Determination of Atrazine,Simazine, Alachlor,and Metolachlor in Surface Water Using Dispersive Pipette Extraction and Gas Chromatography–Mass Spectrometry

Four commonly found pesticides (alachlor, atrazine, metolachlor, and simazine) in surface water were determined using dispersive pipette extraction followed by gas chromatography–mass spectrometry. The rapid mixing and equilibrium between the dispersive pipette extraction adsorbent and water sample resulted in fast and efficient extraction. Using only 5?mL of water sample, the estimated time consumption for extraction of each sample was less than 5?min. Method validation was performed to evaluate accuracy, precision, linearity, the limits of detection, and the limits of quantitation. Average recovery of above 90% was obtained with relative standard deviations below 10%, which indicated good accuracy and precision of the dispersive pipette extraction method. Coefficients of determination were all above 0.9901 and showed good linearity. For the four pesticides studied using the current method, the limits of detection ranged from 7 to 40?ng?L^?1, and limits of quantitation were from 20 to 130?ng?L^?1. Method validation results supported the application of the current method for drinking water safety monitoring per National Primary Drinking Water Regulations established by the US Environmental Protection Agency. Water samples from Lake Lanier and Stone Mountain Lake (Georgia, USS) were analyzed with this method as a preliminary work for a larger scale drinking water quality study in the future. Trace amounts of simazine and atrazine were found in lake water samples, but both were below the regulation levels of the US Environmental Protection Agency.     

Nucleophilic additions to fused bicyclic five-membered ring oxocarbenium ions: evidence for preferential attack on the inside face

Evidence is provided that nucleophilic attack on five-membered ring oxocarbenium ions occurs from the inside face of the envelope. An eight-five fused-bicyclic system in which two substituents are constrained to pseudoequatorial positions underwent nucleophilic addition with selectivity that was comparable to an unconstrained monocyclic system. On the other hand, a bicyclic six-five analogue underwent reaction with low selectivity. This observation indicates that minimization of eclipsing interactions by attacking inside the envelope is not enough to control selectivity, but that the changes in the overall three-dimensional structure of the ring must be favorable as well. In the bicyclic six-five series, the six-membered ring is accommodated in the cation, but it destabilizes the transition state structure leading to the first-formed product of inside attack.     

Infrared spectra of aluminum hydrides in solid hydrogen: Al2H4 and Al2H6

The reaction of laser-ablated Al atoms and normal-H(2) during co-deposition at 3.5 K produces AlH, AlH(2), and AlH(3) based on infrared spectra and the results of isotopic substitution (D(2), H(2) + D(2) mixtures, HD). Four new bands are assigned to Al(2)H(4) from annealing, photochemistry, and agreement with frequencies calculated using density functional theory. Ultraviolet photolysis markedly increases the yield of AlH(3) and seven new absorptions for Al(2)H(6) in the infrared spectrum of the solid hydrogen sample. These frequencies include terminal Al-H(2) and bridge Al-H-Al stretching and AlH(2) bending modes, which are accurately predicted by quantum chemical calculations for dibridged Al(2)H(6), a molecule isostructural with diborane. Annealing these samples to remove the H(2) matrix decreases the sharp AlH(3) and Al(2)H(6) absorptions and forms broad 1720 +/- 20 and 720 +/- 20 cm(-1) bands, which are due to solid (AlH(3))(n). Complementary experiments with thermal Al atoms and para-H(2) at 2.4 K give similar spectra and most product frequencies within 2 cm(-1). Although many volatile binary boron hydride compounds are known, binary aluminum hydride chemistry is limited to the polymeric (AlH(3))( solid. Our experimental characterization of the dibridged Al(2)H(6) molecule provides an important link between the chemistries of boron and aluminum.     

Electrophilic acetylation and bromination reactions of benzo[b]naphtho[2,3-e][1,4]dioxin

The reactivity of benzo[b]naphtho[2,3-e][1,4]dioxin in the electrophilic aromatic substitution reactions has been studied. Friedel-Crafts acetylation resulted in the formation of three out of the possible five monoacetylated products, with the acetyl group located in positions 8 (major), 7 and 6 (minor) of the heterocycle. In the bromination reaction a higher selectivity was observed with the 6-bromo derivative found as the only monobrominated product and the 6,11-dibromo derivative found as the only polybrominated product. A ratio of unreacted heterocycle:6-bromo:6,11-dibromo derivatives in the bromination reaction has been found to depend strongly on the reaction conditions and on the heterocycle:bromine ratio.     

Amine-directed intramolecular hydroacylation of alkenes and alkynes

Medium-ring heterocycles are prepared via an amine-directed, rhodium(I)-catalyzed intramolecular hydroacylation. The presence of an allyl substituent on the amine accelerates the reaction and increases product yields.     

Efficient protocol for quantum Monte Carlo calculations of hydrogen abstraction barriers: Application to methanol

Accurate calculation of hydrogen abstraction reaction barriers is a challenging problem, often requiring high level quantum chemistry methods that scale poorly with system size. Quantum Monte Carlo (QMC) methods provide an alternative approach that exhibit much better scaling, but these methods are still computationally expensive. We describe approaches that can significantly reduce the cost of QMC calculations of barrier heights, using the hydrogen abstraction of methanol by a hydrogen atom as an illustrative example. By analysing the combined influence of trial wavefunctions and pseudopotential quadrature settings on the barrier heights, variance, and time‐step errors, we devise a simple protocol that minimizes the cost of the QMC calculations while retaining accuracy comparable to large‐basis coupled cluster theory. We demonstrate that this protocol is transferable to other hydrogen abstraction reactions.     

Directed evolution experiments reveal mutations at cycloartenol synthase residue His477 that dramatically alter catalysis

[reaction: see text] Cycloartenol synthase cyclizes and rearranges oxidosqualene to the protosteryl cation and then specifically deprotonates from C-19. To identify mutants that deprotonate differently, randomly generated mutant cycloartenol synthases were selected in a yeast lanosterol synthase mutant. A novel His477Asn mutant was uncovered that produces 88% lanosterol and 12% parkeol. The His477Gln mutant produces 73% parkeol, 22% lanosterol, and 5% Delta(7)-lanosterol. These are the most accurate lanosterol synthase and parkeol synthase that have been generated by mutagenesis.     

Enzymatic synthesis of medium chain monoglycerides in a solvent-free system

The synthesis of monocaprin, monolaurin, and monomyristin in a solvent-free system was conducted by mixing a commercial immobilized lipase with the organic reactants (glycerol and fatty acids) in a 20-mL batch reactor with constant stirring. The effects of temperature, fatty acid/glycerol molar ratio, and enzyme concentration on the reaction conversion were determined. The addition of molecular sieves in the assays of monomyristin synthesis was also evaluated. The reactions were carried out for 5 to 6 h and the nonpolar phase was analyzed by gas chromatography. The best results in terms of selectivity and conversion (defined as the percentage of fatty acid consumed) were achieved when the stoichiometric amount of reagents (molar ratio=1) and 9% (w/w) commercial enzyme were used and the reaction was performed at 60°C. The addition of molecular sieves did not improve the synthesis of monomyristin. Conversions as high as 80%, with monoglycerides being the major products, were attained. After 5 h of reaction, the concentration of monoglyceride was about twice that of diglyceride, and only trace amounts of triglyceride were found. The results illustrate the technical possibility of producing medium chain monoglycerides in a solvent-free medium using a simple batch reactor.     

A comparison of measured room acoustics metrics using a spherical microphone array and conventional methods

The traditional microphone configuration used to measure room impulse responses (IRs) according to ISO 3382:2009 is an omnidirectional and figure-8 microphone pair. IRs measurements were taken in a 2500-seat auditorium to determine how the results from a spherical microphone array (an mh acoustics Eigenmike-em32) compare to those from the traditional microphone setup (a Brüel & Kjær Type-4192 omnidirectional microphone and a Sennheiser MKH30 figure-8 microphone). Measurements were obtained at six receiver locations, with three repetitions each in order to first evaluate repeatability. The metrics considered in this study were: reverberation time (T30), early decay time (EDT), clarity index (C80), strength (G), lateral energy fraction (J_LF) and late lateral energy level (L_J). Before calculating these quantities, the IRs were filtered to equalize the frequency response of the microphones and sound source. For the spherical array measurements, the omnidirectional (monopole) and figure-8 (dipole) patterns were extracted using beamforming. In terms of repeatability, the average standard deviation of the three measurements at each receiver location averaged across all metrics, receivers, and octave bands was found to be 0.01 just noticeable differences (JNDs). The analysis comparing the measurements from the two microphone configurations yielded differences which were less than 1 JND for the majority of metrics, with a few exceptions of EDT and C80 slightly above 1 JND. Based on this case study, these results indicate that spherical microphone arrays can be used to obtain valid room IR measurements, which will allow for the development of new metrics utilizing the higher spatial resolution made possible with spherical arrays.