Models for biological trinuclear copper clusters. Characterization and enantioselective catalytic oxidation of catechols by the copper(II) complexes of a chiral ligand derived from (S)-(-)-1,1'-binaphthyl-2,2'-diamine

The dinuclear and trinuclear Cu(II) complexes of an octadentate ligand derived from (S)-1,1'-binaphthyl-2,2'-diamine have been prepared and characterized by UV/Vis, CD, EPR and NMR spectroscopy. The ligand contains two tridentate aminobis(benzimidazole) donor arms connected to a central bidentate diaminobinaphthyl linker, which hosts the chiral unit. In the dinuclear Cu complex the ligation occurs essentially within the tridentate arms of the ligand. The two Cu centers are EPR nonequivalent and noninteracting. The EPR data suggests that one of the Cu ions additionally interacts with one of the tertiary aminonaphthyl donors. In the trinuclear complex the two aminonaphthyl donors bind the third Cu ion. The EPR spectrum of this complex shows the signal for a mononuclear Cu(II) center bound to a tridentate arm, while the remaining two Cu(II) centers are coupled through hydroxo groups. The CD spectrum shows that in the free ligand a severe reduction of the dihedral angle between the naphthyl groups from the strain free range occurs. This conformation is stabilized by ring stacking interactions with the benzimidazole groups. On complex formation this interaction is removed because the benzimidazole groups are involved in metal binding. In the dinuclear Cu complex the conformation of the binaphthyl chromophore probably approaches the strain free range, while in the trinuclear Cu complex a marked flattening of the dihedral angle between the two naphthyl rings occurs. Both complexes are active catalysts in the oxidation of L-/D-Dopa derivatives to quinones. High enantioselectivity is observed in the oxidation of L-/D-Dopa methyl ester catalyzed by the dinuclear Cu complex, which exhibits strong preference for the d enantiomer. The enantioselectivity is largely lost for the trinuclear Cu complex.     

Gas chromatographic/mass spectrometric determination of 3-methoxy-1,2-propanediol and cyclic diglycerols, by-products of technical glycerol, in wine: interlaboratory study

The aim of the present study was to provide the official wine control authorities with an internationally validated method for the determination of 3-methoxy-1,2-propanediol (3-MPD) and cyclic diglycerols (CycDs)-both of which are recognized as impurities of technical glycerol-in different types of wine. Because glycerol gives a sweet flavor to wine and contributes to its full-body taste, an economic incentive is to add glycerol to a wine to mask its poor quality. Furthermore, it is known that glycerol, depending on whether it is produced from triglycerides or petrochemicals, may contain considerable amounts of 3-MPD in the first case or CycDs in the second. However, because these compounds are not natural wine components, it is possible to detect glycerol added to wine illegally by determining the above-mentioned by-products. To this end, one of the published methods was adopted, modified, and tested in a collaborative study. The method is based on gas chromatographic/mass spectrometric analysis of diethyl ether extracts after salting out with potassium carbonate. The interlaboratory study for the determination of 3-MPD and CycDs in wine was performed in 11 laboratories in 4 countries. Wine samples were prepared and sent to participants as 5 blind duplicate test materials and 1 single test material. The concentrations covered ranges of 0.1-0.8 mg/L for 3-MPD and 0.5-1.5 mg/L for CycDs. The precision of the method was within the range predicted by the Horwitz equation. HORRAT values obtained for 3-MPD ranged from 0.8 to 1.7, and those obtained for CycDs ranged from 0.9 to 1.3. Average recoveries were 104 and 109%, respectively.     

Quantum mechanical embedding theory based on a unique embedding potential

We remove the nonuniqueness of the embedding potential that exists in most previous quantum mechanical embedding schemes by letting the environment and embedded region share a common embedding (interaction) potential. To efficiently solve for the embedding potential, an optimized effective potential method is derived. This embedding potential, which eschews use of approximate kinetic energy density functionals, is then used to describe the environment while a correlated wavefunction (CW) treatment of the embedded region is employed. We first demonstrate the accuracy of this new embedded CW (ECW) method by calculating the van der Waals binding energy curve between a hydrogen molecule and a hydrogen chain. We then examine the prototypical adsorption of CO on a metal surface, here the Cu(111) surface. In addition to obtaining proper site ordering (top site most stable) and binding energies within this theory, the ECW exhibits dramatic changes in the p-character of the CO 4σ and 5σ orbitals upon adsorption that agree very well with x-ray emission spectra, providing further validation of the theory. Finally, we generalize our embedding theory to spin-polarized quantum systems and discuss the connection between our theory and partition density functional theory.     

Properties and structure of interfacial layers formed by hydrophilic silica dispersions and palmitic acid

The properties and structure of different types of interfacial layers obtained from aqueous dispersions of nanometric silica and palmitic acid (PA) have been studied and characterized by different diagnostics and measurements. The investigations concern PA monolayers spread on the silica dispersions, dispersions in contact with PA solutions in oil and silica dispersions containing PA, aiming at elucidating the role of the PA interaction with the particles and investigating the surface-activity of the originated silica-PA complexes. Drop shape tensiometry was utilized to measure the dynamic surface and interfacial tension while a Langmuir trough apparatus was used to obtain compression isotherms of the spread PA layers and to measure the dilational viscoelasticity according to the oscillating barrier method. Brewster angle microscopy and ellipsometry were utilized to investigate the lateral and vertical structure of the interfacial layers. From this multifold approach emerges a complex picture of the features of these interfacial layers that can be rationalized on the basis of the adsorption of PA on the particle surface. The results evidence a threshold in PA adsorption above which particles change from hydrophilic to partially hydrophobic, promoting their incorporation into the interfacial layer.     

GC-MS analysis of aroma of Medemia argun (mama-n-khanen or mama-n-xanin), an ancient Egyptian fruit palm

The fruits of the edible and medicinal Egyptian palm, Medemia argun, were collected from Aswan in Egypt and the essential oil (EO) from fruits and headspace (HS) of the seeds and fleshy mesocarps were analyzed by GC and GC-MS. Results obtained by GC-MS analysis indicated a high variability in the oil and in the headspace from seeds and mesocarps. Sesquiterpene derivatives were the main group of volatiles in the EO from fruits and in the HS from seeds (45.0 and 64.0%, respectively), while oxygenated hydrocarbon derivatives were the main constituents in the HS obtained from fleshy mesocarps (96.5%). The different chemical composition of the headspace obtained from the seeds and mesocarps of M. argun can be correlated with the different roles that the different constituents play in the prevention of dehydration of the fruits in the desert region from where the plant was collected.     

Interface induced crystal structures of dioctyl-terthiophene thin films

Temperature dependent structural and morphological investigations on semiconducting dioctyl-terthiophene (DOTT) thin films prepared on silica surfaces reveals the coexistence of surface induce order and distinct crystalline/liquid crystalline bulk polymorphs. X-ray diffraction and scanning force microscopy measurements indicate that at room temperature two polymorphs are present: the surface induced phase grows directly on the silica interface and the bulk phase on top. At elevated temperatures the long-range order gradually decreases, and the crystal G (340 K), smectic F (348 K), and smectic C (360 K) phases are observed. Indexation of diffraction peaks reveals that an up-right standing conformation of DOTT molecules is present within all phases. A temperature stable interfacial layer close to the silica-DOTT interface acts as template for the formation of the different phases. Rapid cooling of the DOTT sample from the smectic C phase to room temperature results in freezing into a metastable crystalline state with an intermediated unit cell between the room temperature crystalline phase and the smectic C phase. The understanding of such interfacial induced phases in thin semiconducting liquid crystal films allows tuning of crystallographic and therefore physical properties within organic thin films.     

In Situ Synchrotron X-ray Diffraction Studies of Hydrogen-Desorption Properties of 2LiBH4–Mg2FeH6 Composite

Adding a secondary complex metal hydride can either kinetically or thermodynamically facilitate dehydrogenation reactions. Adding Mg₂FeH₆ to LiBH₄ is energetically favoured, since FeB and MgB₂ are formed as stable intermediate compounds during dehydrogenation reactions. Such “hydride destabilisation” enhances H₂-release thermodynamics from H₂-storage materials. Samples of the LiBH₄ and Mg₂FeH₆ with a 2:1 molar ratio were mixed and decomposed under three different conditions (dynamic decomposition under vacuum, dynamic decomposition under a hydrogen atmosphere, and isothermal decomposition). In situ synchrotron X-ray diffraction results revealed the influence of decomposition conditions on the selected reaction path. Dynamic decomposition of Mg₂FeH₆–LiBH₄ under vacuum, or isothermal decomposition at low temperatures, was found to induce pure decomposition of LiBH₄, whilst mixed decomposition of LiBH₄ + Mg and formation of MgB₂ were achieved via high-temperature isothermal dehydrogenation.     

Enhancement of Antibiotic Activity by 1,8-Naphthyridine Derivatives against Multi-Resistant Bacterial Strains

The search for new antibacterial agents has become urgent due to the exponential growth of bacterial resistance to antibiotics. Nitrogen-containing heterocycles such as 1,8-naphthyridine derivatives have been shown to have excellent antimicrobial properties. Therefore, the purpose of this study was to evaluate the antibacterial and antibiotic-modulating activities of 1,8-naphthyridine derivatives against multi-resistant bacterial strains. The broth microdilution method was used to determine the minimum inhibitory concentration (MIC) of the following compounds: 7-acetamido-1,8-naphthyridin-4(1H)-one and 3-trifluoromethyl-N-(5-chloro-1,8-naphthyridin-2-yl)-benzenesulfonamide. The antibiotic-modulating activity was analyzed using subinhibitory concentrations (MIC/8) of these compounds in combination with norfloxacin, ofloxacin, and lomefloxacin. Multi-resistant strains of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus were used in both tests. Although the compounds had no direct antibacterial activity (MIC ≥ 1.024 µg/mL), they could decrease the MIC of these fluoroquinolones, indicating synergism was obtained from the association of the compounds. These results suggest the existence of a structure–activity relationship in this group of compounds with regard to the modulation of antibiotic activity. Therefore, we conclude that 1,8-naphthyridine derivatives potentiate the activity of fluoroquinolone antibiotics against multi-resistant bacterial strains, and thereby interesting candidates for the development of drugs against bacterial infections caused by multidrug resistant strains.