl-6-fluoro-7-(1-piperazinyl)-1,4-dihydro-4-oxoquinoline-3-carboxylic acid (norfloxacin, NFX) and other 6-fluoroquinolones in aqueous solution gives rise to the corresponding 6-hydroxy derivatives. Although two mechanisms have been proposed for this photonucleophilic aromatic substitution, direct evidence for any of them is still missing. Obtaining such evidence requires work in basic media, where intramolecular electron transfer from the piperazine ring to the quinolone system is the almost exclusive singlet deactivation pathway. To overcome this problem, the 4'-N-acetyl derivative of norfloxacin (ANFX) has been employed in the present paper due to the lower availability of the N lone pair. The photochemical and photophysical properties of ANFX have been studied in aqueous solutions at pH between 7.4 and 13. As expected, fluorescence of ANFX is not significantly quenched in basic media. Furthermore, the excited triplet state (lambda(max) = 620 nm) reacts with hydroxide anions with a rate constant of (0.3 +/- 0.1) x 10(6) M(-)(1) s(-)(1). This supports a direct attack by hydroxide anions to the excited triplet state with subsequent release of fluoride as the operating mechanism. The fact that the reaction is inhibited by the presence of naproxen (a water-soluble naphthalene derivative) as triplet quencher clearly confirms the mechanistic assignment.     

Surface selectivities in wet chemically modified PVC films. Influence of reaction conditions

Wet chemical modification reactions of PVC films in solvent/nonsolvent mixtures were performed. Three thiol compounds of different size and reactivity were used varying the solvent quality, temperature, and reaction times. The evolution of the concentration gradients within the films was studied using confocal Raman spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy. Surface selectivities were calculated and discussed in terms of the different relative reaction rate constants.     

Highly sensitive analysis of multiple pesticides in foods combining solid-phase microextraction, capillary electrophoresis-mass spectrometry, and chemometrics

A highly sensitive procedure to detect multiple pesticides at trace levels in foods is presented. Initially a comparative study between capillary electrophoresis (CE)-UV and CE-mass spectrometry (MS) is carried out analyzing five pesticides not studied up to now (pyrimethanil, pyrifenox, cyprodinil, cyromazine, and pirimicarb). The comparison between CE-UV and CE-MS is established in terms of separation efficiency, speed of analysis, reproducibility, and sensitivity. A good separation of these compounds is achieved by both techniques using a volatile aqueous buffer containing 0.3 M ammonium acetate/acetic acid at pH 4. Time analysis reproducibility is studied for the same day (n = 5) and three different days (n = 15), showing no significant differences between CE-UV and CE-MS. The study on peak areas reproducibility shows a slightly worse reproducibility for CE-MS compared with CE-UV. The best limit of detection (LOD) that can be achieved for these pesticides using CE-UV was 0.6 microg/mL. CE-MS provides LODs one order of magnitude better than CE-UV. Chemometrics are used to optimize the multiple parameters that play a role in solid-phase microextraction (SPME) and CE-MS analysis (e.g., extraction and desorption times, nebulizer pressure, dry gas flow, dry gas temperature, percentage of organic solvent and acid in the sheath liquid, etc.). The combined use of chemometrics and SPME-CE-MS clearly improves the LODs that can be achieved allowing the detection of pesticides at concentrations down to 15 ng/mL. The usefulness of this approach is demonstrated detecting multiple pesticides in different food samples as grapes and orange juice in a single run. The concentrations detected are below the maximum residue limits (MRLs) permitted for these pesticides in foods corroborating the value of our approach. This work demonstrates, to our knowledge for the first time, the good possibilities of the combined use of SPME-CE-MS and chemometrics.     

Mono-, di- and trinuclear 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz)-containing copper(II) complexes: syntheses, crystal structures and magnetic properties

Three new copper(ii) complexes of formula [Cu(tppz)(NCO)(2)].0.4H(2)O (1), [Cu(2)(tppz)Br(4)](2) and [Cu(3)(tppz)(C(5)O(5))(3)(H(2)O)(3)].7H(2)O (3)[tppz = 2,3,5,6-tetrakis(2-pyridyl)pyrazine; C(5)O(5)(2-) = croconate, dianion of 4,5-dihydroxycyclopent-4-ene-1,2,3-trione] have been synthesised and structurally characterized by X-ray diffraction methods. The structure of complex is made up of neutral [Cu(tppz)(NCO)(2)] mononuclear units and uncoordinated water molecules. The mononuclear units are grouped by pairs to give a rather short copper-copper distance of 3.9244(4) angstroms. The structure of complex 1 consists of neutral tppz-bridged [Cu(2)(tppz)Br(4)] dinuclear units, the copper-copper separation across tppz being 6.6198(1) angstroms. The dinuclear units are further connected through weak, double out-of-plane Cu-Br...Cu bridges [Br(1)...Cu(1a) 4.0028(17) angstroms] creating tetranuclear entities, the copper-copper separation through this interaction being 4.3299(21) angstroms. The structure of complex 3 is built of neutral [Cu(3)(tppz)(C(5)O(5))(3)(H(2)O)(3)] trinuclear units and uncoordinated water molecules. Tppz and one of the croconate groups act as bridging ligands, the former exhibiting the bis-terdentate coordination mode and the latter adopting an unusual asymmetrical bis-bidentate bridging mode through three adjacent oxygen atoms. The other two croconate groups exhibit the bidentate coordination mode. The intramolecular copper-copper separations are 6.5417(9)(across tppz) and 4.3234(9) angstroms (through bis-bidentate croconato). The magnetic properties of 2 and 3 have been investigated in the temperature range 1.9-300 K. The magnetic behaviour of complex 2 is that of an antiferromagnetically coupled copper(II) dimer (J = -40.9 cm(-1), the Hamiltonian being H = -JS(A).S(B)). In the case of compound , the chi(M) T vs. T plot is typical of an overall antiferromagnetic coupling with a low-lying spin doublet being fully populated at T < 10 K. The values of the intramolecular antiferromagnetic interactions in 3 are -19.9 (across tppz) and -32.9 cm(-1)(through bridging croconato). Density functional type calculations were performed on model dinuclear fragments of 3 in order to analyze the efficiency of the exchange pathways involved and also to substantiate the coupling parameters.     

Kinetics of ClONO(2) reactive uptake on ice surfaces at temperatures of the upper troposphere

The reactive uptake kinetics of ClONO(2) on pure and doped water-ice surfaces have been studied using a coated wall flow tube reactor coupled to an electron impact mass spectrometer. Experiments have been conducted on frozen film ice surfaces in the temperature range 208-228 K with P((ClONO)(2)) < or = 10(-6) Torr. The uptake coefficient (gamma) of ClONO(2) on pure ice was time dependent with a maximum value of gamma(max) approximately 0.1. On HNO(3)-doped ice at 218 K the gamma(max) was 0.02. HOCl formation was detected in both experiments. On HCl-doped ice, uptake was gas-phase diffusion limited (gamma > 0.1) and gas-phase Cl(2) was formed. The uptake of HCl on ice continuously doped with HNO(3) was reversible such that there was no net uptake of HCl once the equilibrium surface coverage was established. The data were well described by a single site 2-species competitive Langmuir adsorption isotherm. The surface coverage of HCl on HNO(3)-doped ice was an order of magnitude lower than on bare ice for a given temperature and P(HCl). ClONO(2) uptake on this HCl/HNO(3)-doped ice was studied as a function of P(HCl). gamma(max) was no longer gas-phase diffusion limited and was found to be linearly dependent on the surface concentration of HCl. Under conditions of low HCl surface concentration, hydrolysis of ClONO(2) and reaction with HCl were competing such that both Cl(2) and HOCl were formed. A numerical model was used to simulate the experimental results and to aid in the parametrization of ClONO(2) reactivity on cirrus ice clouds in the upper troposphere.