Classification Performance of a Low Pressure Differential Mobility Analyzer for Nanometer-sized Particles

Size distribution measurements and classification tests by a low pressure differential mobility analyzer (LPDMA) for nanometer-sized silver particles and cesium iodide particles under low pressure conditions (123–300 Torr) were performed using a transmission electron microscope (TEM) and the tandem DMA technique. When the ratio of the sheath gas flow rate and the aerosol gas flow rate was set at 5 : 1, the targeted sizes calculated from the classification voltage applied to the LPDMA at 160 Torr are found to be in good correlation with the count mean Feret diameter obtained from the TEM observation of the particles collected after a classification ranging from 6 to 25 nm, although the targeted sizes set by the LPDMA were approximately 15% greater than the count mean Feret diameter measured by the TEM after classification. The geometric standard deviations of DMA-classified particles measured by TEM and those obtained from the tandem DMA method ranged from 1.08 to 1.17 and from 1.05 to 1.13, respectively. They were slightly greater than the ideal geometric standard deviations (1.05) of the particles classified with the LPDMA, which was calculated by neglecting the broadening effects due to Brownian diffusion. We experimentally demonstrated the validity of our LPDMA system for size measurements and classification of the nanometer-sized particles under low pressure conditions.     

Iron-57 mössbauer spectroscopic study of six-coordinate and seven-coordinate iron(III)-EDTA complexes

Newly prepared six-coordinate M[Fe(edta)] (M=Li, Na, K, Rb) and seven-coordinate H[Fe(edta)(H₂O)].H₂O were characterized by Mössbauer spectroscopy. The hygroscopic six-coordinate complexes were found to have high-spin Fe³⁺ ions in distorted octahedral sites.     

Fundamental imaging properties of transillumination laser computed tomography based on coherent detection imaging method.

The coherent detection imaging (CDI) method uses the optical heterodyne detection technique. CW and single frequency lasers having long coherence lengths are used to exploit the maximum advantages of heterodyne detection, such as high directionality, selectivity and sensitivity. The CDI method based on optical heterodyne detection enables selective filtering of the directional coherence-retaining emergent photons, which leads to image reconstruction from projections, similar to X-ray computed tomography (CT). So far we have demonstrated the advantages and capabilities of the measurement technique for transillumination optical computed tomography in biomedicine. Here, we investigate the fundamental imaging properties of CDI method, such as its high directionality and quantitativeness, with preliminary physical phantom experiments. The results show that the CDI method satisfies the requirements for CT reconstruction under the first order approximation, and enables quantitative measurements in the sense that the relationship between estimated and actual concentration retains a satisfactory linearity.     

Laccase‐catalyzed polymerization of lignocatechol and affinity on proteins of resulting polymers

For the synthesis of a new biologically functional polymer from a natural resource by an environment‐friendly method, the laccase‐catalyzed polymerization of a lignin‐based macromonomer, lignocatechol, was carried out for the first time in ethanol–phosphate buffer solvent system to give crosslinked polymers in good yields. Lignocatechol was prepared by the phase separation system of lignin and catechol in aqueous sulfuric acid. The copolymerization was also performed with urushiol to afford the corresponding copolymers in high yields. The polymerization mechanism was estimated by the IR and pyrolysis GC‐MS measurements, suggesting that the polymerization proceeded mainly at the catechol ring through a quinone radical intermediate. The thermal properties were measured by the DSC, TG, and TMA analyses, indicating that the polymers had high thermal stabilities because of the crosslinked structures. In addition, it was found that the resulting polymers had the affinity of bovine serum albumin (BSA) and glucoamylase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 824–832, 2009     

Structure of commelinin,a blue complex pigment from the blue flowers of Commelina communis

The X-ray crystal structure of natural commelinin is investigated. The results demonstrate that commelinin is a tetranuclear (4 Mg²⁺) metal complex, in which two Mg²⁺ ions chelate to six anthocyanin molecules, while the other two Mg²⁺ ions bind to six flavone molecules, stabilizing the commelinin complex, a new type of supramolecular complex.     

Development of efficient photocatalytic systems for CO2 reduction using mononuclear and multinuclear metal complexes based on mechanistic studies

Photocatalytic systems for CO₂ reduction using metal complexes, especially rhenium(I) complexes as a main component, are reviewed: mononuclear Re(I) complexes, mixed systems with two different Re(I) complexes, and supramolecule systems with a Re(I) complex connected to a ruthenium(II) complex. We focus on the mechanistic studies and the architecture for constructing the photocatalytic systems based on the mechanism.     

Ion exchange fabric synthesized by graft polymerization and its application to ultra-pure water production

Ion exchange fabric (IEF) having the functional group of sulfonic acid was synthesized by radiation grafting of glycidyl methacrylate on a polyethylene nonwoven fabric and subsequent chemical modification. Total organic carbon eluted from the resulting IEF could be reduced to the concentration less than 1 ppb after washing with organic solvents. Adsorption performance of the obtained IEF was evaluated by 10 ppb Na⁺ solution. The column packed IEF, 7 mm in diameter and 20 mm high, could remove the Na⁺ at the distribution coefficient of 1.2×10⁷ at linear velocity of 400 m/h. At column height of 95 mm, the breakthrough point reached 2.0×10⁵ in bed volume and the degree of column utilization was improved up to 18.7%. From these results, the IEF synthesized by graft polymerization was considered to be applicable for water purification in ultra-pure water production.     

Noise reduction by dynamic signal preemphasis

In this work we propose an approach to reduce the digitization noise for a given dynamic range, i.e., the number of bits, of an analog to digital converter used in an NMR receiver. In this approach, the receiver gain is dynamically increased so that the free induction decay is recorded in such an emphasized way that the decaying signal is digitized using as many number of bits as possible, and at the stage of data processing, the original signal profile is restored by applying the apodization that compensates the effect of the preemphasis. This approach, which we call APodization after Receiver gain InCrement during Ongoing sequence with Time (APRICOT), is performed in a solid-state system containing a pair of (13)C spins, one of which is fully isotopically labeled and the other is naturally abundant. It is demonstrated that the exceedingly smaller peak buried in the digitization noise in the conventional approach can be revealed by employing APRICOT.