Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

Packing Non-Zero A-Paths In Group-Labelled Graphs

Let G=(V,E) be an oriented graph whose edges are labelled by the elements of a group Γ and let A⊂V. An A-path is a path whose ends are both in A. The weight of a path P in G is the sum of the group values on forward oriented arcs minus the sum of the backward oriented arcs in P. (If Γ is not abelian, we sum the labels in their order along the path.) We are interested in the maximum number of vertex-disjoint A-paths each of non-zero weight. When A = V this problem is equivalent to the maximum matching problem. The general case also includes Mader's S-paths problem. We prove that for any positive integer k, either there are k vertex-disjoint A-paths each of non-zero weight, or there is a set of at most 2k −2 vertices that meets each of the non-zero A-paths. This result is obtained as a consequence of an exact min-max theorem. These results were obtained at a workshop on Structural Graph Theory at the PIMS Institute in Vancouver, Canada. This research was partially conducted during the period the first author served as a Clay Mathematics Institute Long-Term Prize Fellow.     

A note on the Σ1 spectrum of a theory

Let T be a suitable system of classical set theory. We will show, that the Σ₁ spectrum of T, i.e. the set of ordinals having good Σ₁ definition in T is an initial segment of the ordinals. Received: 11 October 1999 / Published online: 12 December 2001     

Codes with a Certain Weight-preserving Transitive Group of Automorphisms

We determine all linear codes C containing the constant code E, for which there is a weight-preserving group of semilinear automorphisms which acts transitively on the set of nontrivial cosets of E in C. Michael Giudici - The author holds an Australian Postdoctoral Fellowship.     

Cochains and homotopy type

Finite type nilpotent spaces are weakly equivalent if and only if their singular cochains are quasi-isomorphic as E_∞ algebras. The cochain functor from the homotopy category of finite type nilpotent spaces to the homotopy category of E_∞ algebras is faithful but not full.     

Diffusive motion of iron microcrystals studied by Mössbauer spectroscopy

A new model is presented which explains well the dramatic decrease of the Mössbauer line intensities with raising temperatures for freely dispersed iron microscrystals. In contrast to other theories which consider mainly vibration to be responsible we discuss here the decrease in terms of large amplitude diffusive rotational or translational jumps of the particles. Such diffusive jumps lead — in agreement with the observation — to a strong reduction of the Mössbauer-intensity without broadening the line width in a noticeable way. The typical potential well for a diffusing particle in an equilibrium position is derived quantitatively to be 13 meV. The model might be important also for a new understanding of the dynamics of catalytic clusters either in contact with each other or with larger solid surfaces.Part of this work was supported by the DFG Sonderforschungsbereich 306, Konstanz     

Isotone relations revisited

We propose a new approach towards proving that the fixed point property for ordered sets is preserved by products. This approach uses a characterization of fixed points in products via isotone relations. First explorations of classes of isotone relations are presented. These first explorations give us hope that this approach could lead to advances on the Product Problem.