Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

International Measurement Evaluation Programme: IMEP-9, trace elements in water

The International Measurement Evaluation Programme (IMEP) is an interlaboratory comparison scheme, founded, owned and coordinated by the Institute for Reference Materials and Measurements (IRMM) since 1988. IMEP-9 is the third round of trace elements in water evaluation following IMEP-3 and IMEP-6. Reference values for 15 elements stating total concentrations and combined uncertainties (according to GUM) were established. The reference values were established mainly by isotope dilution mass spectrometry (IDMS) as a primary method of measurement, and values traceable to the SI were obtained. The four elements that could not be certified by IDMS were assigned values by means of other measurement techniques. Results from 201 laboratories from 35 countries and four continents were evaluated against the reference values and the comparability between the laboratories is presented graphically.     

Influence of the coordination number of nitrogen on the structure of 6aλ4-thia-1,3,4,6-tetraazapentalenic systems. Crystal structure analyses of 3-(2-pyridylimino)-3H-[1,2,4]thiadiazolo[4,3-a]pyridine and its 1-methylated salt

Structural data were obtained by X-ray crystallography for the title compounds which show that they are essentially planar and exhibit an approximately linear N2-S1-N8 arrangement. In compound 3 the separation between the sulfur atom and the pyridine nitrogen atom (2.61 Å) is larger than the Huggins constant energy distance (2.58 Å), suggesting that there is little or no bonding between them. The methylated salt 4 , on the contrary, has a closer S…N(pyridine) distance (2.19 Å) with an estimated bond dissociation energy of 6 kcal/mole.     

SCF,MP2, and CEPA-1 calculations on the OH ‥ O hydrogen bonded complexes (H2O)2 and (H2O-H2CO)

Counterpoise corrected ab initio calculations are reported for (H₂O)₂ and H₂O-H₂CO. Geometry searches were done in the moment-optimized basis DZP' at the SCF, MP2, and CEPA-1 levels of theory, followed by more accurate single-point calculations in basis ESPB, which includes bondfunctions to saturate the dispersion energy. The final equilibrium binding energies obtained are ?4.7 ±0.3 kcal/mol for a near-linear (H₂O)₂ structure and ?4.6 ±0.3 kcal/mol for a strongly bent HOH ‥ OCH₂ structure. The energy difference between these systems is much smaller than in all previous ab initio work. Cyclic (C_2h) and bifurcated (C_2v) transition structures for (H₂O)₂ are located at 1.0 ±0.1 kcal/mol and 1.9 ±0.3 kcal/mol above the global minimum, respectively. A new partitioning scheme is presented that rigorously partitions the MP2 correlation interaction energy in intra and intermolecular (dispersion) contributions. These terms are large (up to 2 kcal/mol) but of opposite sign for most geometries studied and hence their overall effect upon the final structures is relatively small. The relative merits of the MP2 and CEPA-1 approaches are discussed are discussed and it is concluded that for economical reasons MP2 is to be preferred, especially for larger systems.     

Methode d'analyse quantitative par spectrometrie Raman-laser associee aux fibres optiques pour le suivi d'une fermentation alcooliqueA quantitative laser Raman spectrometric method with fibre optics for monitoring an alcoholic fermentation

Laser Raman spectrometry with a fibre-optic system is used to monitor the concentrations of ethanol, glucose and fructose at various stages of an alcoholic fermentation process. For evaluation of the data, cross-correlation and multivariate least-squares procedures are compared; the latter gives the best results. Ethanol, glucose and fructose can be determined remotely with a precision of ca. 10 g l^?1 (10–15%).     

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004     

Selective, controllable, and reversible aggregation of polystyrene latex microspheres via DNA hybridization

The directed three-dimensional self-assembly of microstructures and nanostructures through the selective hybridization of DNA is the focus of great interest toward the fabrication of new materials. Single-stranded DNA is covalently attached to polystyrene latex microspheres. Single-stranded DNA can function as a sequence-selective Velcro by only bonding to another strand of DNA that has a complementary sequence. The attachment of the DNA increases the charge stabilization of the microspheres and allows controllable aggregation of microspheres by hybridization of complementary DNA sequences. In a mixture of microspheres derivatized with different sequences of DNA, microspheres with complementary DNA form aggregates, while microspheres with noncomplementary sequences remain suspended. The process is reversible by heating, with a characteristic "aggregate dissociation temperature" that is predictably dependent on salt concentration, and the evolution of aggregate dissociation with temperature is observed with optical microscopy.     

Monte Carlo simulations of segregation in Pt-Ni catalyst nanoparticles

We have investigated the segregation of Pt atoms in the surfaces of Pt-Ni nanoparticles, using modified embedded atom method potentials and the Monte Carlo method. The nanoparticles are constructed with disordered fcc configurations at two fixed overall concentrations (50 at. % Pt and 75 at. % Pt). We use octahedral and cubo-octahedral nanoparticles terminated by {111} and {100} facets to examine the extent of the Pt segregation to the nanoparticle surfaces at T=600 K. The model particles contain between 586 and 4033 atoms (particle size ranging from 2.5 to 5 nm). Our results imply that a complete {100}-facet reconstruction could make the cubo-octahendral Pt-Ni nanoparticles most energetically favorable. We predict that at 600 K due to segregation the equilibrium cubo-octahedral Pt50Ni50 nanoparticles with fewer than 1289 atoms and Pt75Ni25 nanoparticles with fewer than 4033 atoms would achieve a surface-sandwich structure, in which the Pt atoms are enriched in the outermost and third atomic shells while the Ni atoms are enriched in the second atomic shell. We also find that, due to an order-disorder transition, the Pt50Ni50 cubo-octahedral nanoparticles containing more than 2406 atoms would form a core-shell structure with a Pt-enriched surface and a Pt-deficient homogenous core.     

An Asymmetric Synthesis of L-694,458, a Human Leukocyte Elastase Inhibitor, via Novel Enzyme Resolution of beta-Lactam Esters

A convergent synthesis of [S-(R,S)]-2-[4-[(4-methylpiperazin-1-yl)carbonyl]phenoxy]-3,3-diethyl-N-[1-[3,4-(methylenedioxy)phenyl]butyl]-4-oxo-1-azetidinecarboxamide (L-694,458, 1), a potent human leukocyte elastase inhibitor, was achieved via chiral synthesis of key intermediates: (S)-3,3-diethyl-4-[4'-[(N-methylpiperazin-1-yl)carbonylphenoxy]-2-azetidinone (2) and (R)-alpha-propylpiperonyl isocyanate (3). Synthesis of beta-lactam 2 was achieved by a novel enantioselective lipase hydrolysis of ester 5 to produce (S)-3,3-diethyl-4-(4'-carboxyphenoxy)-2-azetidinone (6) (60% yield, three cycles, 93% ee) with isolation, epimerization, and recycling of the undesired (R)-ester 5. Isocyanate 3 was prepared by chiral addition of Zn(n-Pr)(2) to piperonal (98% yield, 99.2% ee), azide displacement and reduction to (R)-alpha-propylpiperonylamine (11) (58% yield, 85% ee), crystallization as the D-pyroglutamic acid salt (92% yield, 98.2% ee), and isocyanate formation (98% yield) with phosgene.     

Curve crossing in two excited states of IBr studied by photofragmentation

Curve crossing in two excited states of IBr was studied by means of photodissociation with a pulse dye laser. The ratios of the formed ground state Br(²P_{$\text{3}\text{2}$} and excited Br(²P_{$\text{1}\text{2}$}) were measured at various wavelengths. They are compared with ratios calculated with the Landau-Zener formula, using parameters given by Child. The agreement between the measurements and the calculations is very good.