Acoustic emission localization in complex dissipative anisotropic structures using a one-channel reciprocal time reversal method

This paper presents an imaging method for the localization of the impact point in complex anisotropic structures with diffuse field conditions, using only one passive transducer. The proposed technique is based on the reciprocal time reversal approach (inverse filtering) applied to a number of waveforms stored into a database containing the experimental Green's function of the structure. Unlike most acoustic emission monitoring systems, the present method exploits the benefits of multiple scattering, mode conversion, and boundaries reflections to achieve the focusing of the source with high resolution. Compared to a standard time reversal approach, the optimal refocusing of the back propagated wave field at the impact point is accomplished through a "virtual" imaging process. The robustness of the inverse filtering technique is experimentally demonstrated on a dissipative stiffened composite panel and the source position can be retrieved with a high level of accuracy in any position of the structure. Its very simple configuration and minimal processing requirements make this method a valid alternative to the conventional imaging Structural Health Monitoring systems for the acoustic emission source localization.     

Abatement of thermal noise due to internal damping in 2D oscillators with rapidly rotating test masses

Mechanical oscillators can be sensitive to very small forces. Low frequency effects are up-converted to higher frequency by rotating the oscillator. We show that for 2-dimensional oscillators rotating at frequency much higher than the signal the thermal noise force due to internal losses and competing with it is abated as the square root of the rotation frequency. We also show that rotation at frequency much higher than the natural one is possible if the oscillator has 2 degrees of freedom, and describe how this property applies also to torsion balances. In addition, in the 2D oscillator the signal is up-converted above resonance without being attenuated as in the 1D case, thus relaxing requirements on the read out. This work indicates that proof masses weakly coupled in 2D and rapidly rotating can play a major role in very small force physics experiments.     

A LES-CMC formulation for premixed flames including differential diffusion

A finite volume large eddy simulation–conditional moment closure (LES-CMC) numerical framework for premixed combustion developed in a previous studyhas been extended to account for differential diffusion. The non-unity Lewis number CMC transport equation has an additional convective term in sample space proportional to the conditional diffusion of the progress variable, that in turn accounts for diffusion normal to the flame front and curvature-induced effects. Planar laminar simulations are first performed using a spatially homogeneous non-unity Lewis number CMC formulation and validated against physical-space fully resolved reference solutions. The same CMC formulation is subsequently used to numerically investigate the effects of curvature for laminar flames having different effective Lewis numbers: a lean methane–air flame with Le_eff = 0.99 and a lean hydrogen–air flame with Le_eff = 0.33. Results suggest that curvature does not affect the conditional heat release if the effective Lewis number tends to unity, so that curvature-induced transport may be neglected. Finally, the effect of turbulence on the flame structure is qualitatively analysed using LES-CMC simulations with and without differential diffusion for a turbulent premixed bluff body methane–air flame exhibiting local extinction behaviour. Overall, both the unity and the non-unity computations predict the characteristic M-shaped flame observed experimentally, although some minor differences are identified. The findings suggest that for the high Karlovitz number (from 1 to 10) flame considered, turbulent mixing within the flame weakens the differential transport contribution by reducing the conditional scalar dissipation rate and accordingly the conditional diffusion of the progress variable.     

Characterization of bronze Roman coins of the fifth century called <Emphasis Type=Italic>nummi</Emphasis> through different analytical techniques

Mixing of different organic charge-transfer-complexes (CT-complexes) might allow the adjustment of the optical and morphological properties of the resulting material system. In this work, a study of two CT-complexes, mixed by thermal coevaporation at different concentrations by substituting only the acceptor molecules, is presented. Electron diffraction patterns, which were collected on samples of the ternary system of the prototypical CT-complexes DBTTF-TCNQ and DBTTF-F₄TCNQ do not show any indication of a mixed crystalline phase or novel crystalline order. X-ray diffraction measurements additionally confirm the phase separation in the ternary system. However, upon mixing of the complexes, the degree of crystallinity of the individual phases is reduced. This effect correlates with the mixing ratio of the CT-complexes in the ternary compound. Furthermore, we do not observe a shift or the appearance of new peaks in the infrared spectra of (DBTTF-TCNQ) _x :(DBTTF-F₄TCNQ)_1?x . Hence, there is no indication for a pronounced or novel chemical interaction between the individual CT-complexes in the mixed compound.     

New far-infrared emissions and frequency measurements in hydrazine

By means of a new CO₂ laser we performed a new investigation of the far-infrared laser emission spectrum of hydrazine excited by the 10P(32) and 10R(8) CO₂ laser lines. We found seven new lines and measured the frequency of four of them; moreover we measured the frequencies of two more lines previously reported in the literature with only wavelength measurements. The frequencies of the far-infrared laser emissions have been measured by means of a frequency-synthesis chain based on new InP Schottky diodes. The detected signal was beat-note generated in a Schottky diode between the far-infrared radiation, the harmonics of a 72 GHz frequency reference and a rf signal. We also characterized all of the observed lines by their polarization relative to the pumping CO₂ laser, the optimum pressure and the offset relative to the CO₂ center frequency. PACS 42.55.Lt; 42.62.Fi     

Cladding mode reorganization in high-refractive-index-coated long-period gratings: effects on the refractive-index sensitivity

We theoretically and experimentally investigated the reorganization of cladding modes in high-refractive-index- (HRI-) coated long-period gratings (LPGs), focusing on the influence of refractive-index sensitivity. When azimuthally symmetric nanoscale HRI coatings are deposited along LPG devices, a significant modification of the distribution of cladding modes occurs, depending on the layers' features (refractive index and thickness) and on the external refractive index. In particular, if these parameters are properly chosen, a transition between cladding modes and overlay modes occurs. Numerical and experimental effects of the mode transition on the sensitivity of the surrounding refractive index are described.     

Freezing of a Lennard-Jones fluid: from nucleation to spinodal regime

Using molecular dynamics, we investigate the crystal nucleation in a Lennard-Jones fluid as a function of the degree of supercooling. At moderate supercooling, a nucleation picture applies, while for deeper quenches, the phenomenon progressively acquires a spinodal character. We show that in the nucleation regime, the freezing is a two-step process. The formation of the critical nucleus is indeed preceded by the abrupt formation of a precritical crystallite from a density fluctuation in the fluid. In contrast, as the degree of supercooling is increased, crystallization proceeds in a more continuous and collective fashion and becomes more spatially diffuse, indicating that the liquid is unstable and crystallizes by a spinodal mechanism.     

Phase shifting photoelasticity in white light

The availability of image acquisition systems has led to the development of digital photoelasticity both in monochromatic and white light. In particular white light has been used mainly with the following methods: Spectral Content Analysis, RGB photoelasticity and phase shifting photoelasticity. Phase shifting photoelasticity in the colour domain has been used effectively for the determination of the isoclinic parameter in order to reduce the influence of the isochromatic fringes. The method has been also proposed for the determination of the isochromatic fringe order. This paper concerns the general characteristics of phase shifting photoelasticity in the colour domain. Special attention is drawn towards the influence of spectral content of the light source, the spectral response of the colour camera filters, the dispersion of the birefringence and the error of quarter wave plates.     

Holographic watermarking for authentication of cut images

A watermarking technique, with a Computer Generated Hologram (CGH) coding system of the mark, is introduced and tested. The CGH watermarking can be used to authenticate parts of the original image. The hologram of the mark is embedded in the spatial domain by a blind additive embedding technique. The use of holography allows authenticating cuts of the original image, is the major novelty of this paper. The proposed methodology is characterized as an authentication technique, since it does not rely on the original image to decide whether the watermarked image has been altered or not and at the same time it is able to detect and localize any possible malicious change. Asymmetric cryptography is used to hide the hash information in an unambiguous way (non-repudiation property).