Electronic effects steer the mechanism of asymmetric hydrogenations of unfunctionalized aryl-substituted alkenes

Density functional theory (PBE and B3LYP) was used to study asymmetric hydrogenations of alkenes catalyzed by an iridium imidazolylidine oxazoline complex. The calculation predicts that the alkene preferentially coordinates to the site trans to the carbene. The coordinated alkene then reacts first with the H2 ligand, then with the hydride to form alkane. Finally, the alkane is released by equilibrating with extrinsic H2 and alkene. Enantioface selectivities for hydrogenations of trisubstituted alkenes seem to be driven primarily by steric interactions with the adamantyl part of the ligand; only the smallest substituents can adopt a site close to it. Application of this theoretical model leads to correct predictions regarding the experimentally observed sense and magnitude of the enantioselectivities.     

A convenient protocol for selective cleavage of 2-hydroxy acid amides. Application to semisynthesis of the cyclic heptapeptide aza HUN-7293

A two-step protocol for the first chemoselective cleavage of 2-hydroxy acid amides has been developed. Mesylation of the model substrate 2-(hydroxypropionylamino)-4-methylpentanoic acid methyl ester (11) followed by treatment with N-ethylthiourea (13) allows cleavage of 2-hydroxy acid amides under smooth conditions. Successful application of this methodology to the open-chain transesterification product 15 (methylester) of the cyclic heptadepsipeptide HUN-7293, a potent inhibitor of inducible cell adhesion molecule expression, delivered the corresponding hexapeptide 18 with unprotected N-terminus in 70-75% yield. This result demonstrates that the protocol developed even works in the presence of an ester and several methylated and unmethylated amide bonds. Finally, a sequence of ligation of methyl D-dehydroglutaminate (20) to the C-terminus of the saponification product 21, followed by the degradation protocol and ring closure, allowed chemical "point mutation" at the DGCN site affording the aza analogue of HUN-7293 (24) in 15% overall yield. To the best of our knowledge this is the first report on chemoselective cleavage of 2-hydroxy acid amides.     

Synthesis and cross-coupling reactions of substituted 5-triflyloxyindoles

N-arylsulfonyl quinone monoimines undergo smooth cycloadditions in a [4+2] sense to yield the expected cycloadducts. The crude cycloadducts, when subjected to a short series of simple transformations, produce synthetically useful quantities of 5-triflyloxyindoles in excellent overall yields. Such compounds are excellent participants in cross-coupling chemistry.     

Rhodium-catalyzed reductive aldol reactions using aldehydes as the stoichiometric reductants

Chelated acyl rhodium hydrides, generated from the addition of [Rh(dppe)]ClO4 to beta-sulfide-substituted aldehydes, can function as the stoichiometric reductants in reductive aldol processes. Unsaturated nitriles, esters, and ketones can be used as enolate equivalents, and a variety of simple alpha- and beta-substituted aldehydes can be employed. The use of a second, more electrophilic, aldehyde allows three-component reactions to be performed.     

A recycling technique for the chromatographic separation of enantiomers and diastereomers on triacetylcellulose

A simple and inexpensive equipment for the optical resolution of enantiomers (and separation of diastereomers) on triacetylcellulose in ethanol at elevated pressure is described. It involves a closed circuit of solvent (pump—column—detector—pump) allowing a continuous chromatography up to 16 cycles without stopping the flow or handling fractions.This useful and versatile method permitting also the determination of enantiomeric purities is illustrated by several examples of centro-, axial- and planarchiral arenes and metallocenes.Herrn Prof. Dr.U. Schmidt, Stuttgart, zum 60. Geburtstag gewidmet.     

Fluordiazadiphosphetidine, 3. Mitt.: Die thermische Behandlung von 2,2,2,4,4,4-Hexafluoro-1,3-dimethyl-1,3,2,4-diazadiphosphetidin unter Druck in Gegenwart von Phosphor(V)fluorid und Alkalimetallfluoriden

Prolonged heating of (CH₃NPF₃)₂ in a sealed tube at 120°C yields (CH₃N)₄P₃F₇ and PF₅. Under the experimental conditions these compounds react to (CH₃N)₄P₃F₆ ⁺PF₆ ^–. Reaction of (CH₃NPF₃)₂ in the presence of PF₅ leads to a marked decrease in the formation of the ionic compound. The influence of the fluoride donating saltsMF (M=Li, Na, K, Cs) is investigated.

---

---

Mit 1 Abbildung

---

Früher: Alkyliminophosphorsäuretrihalogenide, 1. und 2. Mitt.     

Analysis of cyanobacterial toxins by hydrophilic interaction liquid chromatography-mass spectrometry

The combination of hydrophilic interaction liquid chromatography with electrospray mass spectrometry (HILIC-MS) has been investigated as a tool for the analysis of assorted toxins produced by cyanobacteria. Toxins examined included saxitoxin and its various analogues (1-18), anatoxin-a (ATX-a, 19), cylindrospermopsin (CYN, 20), deoxycylindrospermopsin (doCYN, 21), and microcystins-LR (22) and -RR (23). The saxitoxins could be unequivocally detected in one isocratic analysis using a TSK gel Amide-80 column eluted with 65% B, where eluent A is water and B is a 95% acetonitrile/water solution, both containing 2.0 mM ammonium formate and 3.6 mM formic acid. The analysis of ATX-a, CYN and doCYN required 75% B isocratic. Simultaneous determination of 1-21 was also possible by using gradient elution. HILIC proved to be suitable for the analysis of microcystins, but peak shape was not symmetric and it was concluded that these compounds are best analysed using existing reversed-phase methods. The HILIC-MS method was applied to the analysis of field and cultured samples of Anabaena circinalis and Cylindrospermopsis raciborskii. In general, the method proved quite robust with similar results obtained in two different laboratories using different instrumentation.     

Synthesis and properties of new ditertiary stibines based upon o-, m- or p-xylyl and m- or p-phenylene backbones and their complexes with tungsten, iron and nickel carbonyls

High yield syntheses for 1,2-, 1,3-, and 1,4-xylyl distibines (1,2-C6H4(CH2SbMe2)2, 1,3-C6H4(CH2SbMe2)2, 1,4-C6H4(CH2SbMe2)2, respectively) from Me2SbCl (conveniently made in situ from Me2PhSb and HClgas) and the appropriate di-Grignard are reported. The 1,3- and 1,4-phenylene distibines, 1,3-C6H4(SbMe2)2 and 1,4-C6H4(SbMe2)2, were made similarly. The new ligands have been characterised by mass spectrometry, 1H and 13C[1H] NMR spectroscopy, and by the preparation of methiodide derivatives. The crystal structures of 1,4-C6H4(CH2SbMe2)2 and [1,3-C6H4(CH2SbMe3)2]I2 have been determined. The synthesis of 1,2-C6H4(CH2SbPh2)2 has been achieved similarly in modest yield and the distibine converted into the tetra-iodo-derivative 1,2-C6H4(CH2SbPh2I2)2. The coordination modes available to these ligands have been probed by the synthesis and characterisation of complexes with nickel, iron and tungsten carbonyls. The crystal structure of [[Fe(CO)4]2[micro-1,3-C6H4(CH2SbMe2)2]] has been determined. The spectroscopic properties of these carbonyl derivatives have been compared with those of complexes of other antimony ligands, and in some cases with diphosphine and diarsine complexes, to probe the electronic properties of the new ligands.     

Interpolation of diabatic potential energy surfaces

A method is presented for constructing diabatic potential energy matrices from ab initio quantum chemistry data. The method is similar to that reported previously for single adiabatic potential energy surfaces, but correctly accounts for the nuclear permutation symmetry of diabatic potential energy matrices and other complications that arise from the derivative coupling of electronic states. The method is tested by comparison with an analytic model for the two lowest energy states of H(3).     

(4+2)-cycloadditions of substituted arenediazocyanides: A kinetic study of a new dienophile

The rate constants of the (4+2)-cycloaddition reaction between substituted $\text{E}$-arenediazocyanides and 2,3-dimethyl-1,3-butadiene have been determined in several solvents. The reaction displays linear Hammett behavior; the data suggest a concerted reaction mechanism.