Simultaneous determination of ascorbic acid and dehydroascorbic acid by HPLC with postcolumn derivatisation and fluorometric detection

Summary A reproducible method is described for the separation and simultaneous and specific quantitation of ascorbic acid and dehydroascorbic acid by ion-pairing reversed-phase HPLC with fluorometric detection. Copper sulphate and copper acetate were compared as oxidizing reagents for ascorbic acid and 1,2-diaminobenzene dihydrochloride and 1,2-diamino-3,4-dimethylbenzene dihydrochloride as derivatising reagents. The HPLC-method was applied to human plasma. The detection limit reaches 16 ng for ascorbic acid and 3 ng for dehydroascorbic acid. Sample preparation is carried out by solid phase extraction with a recovery of 98%; it is compared with conventional precipitation of plasma proteins by metaphosphoric acid.     

Ab initio SCF structure investigation of β-hydroxypropionic acid and 3-aminopropionamide

The potential energy surfaces of β-hydroxypropionic acid and 3-aminopropionamide have been investigated by means of RHF /4-31G calculations. Structures, reaction paths for internal rotations, and the respective energy barriers are reported. The influence of the various intramolecular interactions on structural and energetical properties is shown and compared to the results previously obtained for β-alanine. © 1996 John Wiley & Sons, Inc.     

Formation of coordination compounds with aniline in the interlayer space of Ca<Superscript>2+</Superscript>-, Cu<Superscript>2+</Superscript>- and Fe<Superscript>3+</Superscript>-exchanged montmorillonite

The influence of Ca²⁺-, Cu²⁺- and Fe³⁺-exchanged montmorillonite (MMT) on the type of interaction with aniline in the interlayer space of MMT has been studied by means of X-ray powder diffraction and infrared spectra. Results of X-ray diffraction showed that aniline was successfully intercalated into the interlayer space of MMT. Based on IR spectra evaluation, aniline was indirectly coordinated through a water-bridge in Ca²⁺- and Fe³⁺-MMT and it was indirectly coordinated through a water-bridge as well as protonated in Cu²⁺-MMT (the spectrum of protonated aniline showed deformation and changes in the NH ₃ ⁺ absorption at approximately 1521 cm^?1). It is important to point out that Cu²⁺-MMT indirect coordination and protonation occur simultaneously.     

The protective role of melanin against UV damage in human skin

Human skin is repeatedly exposed to UVR that influences the function and survival of many cell types and is regarded as the main causative factor in the induction of skin cancer. It has been traditionally believed that skin pigmentation is the most important photoprotective factor, as melanin, besides functioning as a broadband UV absorbent, has antioxidant and radical scavenging properties. Besides, many epidemiological studies have shown a lower incidence for skin cancer in individuals with darker skin compared to those with fair skin. Skin pigmentation is of great cultural and cosmetic importance, yet the role of melanin in photoprotection is still controversial. This article outlines the major acute and chronic effects of UVR on human skin, the properties of melanin, the regulation of pigmentation and its effect on skin cancer prevention.     

Simultaneous Determination of 11 Elements in Fly Ash by Inductively Coupled Plasma Orthogonal Acceleration Time-of-Flight Mass Spectrometry After Closed-Vessel Microwave-Assisted Extraction with Ammonium Fluoride

A method for simultaneous multi-element analysis of fly ash samples by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometry (oaTOF-ICP-MS) after closed-vessel microwave extraction with ammonium fluoride was introduced here. Corrosive and/or toxic acids like HF, HCl or HClO₄, as well as HNO₃, which are commonly used during sample preparation of the fly ash samples, are avoided in this method. The spectral effects due to the formation of different Cl, Na, K, Ca, Mg-containing polyatomic species interfering with the determination of a number of elements like As, Se or Ni during the oaTOF-ICP-MS analysis are negligible. Under the optimum experimental extraction conditions evaluated using a fractional factorial design (10 mg of the sample extracted with 5 mL of 140 g/L NH₄F for 10 min at 200°C), analysis of the resulting supernatant with Rh as an internal standard enabled precise and accurate simultaneous determination of 11 elements (Li, Be, Ni, As, Se, Rb, Sb, Cs, W, Tl and U) at trace and ultratrace levels. The accuracy was assessed by analysing two certified reference materials, namely Fine Fly Ash CTA-FFA-1 and Constituent Elements in Coal Fly Ash Standard Reference Material® 1633b. The precision of the reported method was better than 10%.     

The development of an approach toward sterically-hindered chiral 2′-aryl-1,1′-binaphthalenes functionalized at position 2

Several approaches were examined for the preparation of 1,1′-binaphthalene derivatives bearing sterically demanding ortho-substituted aryl at position 2′ which are suitable for further functionalization at position 2. Steric hindrance of ortho-substituted aryl groups was critical for the approach through BINOL monotriflate. Among variations of cross-coupling reactions of 2,2′-dihalo-1,1′-binaphthalenes, Negishi arylation of an enantiopure 2,2′-dibromide was found to be the method of choice for regioselective and stereoconservative preparation of the target 2′-monoarylated precursor. Functionalization of the latter at position 2 was demonstrated by bromine substitution via lithiation followed by the reaction with several electrophiles.     

Physicochemical characterization of phosphinic pseudopeptides by capillary zone electrophoresis in highly acidic background electrolytes

Phosphinic pseudopeptides (i.e., peptide isosteres with one peptide bond replaced by a phosphinic acid moiety) were analyzed and physicochemically characterized by capillary zone electrophoresis in the pH range of 1.1-3.2, employing phosphoric, phosphinic, oxalic and dichloroacetic acids as background electrolyte (BGE) constituents. The acid dissociation constant (pK(a)) of phosphinate group in phosphinic pseudopeptides and ionic mobilities of these analytes were determined from the pH dependence of their effective electrophoretic mobilities corrected to standard temperature and constant ionic strength of the BGEs. It was shown that these corrections are necessary whenever precise mobility data at very low pH are to be determined. Additionally, it was found that the ionic mobilities of the phosphinic pseudopeptides and pK(a) of their phosphinate group are affected by the BGE constituent used. The variability of migration behavior of the pseudopeptides can be attributed to their ion-pairing formation with the BGE components.     

Isotachophoretic determination of stability constants of Ho and Y complexes with diethylenetriaminepentaacetic acid and 1,4,7,10-tetraazadodecane-N,N',N'',N'''-tetraacetic acid

The method of capillary isotachophoresis with conductivity detection was applied for the determination of the physico-chemical characteristics (conditional stability constants log beta') of holmium and yttrium complexes with DTPA (diethylenetriaminepentaacetic acid) and DOTA (1,4,7,10-tetraazadodecane-N,N',N',N'-tetraacetic acid). The log beta' determination is based on the linear relation between the stability constants of lanthanide-DTPA (lanthanide-DOTA) complexes and the reduction of the zone of the complex owing to the bleeding phenomena (liberating free metal ion). The stability constants calculated using this relationship are comparable with the literary data obtained by other methods for both holmium (log beta'(Ho-DTPA)=21.9, log beta'(Ho-DOTA)=24.5) and yttrium complexes (log beta'(Y-DTPA)=21.2, log beta'(Y-DOTA)=24.4). Capillary isotachophoresis was applied for the determination of the optimum composition of the reaction mixture (metal:ligand ratio) as well.