Novel human lens metabolites from normal and cataractous human lenses

4-(2-Aminophenyl)-4-oxobutanoic acid, 4-(2-amino-3-hydroxyphenyl)-4-oxobutanoic acid and glutathionyl-kynurenine have been identified as novel metabolites in normal and cataractous human lenses following total synthesis and comparison with authentic human lens samples. Their structures are consistent with those derived from the major human lens UV filters kynurenine and 3-hydroxykynurenine, and it is proposed that these compounds also play a role as UV filters. These metabolites were isolated in pmol/mg levels (dry mass) in lenses. 4-(2-Amino-3-hydroxyphenyl)-4-oxobutanoic acid and glutathionyl-kynurenine were found to be unstable at physiological pH. Other potential metabolites, glutathionyl-3-hydroxykynurenine, kynurenine yellow and 3-hydroxykynurenine yellow, were not detected in either normal or cataractous lenses.     

A total synthesis of (±)-cannabisativine

A synthesis of racemic cannabisativine is reported. Intramolecular opening of an $\text{erythro}$-acetoxy epoxide by a secondary amino group provided the side chain containing the desired stereochemistry.     

Conjugate addition of (trimethylstannyl)copper reagents to α,β-acetylenic N,N-dimethylamides. Trapping of the intermediates with electrophiles

A study of the reaction of Me₃SnCu·.Me₂S (1) and [Me₃SnCuSPh]Li (2) with α,β - acetylenic N,N-dimethylamides 3 shows (a) that the overall process can be controlled experimentally so as to produce either N,N-dimethyl ($\text{E}$)-(4) or ($\text{Z}$)-3-trimethylstannyl-2-alkenamides (5), (b) that the initially formed intermediate derived from interaction of 2 and 3 is significantly more stable than that obtained by reaction of 2 and α,β-acetylenic esters, and (c) that the intermediate produced by treating 3 with 1 can be trapped with electrophiles other than proton.     

Stabilization of mixed valence states in partly oxidized one-dimensional transition metal systems

The spatial hole-state properties of partly oxidized one-dimensional (1D) organometallic solids with weak metal-metal interactions (either due to large separations between the corresponding building blocks or due to bridging organic ligand functions) have been studied in the crystal orbital (CO) formalism based on the tight-binding technique. The numerical analysis is restricted to insulating band states. The employed computational model is a semiempirical self-consistent-field (SCF) Hartree-Fock (HF) CO variant derived within the INDO (intermediate neglect of differential overlap) approximation. We have adopted a simple averaging procedure for the open shell systems which is based on a density operator that has its origin in the grand canonical (GC) ensemble in order to avoid the numerical difficulties of restricted or unrestricted tight-binding calculations on the oxidized 1D chains. The present method, however, is not related to temperature-dependent equilibria in statistical mechanics but is only a formal, highly efficient approach for the formation of average-states in the mean-field approximation. As one-dimensional models we have adopted the infinite tetracyanatonickelate(II), Ni(CN) ₄ ^2– 1, and the cyclopentadienylmanganese(I), MnCp2, systems. The electron removal processes in both 1D materials are more (1) or less (2) metal-centered ( states). The mean-field ground states of both oxidized modifications correspond to broken symmetry CDW (charge density wave) solutions that lead to mixed valence states with inequivalent numbers of electrons at adjacent transition metal centers. This symmetry breaking guarantees that important left-right correlations between the 3d atoms are taken into account even in the SCF HF approximation. The valence trapping in1 is strong, i.e. the mutual charge separation between the Ni centers amounts to 0.87e. The bridging organic ligands in2 prevent such pronounced differences of the net charges at the Mn centers and cause a reduction of the charge separation to 0.09e–0.14e.     

Receptor-bound conformation of an alpha(5)beta(1) integrin antagonist by (15)N-edited 2D transferred nuclear overhauser effects

We report the results of (15)N-edited 2D transferred NOE experiments of the partially (15)N-labeled alpha(5)beta(1) antagonist c[Mpa(15)N-Arg-(15)N-Gly-(15)N-Asp-(15)N-Asp-(15)N-Val-Cys]-NH(2) (Mpa denotes mercaptopropionic acid) in the presence of the native alpha(5)beta(1) receptor. The alpha(5)beta(1) integrin receptor is believed to be involved in tumor metastasis and the rational design of alpha(5)beta(1) integrin antagonist is therefore of considerable interest. Our experiments provide insight into the alpha(5)beta(1) receptor-bound conformation of the antagonist c[MpaRGDDVC]-NH2 and will be important for the design of novel antagonists.     

Improved relativistic energy-consistent pseudopotentials for 3d-transition metals

Energy-consistent relativistic pseudopotentials for 3d-transition metals Sc to Ni based on modified valence energies are proposed. The pseudopotentials are adjusted at the finite difference level within the intermediate coupling scheme with respect to multi-configuration Dirac–Hartree–Fock data based on the Dirac–Coulomb Hamiltonian with an estimate of the Breit contributions in quasidegenerate perturbation theory. Typically a few hundred to thousand J levels arising from about 35 to 40 configurations ranging from the anion down to the highly charged cation are considered as references. It is shown that introducing a small common energetic shift of all valence energies reduces the errors in the parameter adjustment considerably. Results of highly correlated atomic and molecular test calculations using large basis sets and basis set extrapolation techniques are presented. To be submitted to Theoretical Chemistry Accounts (special volume on the occasion of Prof. Dr. H. Stoll's 60th birthday)     

Understanding the dynamics of signal transduction for adsorption of gases and vapors on carbon nanotube sensors

Adsorption dynamics and their influence on signal transduction for carbon nanotube-based chemical sensors are explored using continuum site balance equations and a mass action model. These sensors are shown to possess both reversible and irreversible binding sites that can be modeled independently. For the case of irreversible adsorption, it is shown that the characteristic response time scales inversely with analyte concentration. It is inappropriate to report a detection limit for this type of sensor since any nonzero analyte concentration can be detected in theory but at a cost of increasing transduction time with decreasing concentration. The response curve should examine the initial rate of signal change as a function of analyte concentration. Conversely, a reversible sensor has a predefined detection limit, independent of the detector geometry with a characteristic time scaling that becomes constant in the zero analyte concentration limit. A simple analytical test is presented to distinguish between these two mechanisms from the transient response of a nanotube sensor array. Two systems appearing in the literature are shown to have an irreversible component, and regressed surface rate constants for this component are similar across different sensor geometries and analytes.     

Analysis of cyanobacterial toxins by hydrophilic interaction liquid chromatography-mass spectrometry

The combination of hydrophilic interaction liquid chromatography with electrospray mass spectrometry (HILIC-MS) has been investigated as a tool for the analysis of assorted toxins produced by cyanobacteria. Toxins examined included saxitoxin and its various analogues (1-18), anatoxin-a (ATX-a, 19), cylindrospermopsin (CYN, 20), deoxycylindrospermopsin (doCYN, 21), and microcystins-LR (22) and -RR (23). The saxitoxins could be unequivocally detected in one isocratic analysis using a TSK gel Amide-80 column eluted with 65% B, where eluent A is water and B is a 95% acetonitrile/water solution, both containing 2.0 mM ammonium formate and 3.6 mM formic acid. The analysis of ATX-a, CYN and doCYN required 75% B isocratic. Simultaneous determination of 1-21 was also possible by using gradient elution. HILIC proved to be suitable for the analysis of microcystins, but peak shape was not symmetric and it was concluded that these compounds are best analysed using existing reversed-phase methods. The HILIC-MS method was applied to the analysis of field and cultured samples of Anabaena circinalis and Cylindrospermopsis raciborskii. In general, the method proved quite robust with similar results obtained in two different laboratories using different instrumentation.     

Synthesis and properties of new ditertiary stibines based upon o-, m- or p-xylyl and m- or p-phenylene backbones and their complexes with tungsten, iron and nickel carbonyls

High yield syntheses for 1,2-, 1,3-, and 1,4-xylyl distibines (1,2-C6H4(CH2SbMe2)2, 1,3-C6H4(CH2SbMe2)2, 1,4-C6H4(CH2SbMe2)2, respectively) from Me2SbCl (conveniently made in situ from Me2PhSb and HClgas) and the appropriate di-Grignard are reported. The 1,3- and 1,4-phenylene distibines, 1,3-C6H4(SbMe2)2 and 1,4-C6H4(SbMe2)2, were made similarly. The new ligands have been characterised by mass spectrometry, 1H and 13C[1H] NMR spectroscopy, and by the preparation of methiodide derivatives. The crystal structures of 1,4-C6H4(CH2SbMe2)2 and [1,3-C6H4(CH2SbMe3)2]I2 have been determined. The synthesis of 1,2-C6H4(CH2SbPh2)2 has been achieved similarly in modest yield and the distibine converted into the tetra-iodo-derivative 1,2-C6H4(CH2SbPh2I2)2. The coordination modes available to these ligands have been probed by the synthesis and characterisation of complexes with nickel, iron and tungsten carbonyls. The crystal structure of [[Fe(CO)4]2[micro-1,3-C6H4(CH2SbMe2)2]] has been determined. The spectroscopic properties of these carbonyl derivatives have been compared with those of complexes of other antimony ligands, and in some cases with diphosphine and diarsine complexes, to probe the electronic properties of the new ligands.