Scaling properties of azimuthal anisotropy in Au+Au and Cu+Cu Collisions at sqrt[s NN]=200 GeV

Differential measurements of elliptic flow (v2) for Au+Au and Cu+Cu collisions at sqrt[sNN]=200 GeV are used to test and validate predictions from perfect fluid hydrodynamics for scaling of v2 with eccentricity, system size, and transverse kinetic energy (KE T). For KE T identical with mT-m up to approximately 1 GeV the scaling is compatible with hydrodynamic expansion of a thermalized fluid. For large values of KE T mesons and baryons scale separately. Quark number scaling reveals a universal scaling of v2 for both mesons and baryons over the full KE T range for Au+Au. For Au+Au and Cu+Cu the scaling is more pronounced in terms of KE T, rather than transverse momentum.     

Qβ measurements of 158, 159Pm , 159, 161Sm , 160-165Eu , 163Gd and 166Tb using a total absorption BGO detector

Q _β values of the neutron-rich isotopes of ^160-165Eu and ¹⁶³Gd were measured for the first time using a total absorption bismuth germanate (BGO) detector, and previously obtained data on ^{158, 159}Pm , ^{159, 161}Sm and ¹⁶⁶Tb were re-analyzed. These radioactive sources were prepared by an on-line mass separator (Tokai-ISOL) following the ²³⁸U (p,f reaction. The deduced Q _β values are the following: 6085(80)keV for ¹⁵⁸Pm , 3805(65)keV for ¹⁵⁹Sm , 5460(140)keV for ¹⁵⁹Pm , 4705(60)keV for ¹⁶⁰Eu , 5065(130)keV for ¹⁶¹Sm , 3705(60)keV for ¹⁶¹Eu , 5575(60)keV for ¹⁶²Eu , 4690(70)keV for ¹⁶³Eu , 3170(70)keV for ¹⁶³Gd , 6430(70)keV for ¹⁶⁴Eu , 5800(120)keV for ¹⁶⁵Eu , and 4695(70)keV for ¹⁶⁶Tb . Moreover, the deduced mass excesses and two-neutron separation energies ( S _2n values) were compared with those of the atomic mass evaluations and theoretical predictions.     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Prospects for the search for a standard model Higgs boson in ATLAS using vector boson fusion

The European Physical Journal C - The potential for the discovery of a Standard Model Higgs boson in the mass range m H < 2 m Z in the vector boson fusion mode has been studied for the ATLAS...     

Observation of large CP violation in the neutral B meson system

We present a measurement of the standard model CP violation parameter sin2 phi(1) based on a 29.1 fb(-1) data sample collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. One neutral B meson is fully reconstructed as a J/psi K(S), psi(2S)K(S), chi(c1)K(S), eta(c)K(S), J/psi K(L), or J/psi K(*0) decay and the flavor of the accompanying B meson is identified from its decay products. From the asymmetry in the distribution of the time intervals between the two B meson decay points, we determine sin2 phi(1) = 0.99+/-0.14(stat)+/-0.06(syst). We conclude that we have observed CP violation in the neutral B meson system.     

Heavy element nuclear chemistry at JAERI

The present status of heavy element nuclear chemistry research at JAERI (Japan Atomic Energy Research Institute) is reviewed. Production of the transactinide nuclei ²⁶¹Rf and ²⁶²Db via the reactions of ²⁴⁸Cm(¹⁸O,5n) and ²⁴⁸Cm(¹⁹F, 5n), respectively, at the JAERI tandem accelerator is reported. Study of the aqueous chemistry of Rf is being carried out with a newly developed rapid ion-exchange separation apparatus. Anion-exchange behavior of Rf in acidic solution is briefly discussed. Recent experimental results on decay studies of neutron-deficient actinide nuclei using the gas-jet coupled JAERI-ISOL are given. We also discuss characteristics of nuclear deformation properties at scission in symmetric and asymmetric fission of actinides. Prospects for studies in the near future are briefly considered.     

Measurement of the hadronic decay current in τ?→π??+vτ

The properties of hadronic Z⁰ decays with final state photons, measured with OPAL at LEP, have been compared with predictions from two different matrix element calculations ofO( _s ). Two calculations, GNJETS and EEPRAD, have been investigated which use different schemes to restrict the phase space around the poles of the cross section. Assuming the E0-JADE jet definition, both calculations describe the data well in large regions of phase space fory _cut values around 0.06. For very large and very small jet-photon masses some deviations from the predictions have been found, indicating the importance of higher order corrections. Significant differences between the calculations are only apparent in the predicted rate of 1-jet plus photon events. The rate is higher in GNJETS which reproduces the data better than EEPRAD.     

Quasi-superradiant soliton state of matter in quantum metamaterials

Strong interaction of a system of quantum emitters (e.g., two-level atoms) with electromagnetic field induces specific correlations in the system accompanied by a drastic increase of emitted radiation (superradiation or superfluorescence). Despite the fact that since its prediction this phenomenon was subject to a vigorous experimental and theoretical research, there remain open question, in particular, concerning the possibility of a first order phase transition to the superradiant state from the vacuum state. In systems of natural and charge-based artificial atom this transition is prohibited by “no-go” theorems. Here we demonstrate numerically and confirm analytically a similar transition in a one-dimensional quantum metamaterial – a chain of artificial atoms (qubits) strongly interacting with classical electromagnetic fields in a transmission line. The system switches from vacuum state to the quasi-superradiant (QS) phase with one or several magnetic solitons and finite average occupation of qubit excited states along the transmission line. A quantum metamaterial in the QS phase circumvents the “no-go” restrictions by considerably decreasing its total energy relative to the vacuum state by exciting nonlinear electromagnetic solitons.     

Novel mechanism of photoinduced reversible phase transitions in molecule-based magnets

A novel microscopic mechanism of bidirectional structural changes is proposed for the photoinduced magnetic phase transition in Co-Fe Prussian blue analogs on the basis of ab initio quantum chemical cluster calculations. It is shown that the local potential energies of various spin states of Co are sensitive to the number of nearest neighbor Fe vacancies. As a result, the forward and backward structural changes are most readily initiated by excitation of different local regions by different photons. This mechanism suggests an effective strategy to realize photoinduced reversible phase transitions in a general system consisting of two local components.     

Superconductivity in bulk T′-(La,Sm)2CuO4 prepared via a molten alkaline hydroxide route

We have synthesized La_2?xSm_xCuO₄ (0 ? x ? 2.0) with the Nd₂CuO₄ structure via a molten alkaline hydroxide route at temperatures as low as 400–480 °C. After reduction heat treatment in vacuum at 600–750 °C for removal of excess oxygen atoms at the interstitial apical site, superconductivity with T_c = 20–24 K was observed in the samples with x = 0.05–1.0. The superconducting volume fraction is nearly 100% for x = 0.3–0.7. Our results demonstrate that La_2?xSm_xCuO₄ with no nominal carrier doping is a bulk superconductor.