Influence of neutral cyclodextrin concentration on plate numbers in capillary electrophoresis

A quantitative theory of plate number N in capillary electrophoresis was developed for buffers containing neutral cyclodextrins (CDs) capable of forming inclusion complexes. In the theory, N was modeled by longitudinal diffusion, injection extent, width of the detection window, and the detector time constant. The apparent mobility was modeled as a weighted sum of the mobilities of the free-solution analyte and the inclusion complex. The apparent diffusion coefficient was modeled as a similarly weighted sum. Both the apparent mobility and diffusion coefficient were corrected by functions that compensated for increases of buffer temperature caused by Joule heat. The experimental N's and apparent mobilities of neutral thiourea and of the anions, dansyl D- and L-leucine, dansyl D- and L-aspartic acid, benzoate, and 4-nitrophenolate, were determined in buffers containing from 0 to 15 mM beta-CD. The binding constants, and mobilities and diffusion coefficients of the free-solution analyte and inclusion complex, were calculated as regression coefficients by fitting theory to these determinations. The regression coefficients were shown to have physicochemical meaning, as assessed by literature values, independent measurements, and theoretical predictions. The assessment showed the Nernst-Einstein equation does not relate mobilities and diffusion coefficients at the electrolyte concentration used. The interdependence of mobilities, diffusion coefficients, binding constants, and other dispersion sources was interpreted to evaluate the factors affecting the variation of N with CD concentration. From the interpretation, an approximate equation for N in low-concentration CD buffers was derived. The equation depends on free-solution and inclusion-complex mobilities and diffusion coefficients, the binding constant, the potential difference over the effective capillary length, and the number of plates in a CD-free buffer.     

Strategies for locating disulfide bonds in a monoclonal antibody via mass spectrometry

The location of the disulfide bonds in a recombinant monoclonal antibody was confirmed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry (MS). A non-reduced Endoproteinase Lys-C (Endo Lys-C) digest of the antibody was analyzed directly by MALDI-TOFMS. The sample was then reduced on-plate by depositing dithiothreitol (DTT) on the sample spot and re-analyzed by MALDI-TOFMS. The disulfide bonds were assigned based on the disappearance of certain mass ions in the non-reduced digest and the appearance of product ions in the reduced digest. A rapid LC/ESI-MS protocol was also developed to determine the location of the disulfide bonds. The peptides generated from the Endo Lys-C digest of the antibody were partially separated on a high performance liquid chromatography (HPLC) column by utilizing a steep gradient and analyzed by ESI-MS. The masses of the partially resolved peptides were determined by deconvoluting the mass spectra.     

Heterogeneous reactions : VI. Reactions of trimethylchlorosilane,dimethyldichlorosilane and chloromethyldimethylchlorosilane with potassium t-butoxide and sodium methoxide

The heterogeneous gas-solid reaction of trimethylchlorosilane and an equal molar mixture of potassium t-butoxide and sodium methoxide gave exclusively trimethyl-t-butoxysilane. A similar reaction utilizing dimethyldichlorosilane as the vapor phase substrate gave predominant incorporation of butoxide. The heterogeneous reaction of chloromethyldimethylchlorosilane with these two bases was extensively studied. The parameters investigated for the latter system include the dependence of the product distribution on temperature, nitrogen flow rate and the relative hydroxide content of the solid alkoxide base. These studies allow the assessment of the relative reactivities of these bases under the conditions of heterogeneous gas/solid reaction. Under these conditions and with partially hydrolyzed bases a substantial amount of displacement of the chloromethyl group from chloromethyldimethylchlorosilane is observed. The role of hydroxide ion in this reaction is discussed. Convenient syntheses of t-butyl methyl ether and dimethylchloromethoxysilane are reported.     

Structural studies of some body-centered cubic phases of mixed oxides involving Bi2O3: The structures of Bi25FeO40 and Bi38ZnO60

The structures of the compounds initially reported to be 7·Bi₂O₃·ZnO and 96·Bi₂O₃·4Fe₂O₃, have been determined by X ray methods. Three dimensional, absorption corrected diffractometer data were used and atomic parameters were refined by least-squares procedures. The structures are isomorphous, cubic witha = 10.194(3)and10.179(3)A?, respectively, and space group I23. Each Bi³⁺ ion is surrounded by five oxygen atoms that form an incomplete octahedral arrangement with BiO distances ranging from 2.07–2.60A?. The6s²inert electron pair completes the octahedron. The Bi³⁺ ions are vibrating anisotropically. Tetrahedral sites in the structures contain 61 and 46 electrons, respectively. These values are consistent with a statistical distribution of Zn²⁺ and Bi⁵⁺ ions or Fe³⁺ and Bi⁵⁺ ions on these sites. Molar ratios are derived that agree with the observed distributions of electron density and give rise to perfectly stoichiometric systems, devoid of cationic or anionic vacancies. The compositions studied correspond to Bi³⁺₂₄Bi⁵⁺Fe³⁺O₄₀ and Bi³⁺₃₆Bi⁵⁺₂ZnO₆₀ and they are optical enantiomorphs.It is proposed that a reduction in the percentage composition of Bi₂O₅ leads to metastable phases, in which all atomic positions remain fully occupied but some tetrahedral sites contain Bi³⁺ ions. The end product of the series is γ-Bi₂O₃ in which 50% of these sites contain Bi³⁺ and the remainder Bi⁵⁺ ions. We believe that γ-Bi₂O₃ is Bi³⁺₂₅Bi⁵⁺O₄₀.     

Folic acid analogs. Modifications in the benzene-ring region. 5. 2′,6′-diazafolic acid

The synthesis of 2′,6′-diazafolic acid was accomplished by the condensation of 2-acetylamino-4(3H)pteridinone-6-earboxaldehyde (XIV) with diethyl N-[(5-amino-2-pyrimidinyl)carbonyl]-L-glutamate (XIII) followed by reduction of the anil double bond and alkaline hydrolylic cleavage of the N²-acetyl and ethyl ester protecting groups. Intermediate XIII was prepared by starling with 5-nitro-2-styrylpyrimidine (VI) and proceeding via 5-arnino-2-styrylpyrimidine (IX). The henzyloxycarbonyl derivative of IX was prepared and oxidized to the corresponding 5-benzyloxycarbonylaminopyrimidine-2-carboxylic acid (XI). The coupling of XI with diethyl L-glutamate followed by hydrogenolysis of the henzyloxycarbonyl function afforded the desired intermediate XIII. 2′,6′-Diazafolic acid was a potent inhibitor of Streptococcus faecium and displayed marginal activity against leukemia 1,1210 in mice.     

Eine einfache Synthese chiraler Arylbenzochinone und Arylbenzohydrochinone; Versucheines NMR.-Nachweises von Chiralität in isopropylsubstituierten Benzalanilinen

Atropisomeric diphenyls (V and VI) are easily prepared by the acid catalysed condensation of 2-methoxycarbonyl-1,4-benzoquinone and 2-acetyl-1,4-benzoquinone and trimethyl-1,4-benzoquinone respectively with 2-isopropyl-5-methylanisole and 2-isopropyl-3,5dimethylanisole. The reaction is not affected by steric hindrance; the more highly substituted phenols gave better yields. One of the diphenylderivatives has been resolved with help of dehydroabietylamine. Thermodynamic data for the racemisation process have been determined by classical polarimetric techniques (Table 4). The chirality of most of the compounds prepared is easily detected by considering the signals of the diastereotopic isopropyl group in the NMR.-spectrum. Probably because of solvent interaction NMR. kinetics have failed to give information about the racemisation process. Isopropyl-substituted benzal-anilines have been prepared. They did not show any ‘splitting’ of the isopropyl-groups in the NMR.     

L3/L2 white-line intensity ratios in the electron energy-loss spectra of 3d transition-metal oxides

The L₃/L₂ white-line intensity ratio in transition-metal oxides deviates widely from the statistical value of 2 : 1 but shows interesting systematics. In a series of oxides of a given metal, the ratio reaches a maximum for the d⁵ configuration (e.g. MnO) and a minimum for the d⁰ configuration (e.g. KMnO₄). In a series of monoxides, sesquioxides and dioxides of different metals, the ratio is again a maximum at the d⁵ configuration and decreases as the configuration changes towards d⁰ or d¹⁰. Our results, obtained by electron energy-loss spectroscopy, carried out in an electron microscope, are interpreted on an atomic mechanism involving spin-spin coupling. According to this model, the L₂ transition probability decreases in the progression d⁰ to d⁵ whereas the L₃ transition probability decreases beyond d⁵.     

X-ray analysis of the influence of various nucleating agents on the crystallinity of poly-α-butene

The influence of various nucleating agents on the crystallinity of poly-α-butene form I has been studied. The nucleating agents were: adipic acid, salicylic acid, p-aminobenzoic acid, sodium benzoate and sorbic acid; their influences on the lattice parameters, degree of crystallinity, size of crystallites and texture have been examined. The analysis was carried out by wide-angle X-ray diffraction. The relative degrees of crystallinity in poly-α-butene samples containing nucleating agents were measured using the Hermans-Weidinger procedure; in order to obtain the size of crystallites, the Debye-Scherrer method was applied. The lattice parameters show no change but the relative degree of crystallinity, the size of crystallites and their texture depend on the nucleating agent used.