99Ru and57Fe Mössbauer spectroscopy of a ruthenium alloy,RuFe2Si

⁹⁹Ru and⁵⁷Fe-Mössbauer spectroscopic and magnetization measurements were made in order to clarify the magnetic properties of a Huesler alloy, RuFe₂Si. The result obtained from⁹⁹Ru-Mössbauer spectrum leads to the conclusion that Ru atoms were substituted by both Fe[A, C] and Fe[B], but the latter preferentially.     

Synthesis and properties of aramids and polyarylates having perfluoro-substituents on the benzene ring

A new series of 16 aramids and 16 polyarylates having perfluoro-substituents on the benzene ring was prepared by a low temperature solution or an interfacial polycondensation. The effects of fluorine substituents on the structure and properties of polymers were examined. Fluorinated aramids exhibited higher crystallinity, while fluorinated polyarylates show lower crystallinity. The melting point (T_m) of aramids decreased with fluorine substitution, whereas T_m of polyarylates from fluorinated aromatic diols was higher than that of those from unfluorinated ones. The temperature of 10% weight loss and the residue at 900°C decreased with fluorine substitution except for the aramids from fluorinated diamines. Solubility and contact angle also increased with fluorine substitution. Some polyarylates were found to exhibit an optical anisotropy.     

Thermal and photo-induced phenomena in γ-irradiated poly(methyl methacrylate)

ESR spectra and optical absorption spectra of γ-irradiated poly(methyl methacrylate) (PMMA) at 77°K and the photo- and thermal bleaching behavior have been studied. γ-Irradiation of PMMA yields a singles spectrum with a line width of 6 G which is bleachable with visible light. This species is assigned to the polymer cation. The unbleached species consists mainly of a four-line spectrum and is assigned to a polymer radical having a different CH₂ conformation from the usual nine-line spectrum. On subsequent warming to room temperature, the spectrum changes into the nine-line spectrum. γ-Irradiation of PMMA containing biphenyl as an additive at 77°K gives biphenyl cation. Yield of polymer radical is reduced by the addition of biphenyl and 2-methyltetrahydrofuran. A mechanism is proposed which is consistent with the experimental results.     

2-(O-Phenylalkyl)phenoxy]alkylamines III: Synthesis and selective serotonin-2 receptor binding (2)

A series of 12-(2-phenylethyl)phenoxy]ethylpyrrolidine derivatives were synthesized, and their affinity for serotonin-2 (5-HT2) and dopamine-2 (D2) receptors was examined. Among them, compound 17, (2R,4R)-4-hydroxy-2-[2-[2-[2-(3-methoxyphenyl)ethyl]phenoxylethyl] -1-methylpyrrolidine hydrochloride, showed high 5-HT2 receptor affinity in vitro. This compound was a more potent inhibitor of ex vivo 5-HT-induced platelet aggregation than compound 3, which was previously shown to be more potent than ketanserin (1) and sarpogrelate (2a). However, compound 17 produced gastric irritation in rats. Therefore, we carried out a further derivatization of 17, and compound 45 (R-102444), a lauryl ester prodrug of compound 17, was found to be a promising candidate as an antithrombotic agent. Oral administration of R-102444 produced a marked inhibition of 5-HT-induced ex vivo platelet aggregation, and R-102444 did not cause any gastric irritation. The antiaggregatory effects of R-102444 were more potent than those of sarpogrelate (2a) and its active metabolite, M-1 (2b). In addition, R-102444 exhibited more potent antithrombotic effects than sarpogrelate in a rat photochemically-induced thrombosis model.     

Photochemical Reactions of N‐(2‐Halogenoalkanoyl) Derivatives of Anilines

The photochemical reactions of 2‐substituted N‐(2‐halogenoalkanoyl) derivatives 1 of anilines and 5 of cyclic amines are described. Under irradiation, 2‐bromo‐2‐methylpropananilides 1a – e undergo exclusively dehydrobromination to give N‐aryl‐2‐methylprop‐2‐enamides (=methacrylanilides) 3a – e (Scheme 1 and Table 1). On irradiation of N‐alkyl‐ and N‐phenyl‐substituted 2‐bromo‐2‐methylpropananilides 1f – m , cyclization products, i.e. 1,3‐dihydro‐2H‐indol‐2‐ones (=oxindoles) 2f – m and 3,4‐dihydroquinolin‐2(1H)‐ones (=dihydrocarbostyrils) 4f – m , are obtained, besides 3f – m . On the other hand, irradiation of N‐methyl‐substituted 2‐chloro‐2‐phenylacetanilides 1o – q and 2‐chloroacetanilide 1r gives oxindoles 2o – r as the sole product, but in low yields (Scheme 3 and Table 2). The photocyclization of the corresponding N‐phenyl derivatives 1s – v to oxindoles 2s – v proceeds smoothly. A plausible mechanism for the formation of the photoproducts is proposed (Scheme 4). Irradiation of N‐(2‐halogenoalkanoyl) derivatives of cyclic amines 5a – c yields the cyclization products, i.e. five‐membered lactams 6a , b , and/or dehydrohalogenation products 7a , c and their cyclization products 8a , c , depending on the ring size of the amines (Scheme 5 and Table 3).     

Synthesis of regiocontrolled polymer having 2-naphthol unit by CuCl-amine catalyzed oxidative coupling polymerization

Regiocontrolled polymer (2) having 2-naphthol unit was prepared by oxidative coupling polymerization of bis(2-naphthol) (1). Polymerizations were conducted in dichloromethane in the presence of [di-μ-hydroxo-bis(N,N,N′,N′-tetramethylethylenediamine)copper(II)] chloride [CuCl(OH)TMEDA] under air at room temperature, producing polymers with number-average molecular weights up to 12,000. The structure of polymer 2 was characterized by 270 MHz ¹H–NMR and 68.5 MHz ¹³C–NMR spectroscopies and was estimated to consist almost completely of 1,1′-linkage. The polymer was readily soluble in polar aprotic solvents and tetrahydrofuran at room temperature. Thermogravimetric analysis of polymer 2 showed 10% weight loss at 450°C in nitrogen. The model reactions were studied to clarify the applicability of CuCl(OH)TMEDA for coupling of naphthol derivatives. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3702–3709, 1999     

One-pot synthesis of dendritic polyamide

Dendritic polyamides with polydispersity of 1.1–1.4 have been successfully prepared from trimesic acid, 5-aminoisophthalic acid, and 4-aminophenylpropionic acid as a core molecule, a dendron, and a spacer unit, respectively, with a one-pot procedure. This procedure involves successive activation of end carboxyl groups with the condensing agent diphenyl (2,3-dihydro-2-thioxo-3-benzoxazolyl)phosphonate (DBOP), followed by condensation of active amide with 5-aminoisopthalic acid or 4-aminophenylpropionic acid and, finally, capping of the end carboxyl groups with p-anisidine. The structure of dendritic polyamides was investigated by ¹H-NMR spectroscopy, and it was found that the polymers obtained contained approximately 10% defects. Furthermore, the model reaction was studied to demonstrate the feasibility of dendritic polyamides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3638–3645, 1999     

Stereocontrolled Synthesis of (−)-5,11-Dideoxytetrodotoxin

New derivatives of an intriguing marine natural product are now accessible. The first asymmetric synthesis of the simple tetrodotoxin analogue, 5,11-dideoxytetrodotoxin ( 3 ), was achieved. Hydroxylation at position C8 of the key intermediate 1 relied on the neighboring trichloroacetamide group, and stereoselective elaboration of the vinyl group gave α-hydroxylactone 2 , which was transformed into the title compound through a new guanidylation method.     

Preparation and properties of imide‐containing elastic polymers from elastic polyureas and pyromellitic dianhydride

A new approach to obtain imide‐containing elastic polymers (IEPs) via elastic and high‐molecular‐weight polyureas, which were prepared from α‐(4‐aminobenzoyl)‐ω‐[(4‐aminobenzoyl)oxy]‐poly(oxytetramethylene) and the conventional diisocyanates such as tolylene‐2,4‐diisocyanate(2,4‐TDI), tolylene‐2,6‐diisocyanate(2,6‐TDI), and 4,4′‐diphenylmethanediisocyanate (MDI), was investigated. IEP solutions were prepared in high yield by the reaction of the polyureas with pyromellitic dianhydride in N‐methyl‐2‐pyrrolidone (NMP) at 165°C for 3.7–5.2 h. IEPs were obtained by the thermal treatment at 200°C for 4 h in vacuo after NMP was evaporated from the resulting IEP solutions. We assumed a mechanism of the reaction via N‐acylurea from the identification of imide linkage and amid acid group in IEP solutions. NMR and FTIR analyses confirmed that IEPs were segmented polymers composed of imide hard segment and poly(tetramethylene oxide) (PTMO) soft segment. The dynamic mechanical and thermal analyses indicated that the IEPs prepared from 2,6‐TDI and MDI showed a glass‐transition temperature (T_g ) at about −60°C, corresponding to T_g of PTMO segment, and suggested that microphase‐separation between the imide segment and the PTMO segment occured in them. TGA studies indicated the 10% weight‐loss temperatures (T₁₀) under air for IEPs were in the temperature range of 343–374°C. IEPs prepared from 2,6‐TDI and MDI showed excellent tensile properties and good solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 715–723, 2000     

Chemoselective polyesterification by direct polycondensation

A convenient method for the synthesis of polyester‐containing amino substitutes on the aromatic rings of the backbone has been developed. This polyester was prepared by chemoselective polyesterification of isophthalic acid with bisphenol having an amino group in the presence of the condensing agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐benzoxazolyl)phosphonate ( 1 ) and 1,5‐diazabicyclo[4,3,0]‐5‐nonene as a base. The model reactions were carried out in detail to elucidate appropriate conditions of chemoselective polyesterification. Direct polycondensation of isopthalic acid with 4,4′‐[1‐(4‐aminophenyl)ethylidene]bisphenol proceeded smoothly under mild conditions and produced the desired polyester with a number average molecular weight of 11,000 and M_w/M_n of 2.22. The polymer obtained was characterized by IR, ¹H, and ¹³C NMR spectroscopies. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 78–85, 2001