Dissociations of Complexes Between Monovalent Metal Ions and Aromatic Amino Acid or Histidine

The fragmentations of [AA + M]⁺ complexes, where AA = Phe, Tyr, Trp, or His, and M is a monovalent metal (Li, Na, or Ag), have been exhaustively studied through collision-induced dissociation (CID) and through deuterium labeling. Dissociations of the Li- and Ag-containing complexes gave a large number of fragment ions; by contrast, the sodium/amino acid complexes have lower binding energies, and dissociation resulted in much simpler spectra, with loss of the entire ligand dominating. Unambiguous assignments of these fragment ions were made and formation mechanisms are proposed. Of particular interest are fragmentations in which the charge was retained on the organic fragment and the metal was lost, either as a metal hydride (AgH) or hydroxide (LiOH) or as the silver atom (Ag^?).

Aliphatic Polyester Blends Based upon Poly(Lactic Acid) and Oligomeric Poly(Hexamethylene Succinate)

Abstract

In an attempt to gain a degree of control over the mechanical and degradation properties of poly(lactic acid) [PLA], large-scale efforts are underway to alter the phase morphology of PLA through chemical and physical modification. Consistent with this theme, our work aims to adjust the molecular architecture of highly amorphous PLA with an increasing concentration of hydroxy-terminated oligomeric poly(hexamethylene succinate) [PHS]. Gel-permeation chromatography (GPC) verifies the enhanced presence of PHS in the blends with a concomitant reduction in number-average molecular weight as the weight fraction of PHS is raised from 0.10 to 0.40. Differential scanning calorimetry (DSC) indicates amorphous phase compatibility between PHS and PLA at weight compositions of 10/90 and 20/80. However, as the amount of PHS approaches 30 and 40 wt%, the PHS exhibits the ability to crystallize independently from the induced PLA crystalline phase. Dynamic mechanical thermal analysis (DMTA) illustrates variable behavior of the materials under tension as a consequence of structural alterations generated by the oligoester. Finally, preliminary results suggest that these alterations may suppress the hydrolytic degradation of PLA.     

Electrochromic and Conductivity Behavior of Tris[Ester-Substituted Bipyridine]Ruthenium[II] Polymers on Electrodes

Complexes of ruthenium with 2,2′-bipyridines having electron-withdrawing ester functions in the 5,5′ positions have been prepared, and they are polymerizable. Films can be cast on electrodes from solutions of the monomer and then polymerized thermally. Once formed, the films are electroactive and quite stable in the absence of O₂. The ruthenium complexes in this polymer have a rich electrochemistry and can exist in seven stable oxidation states. The spectral properties of the polymer are such that, as the oxidation state of the complex is changed successively from 2+ to 4-, the polymer undergoes vivid changes in color. The material is thus of interest as an electrochromic material. Additionally, when the polymer is reduced to the formal zero-valent form it becomes an ohmic conductor with semiconductorlike properties.     

Sequential Alkylation of Tröger's Base. An Approach to New Chiral Ligands

Heterocycles derived from Tröger's base were shown to complex with metal salts in 2:1 ligand:salt ratios as monodentate or bidentate ligands depending on structure.     

How Strain Affects the Reactivity of Surface Metal Oxide Catalysts

Highly dispersed molybdenum oxide supported on mesoporous silica SBA‐15 has been prepared by anion exchange resulting in a series of catalysts with changing Mo densities (0.2–2.5 Mo atoms nm^?2). X‐ray absorption, UV/Vis, Raman, and IR spectroscopy indicate that doubly anchored tetrahedral dioxo MoO₄ units are the major surface species at all loadings. Higher reducibility at loadings close to the monolayer measured by temperature‐programmed reduction and a steep increase in the catalytic activity observed in metathesis of propene and oxidative dehydrogenation of propane at 8 % of Mo loading are attributed to frustration of Mo oxide surface species and lateral interactions. Based on DFT calculations, NEXAFS spectra at the O‐K‐edge at high Mo loadings are explained by distorted MoO₄ complexes. Limited availability of anchor silanol groups at high loadings forces the MoO₄ groups to form more strained configurations. The occurrence of strain is linked to the increase in reactivity.     

Determination of tenuazonic acid in human urine by means of a stable isotope dilution assay

The content of tenuazonic acid in human urine was determined by a stable isotope dilution assay (SIDA) that was recently developed for the analysis of food commodities and extensively re-validated for urine matrix in this study. Linearity of the response curve was proven between molar ratios n(labeled standard)/n(analyte) of 0.02–100. The limits of detection and determination were 0.2 and 0.6 μg/L, respectively. The mean recovery of the stable isotope dilution assay was 102?±?3 % in the range between 1.0 and 100 μg/L. Interassay precision was 6.7 % (relative standard deviation of three triplicate analyses of a human urine sample during 3 weeks). The method was applied to two studies dealing with urinary excretion of tenuazonic acid: In the first study, tenuazonic acid was quantified in the 24-h urine of six volunteers from Germany (three female, three male) in a concentration range of 1.3–17.3 μg/L or 2.3–10.3 ng/mg^?1 creatinine, respectively. In the second study, two volunteers (one female, one male) ingested 30 μg tenuazonic acid by consumption of naturally contaminated whole meal sorghum infant cereals and tomato juice, respectively. The urinary excretion of the ingested tenuazonic acid was 54–81 % after 6 h, depending on matrix and volunteer. After 24 h, 87–93 % of the ingested amount of tenuazonic acid was excreted, but the fate of the remaining about 10 % is open. Thus, it is not possible to exclude potential health hazards for the consumer, completely.

Kinetic Investigation of Poly(ethylene glycol) Hydrogel Formation via Perfusion‐Based Frontal Photopolymerization: Influence of Free‐Radical Polymerization Conditions on Frontal Velocity and Swelling Gradients

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels are extensively used as scaffolds in tissue engineering. The ability to spatially control hydrogel properties is critical for designing scaffolds that direct cell behavior and tissue regeneration. To this end, we have recently developed a polymerization technique, perfusion‐based frontal photopolymerization, to generate tunable gradients in PEG hydrogels. This study explores the effects of polymerization conditions on the velocity of the propagating front and its influence on gradients in hydrogel swelling. Alterations in photoinitiator perfusion rate result in the largest variations in frontal velocity and in the magnitude of the swelling gradient among all polymerization conditions investigated.

     

Automated,high performance,flow-through chemiluminescence microarray for the multiplexed detection of phycotoxins

A novel multiplexed immunoassay for the analysis of phycotoxins in shellfish samples has been developed. Therefore, a regenerable chemiluminescence (CL) microarray was established which is able to analyze automatically three different phycotoxins (domoic acid (DA), okadaic acid (OA) and saxitoxin (STX)) in parallel on the analysis platform MCR3. As a test format an indirect competitive immunoassay format was applied. These phycotoxins were directly immobilized on an epoxy-activated PEG chip surface. The parallel analysis was enabled by the simultaneous addition of all analytes and specific antibodies on one microarray chip. After the competitive reaction, the CL signal was recorded by a CCD camera. Due to the ability to regenerate the toxin microarray, internal calibrations of phycotoxins in parallel were performed using the same microarray chip, which was suitable for 25 consecutive measurements. For the three target phycotoxins multi-analyte calibration curves were generated. In extracted shellfish matrix, the determined LODs for DA, OA and STX with values of 0.5 ± 0.3 μg L⁻¹, 1.0 ± 0.6 μg L⁻¹, and 0.4 ± 0.2 μg L⁻¹ were slightly lower than in PBS buffer. For determination of toxin recoveries, the observed signal loss in the regeneration was corrected. After applying mathematical corrections spiked shellfish samples were quantified with recoveries for DA, OA, and STX of 86.2%, 102.5%, and 61.6%, respectively, in 20 min. This is the first demonstration of an antibody based phycotoxin microarray.     

Solid phase microextraction fills the gap in tissue sampling protocols

Metabolomics and biomarkers discovery are an integral part of bioanalysis. However, untargeted tissue analysis remains as the bottleneck of such studies due to the invasiveness of sample collection, as well as the laborious and time-consuming sample preparation protocols. In the current study, technology integrating in vivo sampling, sample preparation and global extraction of metabolites – solid phase microextraction was presented and evaluated during liver and lung transplantation in pig model. Sampling approaches, including selection of the probe, transportation, storage conditions and analyte coverage were discussed. The applicability of the method for metabolomics studies was demonstrated during lung transplantation experiments.