V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

The chemistry of thujone. IX. Thujone as a chiral synthon for the synthesis of optically active steroid analogues. The vinylpicoline route

The thujone-derived enone 1 , upon base-catalyzed reaction with 2-methyl-6-vinylpyridine is converted to the pyridine analogue 5 (Scheme 1). Catalytic reduction of the latter to 6 generates two new centers of chirality which eventually become C(8) and C(14) in the ultimate synthetic steroid analogue 12 . An X-ray analysis of 6 establishes the structure and absolute configuration so as to determine its suitability in subsequent synthetic studies. The acetal derivative 7 , via Birch reduction, hydrolysis, and internal aldol cyclization, is converted into the cyclohexenone analogue 10 (Scheme 2). This ‘one-pot’ process affords an efficient conversion of the pyridine ring into a cyclohexenone system required for A-ring construction of the steroid skeleton. Finally, conversion of 10 , via the unsaturated diketone 11 , provides the chiral steroid analogue 12 .     

Synthesis, Characterization, and Electrochemistry of sigma-Bonded Cobalt Corroles in High Oxidation States

The synthesis, electrochemistry, spectroscopy, and structural characterization of two high-valent phenyl sigma-bonded cobalt corroles containing a central cobalt ion in formal +IV and +V oxidation states is presented. The characterized compounds are represented as phenyl sigma-bonded cobalt corroles, (OEC)Co(C(6)H(5)) and [(OEC)Co(C(6)H(5))]ClO(4), where OEC is the trianion of 2,3,7,8,12,13,17,18-octaethylcorrole. The electronic distribution in both molecules is discussed in terms of their NMR and EPR spectroscopic data, magnetic susceptibility, and electrochemistry.     

Two-stage Off-Gel isoelectric focusing: protein followed by peptide fractionation and application to proteome analysis of human plasma

This paper presents the recently introduced Off-Gel electrophoresis (OGE) technology as a versatile tool to reproducibly fractionate intact proteins and peptides into discrete liquid fractions. The coupling of two stages of OGE, i.e., the separation of intact proteins in a first-stage followed by fractionation of peptides derived from each protein fraction after proteolysis in a second stage, results in an array of 15 x 15 fractions that are directly amenable to additional peptide fractionation like reverse-phase liquid chromatography (RPC). The analysis of all second-stage peptide fractions from only the first-stage protein fraction representing pH 5.0 -5.15 by on-line reverse-phase LC-tandem mass spectrometry resulted in the identification of 53 proteins (337 peptides), of which 10 were on different immunoglobulin (Ig) chains, with an input of only 1.5 mg human blood plasma proteins. Increasing the protein load to approximately 12 mg increased the number of identified proteins in the same protein fraction to 73 proteins (449 peptides), of which 15 were Ig-related. Immunodepletion of six of the most abundant proteins (albumin, transferrin, haptoglobin, IgG, IgA, and alpha-1-antitrypsin) prior to first-stage OGE with an input of 1.5 mg of protein (equivalent to approximately 10 mg nondepleted plasma) resulted in the identification of 81 proteins (660 peptides), of which three were still Ig fragments. The pI-based separation of peptides appears to be nonuniform based on the theoretically determined pI values of identified peptides. This observation specifically accounts for the neutral zone (pI 5-8) and can be accounted for by the physicochemical properties of the peptides given by their amino acid composition. The power of OGE separation of proteins and peptides is discussed with a focus on the use of the knowledge about the pI of proteins and peptides that assist the validation of correct identifications together with the retention time of peptides on RPC.     

Computational strategies for evaluating barrier heights for gas-phase reactions of lithium enolates

Gas-phase activation energies were calculated for three lithium enolate reactions by using several different ab initio and density functional theory (DFT) methods to determine which levels of theory generate acceptable results. The reactions included an aldol-type addition of an enolate to an aldehyde, a proton transfer from an alcohol to a lithium enolate, and an S(N)2 reaction of an enolate with chloromethane. For each reaction, the calculations were performed for both the monomeric and dimeric forms of the lithium enolate. It was found that transition state geometry optimization with B3LYP followed by single point MP2 calculations generally provided acceptable results compared to higher level ab initio methods.     

Coupling of narrow-bore liquid chromatography to thin-layer chromatography : Part I. Interfacing

The coupling of liquid chromatography (l.c.) on narrow-bore columns to thin-layer chromatography (t.l.c.) is described. The effluent from a l.c. column can be deposited on a t.l.c. plate after a normal-phase or reversed-phase separation without serious loss of chromatographic information. Both silica and alkyl-modified silica plates can be used for storage. The interface is a fused silica capillary which connects the column outlet to the spray jet assembly of a Linomat applicator for t.l.c. The stored chromatogram can serve as starting point for a new separation, but also allows the use of detection principles which are normally not compatible with l.c. The chromatography of some polynuclear aromatic hydrocarbons is used to illustrate the possibilities of the combinations.     

A novel synthesis of vinyl esters from vinylversatate-10

Vinylversatate-10 (VV10)¹ has successfully been used to synthesise a large number of lower vinyl esters by transvinylation in presence of mercuric acetate and sulfuric acid. The synthesis of vinylhalo esters proceeds with more difficulty. It has been observed that neither Hg(OAc)₂ nor H₂SO₄ alone is capable of initiating the transvinylation. Furthermore, it has been found that a molar ratio 2:1 of VV10 to carboxylic acid is sufficient to drive the reaction to the right by continuous distillation of the vinyl ester formed, and as a result a high yield of vinyl ester is obtained. A mechanism for this reaction and for the formation of side products has been proposed.     

Preparation of conducting electrodes from biological samples for multi-element trace analysis by spark-source mass spectrometry or emission spectrometry

Four decomposition procedures frequently used for biological material (dry ashing, open wet digestion, wet digestion in a teflon bomb and low-temperature ashing) are optimized for the conversion of biological samples to conducting electrodes suitable for multi-element trace determinations by spark-source mass spectrometry or emission spectrometry. The optimized procedures are evaluated with respect to contamination, retention and preconcentration of the trace elements, homogeneity of the electrodes and precision of the final results. Both dry-ashing methods are prone to losses by volatilization; simple dry ashing suffers from contamination problems during electrode preparation. Wet digestion gives better precision; digestion with nitric/sulfuric acids in an open flask is the method of choice for most elements being simpler and giving lower blanks than the bomb method.     

Substitutional carbon defects in silicon: A quantum mechanical characterization through the infrared and Raman spectra

The infrared (IR) and Raman spectra of eight substitutional carbon defects in silicon are computed at the quantum mechanical level by using a periodic supercell approach based on hybrid functionals, an all electron Gaussian type basis set and the CRYSTAL code. The single substitutional C _s case and its combination with a vacancy (C _sV and C _sSiV) are considered first. The progressive saturation of the four bonds of a Si atom with C is then examined. The last set of defects consists of a chain of adjacent carbon atoms C, with i = 1–3. The simple substitutional case, C _s, is the common first member of the three sets. All these defects show important, very characteristic features in their IR spectrum. One or two C related peaks dominate the spectra: at 596 cm⁻¹ for C _s (and C _sSiV, the second neighbor vacancy is not shifting the C _s peak), at 705 and 716 cm⁻¹ for C _sV, at 537 cm⁻¹ for C and C (with additional peaks at 522, 655 and 689 for the latter only), at 607 and 624 cm⁻¹, 601 and 643 cm⁻¹, and 629 cm⁻¹ for SiC, SiC, and SiC, respectively. Comparison with experiment allows to attribute many observed peaks to one of the C substitutional defects. Observed peaks above 720 cm⁻¹ must be attributed to interstitial C or more complicated defects.     

4-Amino-1-oxyl-2,2,6,6-tetramethylpiperidine-3-carboxylic acid (β-TOAC), the first spin-labelled, cyclic, chiral β-amino acid resolved in an enantiomerically pure state

Amination of 3-carboxymethyl-1-oxyl-2,2,6,6-tetramethyl-4-piperidone with (R)-α-methylbenzylamine, NaBH₃CN reduction of the resulting enamine and removal of the chiral auxiliary from the separated diastereoisomers, led to enantiomerically pure (3S,4S) and (3R,4R) methyl 4-amino-1-oxyl-2,2,6,6-tetramethylpiperidine-3-carboxylates.