Quantification of veterinary antibiotics (sulfonamides and trimethoprim) in animal manure by liquid chromatography-mass spectrometry

A fast and cost effective method was developed to extract and quantify residues of veterinary antimicrobial agents (antibiotics) in animal manure by liquid-liquid extraction and liquid chromatography-mass spectrometry. The compounds investigated include six sulfonamides, one metabolite, and trimethoprim. The method was performed without sample clean up. Recoveries from spiked manure slurry samples (spike level = 1 mg/kg) were as follows: sulfaguanidine (52%), sulfadiazine (47%), sulfathiazole (64%), sulfamethazine (89%), its metabolite N4-acetyl-sulfamethazine (88%), sulfamethoxazole (84%), sulfadimethoxine (51%), and trimethoprim (64%). Relative standard deviations of the recoveries were less than 5% within the same day and less than 20% between days. The limit of quantification was below 0.1 mg/kg liquid manure slurry for all compounds and calibration curves obtained from extracts of spiked samples were linear up to a level of 5 mg/kg liquid manure, except for trimethoprim (0.01-0.5 mg/kg). Analysis of six grab samples taken in Switzerland from manure pits on farms where medicinal feed had been applied revealed total sulfonamide concentrations of up to 20 mg/kg liquid manure.     

Probing Ag nanoparticle surface oxidation in contact with (in)organics: an X‐ray scattering and fluorescence yield approach

Characterizing interfacial reactions is a crucial part of understanding the behavior of nanoparticles in nature and for unlocking their functional potential. Here, an advanced nanostructure characterization approach to study the corrosion processes of silver nanoparticles (Ag‐Nps), currently the most highly produced nanoparticle for nanotechnology, is presented. Corrosion of Ag‐Nps under aqueous conditions, in particular in the presence of organic matter and halide species common to many natural environments, is of particular importance because the release of toxic Ag⁺ from oxidation/dissolution of Ag‐Nps may strongly impact ecosystems. In this context, Ag‐Nps capped with polyvinolpyrrolidone (PVP) in contact with a simple proxy of organic matter in natural waters [polyacrylic acid (PAA) and Cl^? in solution] has been investigated. A combination of synchrotron‐based X‐ray standing‐wave fluorescence yield‐ and X‐ray diffraction‐based experiments on a sample consisting of an approximately single‐particle layer of Ag‐Nps deposited on a silicon substrate and coated by a thin film of PAA containing Cl revealed the formation of a stable AgCl corrosion product despite the presence of potential surface stabilizers (PVP and PAA). Diffusion and precipitation processes at the Ag‐Nps–PAA interface were characterized with a high spatial resolution using this new approach.     

Sound propagation above a porous road surface with extended reaction by boundary element method

Acoustic impedance of an absorbing interface is easily introduced in boundary element codes provided that a local reaction is assumed. But this assumption is not valid in the case of porous road surface. A two-domain approach was developed for the prediction of sound propagation above a porous layer that takes into account the sound propagation inside the porous material. The porous material is modeled by a homogeneous dissipative fluid medium. An alternative to this time consuming two-domain approach is proposed by using the grazing incidence approximate impedance in the traditional single-domain boundary element method (BEM). It can be checked that this value is numerically consistent with the surface impedance calculated at the interface from the pressure and surface velocity solutions of the two-domain approach. The single-domain BEM introducing this grazing incidence impedance is compared in terms of sound attenuation with analytical solutions and two-domain BEM. The comparison is also performed with the single-domain BEM using the normal incidence impedance, and reveals a much better accuracy for the prediction of sound propagation above a porous interface.     

Optical scar in a chaotic fiber

We propose to use a multimode optical fiber with a D-shaped cross section as a privileged system to image wavefunctions of a chaotic system. Scar modes are in particular the subject of our investigations. We study their imprints on the statistics of intensity and we show how the introduction of a localized gain region in the fiber is used to perform a selective amplification of scar modes.     

Pump−probe experiments at the TEMPO beamline using the low‐α operation mode of Synchrotron SOLEIL

The SOLEIL synchrotron radiation source is regularly operated in special filling modes dedicated to pump–probe experiments. Among others, the low‐α mode operation is characterized by shorter pulse duration and represents the natural bridge between 50 ps synchrotron pulses and femtosecond experiments. Here, the capabilities in low‐α mode of the experimental set‐ups developed at the TEMPO beamline to perform pump–probe experiments with soft X‐rays based on photoelectron or photon detection are presented. A 282 kHz repetition‐rate femtosecond laser is synchronized with the synchrotron radiation time structure to induce fast electronic and/or magnetic excitations. Detection is performed using a two‐dimensional space resolution plus time resolution detector based on microchannel plates equipped with a delay line. Results of time‐resolved photoelectron spectroscopy, circular dichroism and magnetic scattering experiments are reported, and their respective advantages and limitations in the framework of high‐time‐resolution pump–probe experiments compared and discussed.     

Linearly polarized, 3.35 W narrow-linewidth, 1150 nm fiber master oscillator power amplifier for frequency doubling to the yellow

A high-power linearly polarized Yb-doped silica fiber master oscillator power amplifier at 1150 nm is reported. It produced 3.35 W cw and 2.33 W of average power in 1 micros pulses at a 100 kHz repetition rate, both with 8 pm linewidth. This is the first report, to the best of our knowledge, of a high-power Yb-doped fiber amplifier at a wavelength longer than 1135 nm. The pulsed output was frequency doubled in a bulk periodically poled near-stoichiometric LiTaO(3) chip to generate 976 mW of average power at 575 nm with an overall system optical-to-optical efficiency of 9.8% with respect to launched pump power.     

Improved measurement of the hydrogen 1S-2S transition frequency

We have measured the 1S-2S transition frequency in atomic hydrogen via two-photon spectroscopy on a 5.8 K atomic beam. We obtain f(1S-2S) = 2,466,061,413,187,035 (10) Hz for the hyperfine centroid, in agreement with, but 3.3 times better than the previous result [M. Fischer et al., Phys. Rev. Lett. 92, 230802 (2004)]. The improvement to a fractional frequency uncertainty of 4.2 × 10(-15) arises mainly from an improved stability of the spectroscopy laser, and a better determination of the main systematic uncertainties, namely, the second order Doppler and ac and dc Stark shifts. The probe laser frequency was phase coherently linked to the mobile cesium fountain clock FOM via a frequency comb.