Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations

A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.     

Retention behavior of a homologous series and positional isomers of aliphatic amino acids in hydrophilic interaction chromatography

The retention behavior of several series of free α‐ and ω‐amino acids and positional isomers of amino pentanoic acid in the hydrophilic interaction chromatography mode (HILIC) was studied. The study was carried out on three stationary phases followed by post‐column derivatization with fluorescence detection in order to describe the retention mechanism of the tested amino acids. The effect of chromatographic conditions including acetonitrile content in the mobile phase, mobile phase pH (ranging from 3.5 to 6.5) and concentration of buffer in the mobile phase was investigated. The effect of the number of carbon atoms (n_C) in aliphatic chains of the individual homologue of α‐ and ω‐amino acids and the logarithm of the partition coefficient (logD) on retention was also a part of the presented study. A good correlation (r > 0.98) between the logk and logD values of amino acids or n_C, respectively, was observed. The described linear relationships were subsequently applied to predict the retention behavior of individual members of the homologous series of amino acids and to optimize the mobile phase composition in HILIC. The obtained results confirmed that the retention mechanism of α‐amino acids, ω‐amino acids and positional isomers of amino acids was based on the logD values and the number of carbon atoms in the aliphatic chains of amino acids. The elution order of ω‐amino acids and positional isomers of amino pentanoic acid was strongly dependent on the mobile phase pH in the investigated range whereas the retention factors of all α‐amino acids remained essentially unchanged on all tested stationary phases.     

Highly oriented crystalline Er:YAG and Er:YAP layers prepared by PLD and annealing

High quality, thick, highly oriented crystalline thin films of Yttrium Aluminum Garnet (Y₃Al₅O₁₂) and Yttrium Aluminum Perovskite (YAlO₃) doped with Erbium were prepared by pulsed laser deposition. Samples were created in vacuum or oxygen environment. Depositions were arranged at room temperature, or at high substrate temperatures ranging from 800 to 1100 °C. Amorphous layers were annealed by laser, or in oven (argon flow, temperatures in range from 1200 to 1400 °C). Fused silica and sapphire (0 0 0 1) were used as substrates. Properties of films were characterized by X-ray diffraction, atomic force microscopy, and by photoluminescence measurement. Size of crystalline grains was in the range 116-773 nm. Thickness of layers was up to 17 μm.     

Vapor pressure of selected aliphatic alcohols by ebulliometry. Part 2

Vapor pressures of six pentanols, 2-methyl-1-butanol (CAS Registry Number 137-32-6), 2-methyl-2-butanol (CAS Registry Number 75-85-4), 3-methyl-1-butanol (CAS Registry Number 123-51-3), 3-methyl-2-butanol (CAS Registry Number 598-75-4), 2-pentanol (CAS Registry Number 6032-29-7) and 3-pentanol (CAS Registry Number 584-02-1), were measured by the precision ebulliometry over an approximate pressure range from 9 to 99 kPa. The absolute uncertainties in pressure and temperature are estimated to be less than or equal to 7 Pa and 0.02 K, respectively. The results are represented by the Antoine equation and compared with available literature data.     

Chemiluminescence determination of antibacterial drug trimethoprim by automated sequential injection technique with permanganate and hexametaphosphate as reagents

Antibacterial drug trimethoprim [2,4-diamino-5-(3,4,5-trimethoxybenzyl)-pyrimidine] (I) was determined in pharmaceutical formulations by using a lab-made PC-controlled SIA analyser linked to conventional HPLC fluorimetric detector equipped with a chemiluminescence module. The chemical principle is the oxidation of I by KMnO(4) in acid medium; the reaction is accompanied by the emission of chemiluminescence, which is enhanced in the presence of hexametaphosphate (HMP). The optimum sequence and the flow parameters and concentrations and volumes of reagents aspirated optimised by a computer-aided simplex method were, 100 mul of 5 mM HMP, 40 mul of a test solution of I, 2 mul of 0.5 M H(2)SO(4) and 20 mul of 1 mM KMnO(4); the luminescing zone was pushed into the detector at a flow rate of 49 mul s(-1). The calibration graph relating the intensity of luminescence to concentration of I was parabolic (r=0.9994) in the range 0.5-100 mug ml(-1) of I with rectilinear part (r=0.9999) in the range 20-100 mug ml(-1) of I; the limit of detection was 0.1 mug ml(-1) of I. The method was used for the assay of Triprim(R) tablets (with nominal content 100 or 200 mg of I) for the active substance as well as for content uniformity tests; the R.S.D. values did not exceed 1% (n=5). The SIA results did not show statistical difference from those obtained by pharmacopoeial acidimetric titration in non-aqueous medium; the excipients such as microcrystalline cellulose, maze starch, povidone, talc, magnesium stearate and gelatin did not interfere.     

Fast choice of separation conditions for analyses by capillary zone electrophoresis using an information system Xemic

An information system Xemic applicable in analytical chemistry is described and its use in capillary electrophoresis for searching suitable separation conditions is demonstrated. This system is capable to provide suitable separation conditions even for analytes for which no electrophoretic experiments have been published so far. The system works with a database of components of anionic character the analyses of which have been performed, published in reviewed scientific journals, and included into a database created by an expert. Moreover, the system learned to search also in abstracts or complete scientific articles to find articles dealing with the determination of a substance in a given sample matrix. When no experiments have been published so far for a defined substance in a specific matrix, Xemic shows the separation conditions for determination of the substance regardless of the matrix. When no response can be found for the analyte of interest at all, the system Xemic works like an expert in the field and searches chemically similar substances and offers a series of substances the physicochemical properties of which are close to the followed analyte with respect to the behavior in the electric field, and shows working conditions for their analysis. Thus, the analyst puts only the order in the form of a given analyte in a given matrix and obtains a recommendation of a separation system that should enable to perform a successful separation. The system is not rigid and enables the operator to change the importance of individual attributes used in similarity search so as to obtain a broader or narrower group of similar components. With a certain probability the analyte of interest can be successfully analyzed under separation conditions that suited for the analysis of the most similar substances in the given matrix.     

Indirect carbon–carbon spin–spin couplings across one,two and three bonds in pyridine and diazine systems: experiment and theory

An excellent linear correlation is found between a large body of experimental spin–spin carbon–carbon couplings, J(CC), across one, two and three bonds in pyridine and diazine ring systems and the corresponding B3PW91/6‐311++G(d,p)//B3PW91/6‐311++G(d,p) computations. The correlation does not differ significantly from the simplest relationship possible, J(CC)_exp. = J(CC)_calcd., within a small and random spread of about 1 Hz. There are 276 experimental values considered, and 124 out of these are new and come from the present work. The aromatic carbon–carbon couplings vary from ?7.6 through +78.5 Hz. It is shown that the correlation provides a reliable tool for predictions of the signs of aromatic J(CC)'s even if the magnitudes of the latter are of the order of 1 Hz. It is demonstrated, for the first time, that the relatively weak ² J(CC) couplings, in the heteroaromatic systems studied, can bear either sign and span a considerable range of about 11 Hz. The character of the correlation indicates that rovibronic effects on aromatic J(CC)'s and those of nuclear motions on aromatic J(CC)'s are practically negligible. All of this is in a perfect agreement with our recent extensive studies on aromatic J(CC)'s in analogous benzene ring system. Substituent effects on the aromatic J(CC)'s turn out to be significant not only for ¹J(CC)'s but also for most of ³J(CC)'s and ² J(CC)'s, and the computation neatly reciprocates these trends. Copyright © 2008 John Wiley & Sons, Ltd.     

Carbon-13 NMR spectra of methylated cyclobutanes and ethyl cyclobutane-carboxylates

The ¹³C NMR spectra of cyclobutane and seven methylated homologs and of ethyl cyclobutanecarboxylate and five isomeric diethyl cyclobutanedicarboxylates are reported and substituent parameters for methyl groups in methylcyclobutanes are calculated. Of note is a sizeable and nearly configuration-independent upfield shifting γ-effect.