Limitations of low resolution mass spectrometry in the electron capture negative ionization mode for the analysis of short- and medium-chain chlorinated paraffins

The analysis of complex mixtures of chlorinated paraffins (CPs) with short (SCCPs, C₁₀–C₁₃) and medium (MCCPs, C₁₄–C₁₇) chain lengths can be disturbed by mass overlap, if low resolution mass spectrometry (LRMS) in the electron capture negative ionization mode is employed. This is caused by CP congeners with the same nominal mass, but with five carbon atoms more and two chlorine atoms less; for example C₁₁H₁₇³⁷Cl³⁵Cl₆ (m/z 395.9) and C₁₆H₂₉³⁵Cl₅ (m/z 396.1). This can lead to an overestimation of congener group quantity and/or of total CP concentration. The magnitude of this interference was studied by evaluating the change after mixing a SCCP standard and a MCCP standard 1+1 (S+MCCP mixture) and comparing it to the single standards. A quantification of the less abundant C₁₆ and C₁₇ congeners present in the MCCP standard was not possible due to interference from the major C₁₁ and C₁₂ congeners in the SCCPs. Also, signals for SCCPs (C₁₀–C₁₂) with nine and ten chlorine atoms were mimicked by MCCPs (C₁₅–C₁₇) with seven and eight chlorine atoms (for instance C₁₀H₁₂Cl₁₀ by C₁₅H₂₄Cl₈). A similar observation was made for signals from C₁₅–C₁₇ CPs with four and five chlorine atoms resulting from SCCPs (C₁₀–C₁₂) with six and seven chlorine atoms (such as C₁₅H₂₈Cl₄ by C₁₀H₁₆Cl₆) in the S+MCCP mixture. It could be shown that the quantification of the most abundant congeners (C₁₁–C₁₄) is not affected by any interference. The determination of C₁₀ and C₁₅ congeners is partly disturbed, but this can be detected by investigating isotope ratios, retention time ranges and the shapes of the CP signals. Also, lower chlorinated compounds forming [M+Cl]^– as the most abundant ion instead of [M-Cl]^– are especially sensitive to systematic errors caused by superposition of ions of different composition and the same nominal mass.     

Determination of Dopamine in the Presence of Ascorbic Acid Using a Poly(Amidosulfonic Acid) Modified Glassy Carbon Electrode

A glassy carbon electrode (GCE) was modified with electropolymerized films of amidosulfonic acid in pH 7.0 phosphate buffer solution (PBS) by cyclic voltammetry (CV). The modified electrode showed an excellent electrocatalytical effect on the oxidation of dopamine (DA). In pH 7.0 PBS, the anodic peak current increased linearly with the concentration of DA in the range of 5.0×10^–7 1.0×10^–4moldm^–3, with a correlation coefficient of 0.9932, and a detection limit (S/N=3) of 1.0× 10^–7moldm^–3. The relative standard deviation of 10 successive scans was 2.5% for 1.0×10^–6moldm^–3 DA. The interference of ascorbic acid (AA) with the determination of DA could be eliminated because of the very distinct attracting interaction between DA cations and the negatively poly(amidosulfonic acid) film in pH 7.0 PBS. The proposed method exhibited good recovery and reproducibility.     

Structures and anion-binding properties of M4L6 tetrahedral cage complexes with large central cavities

Reaction of the bis-bidentate bridging ligand L(3), in which two bidentate chelating 3(2-pyridyl)pyrazole units are separated by a 3,3'-biphenyl spacer, with Co(II) salts affords tetranuclear cage complexes of composition [Co(4)(L(3))(6)]X(8)(X =[BF(4)](-), [ClO(4)](-), [PF(6)](-) or I(-)) in which four 6-coordinate Co(II) ions in an approximately tetrahedral array are connected by six bis-bidentate bridging ligands, one spanning each of the six edges of the Co(4) tetrahedron. In every case, X-ray crystallography reveals that the 'apical' Co(II) ion has a fac tris-chelate geometry, whereas the other three Co(II) ions have mer tris-chelate geometries, resulting in (non-crystallographic)C(3) symmetry for the cages; that this structure is retained in solution is confirmed by (1)H NMR spectroscopy of the paramagnetic cages. In every case one of the anions is located inside the central cavity of the cage, with the remaining seven outside. We found no clear evidence for an anion-based templating effect. The cage superstructure is sufficiently large to leave gaps in the centres of the faces through which the internal and external anions can exchange. Variable-temperature (19)F NMR spectroscopy was used to investigate the dynamic behaviour of the cages with X =[BF(4)](-) and [PF(6)](-) in MeCN solution: in both cases two separate signals, corresponding to external and internal anions, are clear at 233 K which have coalesced to a single signal at room temperature. Analysis of the linewidth of the minor signal (for the internal anion) at various temperatures below coalescence gave an activation energy for anion exchange of ca. 50 kJ mol(-1) in each case, a figure which suggests that anion exchange can occur via a conformational rearrangement of the cage superstructure in solution rather than opening of the cavity by cleavage of metal-ligand bonds.     

Modification of catalytic adsorptive stripping voltammetric method of hexavalent chromium determination in the presence of DTPA and nitrate

The voltammetric procedure for determination of traces of Cr(VI) [Anal. Chim. Acta (1992) 262:103] was modified by changing the temperature of the measurements. It was found that at the temperature of 40 °C the time of decrease of the Cr(III) signal was shortened from 30 to 5 min. As a result the total analysis time was drastically shortened. The modified procedure does not show any disadvantage as compared to the original method. The results of Cr(VI) determination by the modified procedure are less affected by Cr(III) as compared to the original method. The detection limit of the method was 2.5 × 10^-11 mol L^-1 (1.2 ng L^-1). The validation of the modified procedure was performed by comparison of the results of analyses of tap and river water samples with those obtained using original procedure.     

Measurement uncertainty and the use of reference materials

The use of (certified) reference materials and quality control materials can form a suitable basis for evaluating measurement uncertainty of routine measurements. In particular when these materials are used for quality control purposes, it is not always evident how the quality control data can be used in the uncertainty budget of a routine measurement. Current guidance documents on the evaluation of measurement uncertainty and the use of reference materials treat this subject only in part, or in very generic terms. ISO/REMCO has established a new working group that will provide practical guidance and examples on how to use quality control data in the evaluation of measurement uncertainty. A short introduction to the subject is given.

Mechanistic study of osmium(VIII) promoted oxidation of crotonic acid by aqueous alkaline solution of potassium bromate

Kinetics and mechanism of the Os(VIII) catalysed oxidation of crotonic acid (CA) by KBrO₃ in alkaline medium have been investigated. Zero order dependence in [KBrO₃] was observed, while first order with respect to CA in its lower concentration range tends to zero order at its higher concentration range. The order in [Os(VIII)] was found to be unity and a positive effect of [OH⁻] was observed. Variation of the ionic strength (μ) and dielectric constant of the medium and addition of Hg(OAc)₂ (used as Br⁻ scavenger) had an insignificant effect on the rate of reaction. Thermodynamic parameters have also been calculated and reported. A suitable mechanism consistent with the observed kinetic results has been suggested and the related rate law deduced.     

Stacking due to ionic transport number mismatch during sample sweeping on microchips

Sample stacking can occur in isoconductive buffer systems as a result of ion transport mismatches that cause changes in buffer conductivity during electrophoresis. Fluorescence imaging was used to examine this effect in the sweeping of hydrophobic dyes with sodium dodecyl sulfate (SDS) on microchips. Imaging revealed the occurrence of a stacking effect in a sodium borate buffer system in which the sample buffer and SDS-containing run buffer had the same initial conductivity. Injected sample plugs were first swept by SDS micelles and the swept band was then stacked at the trailing end of the sample zone. This effect is due to changes in conductivity at both the front and back interfaces of the injected sample plug and can be modeled by moving boundary equations. Maximum signal enhancements of 86-, 160- and 560-fold were obtained for Rhodamine 560, Rhodamine B and Rhodamine 6G, respectively, by the combination of sweeping and stacking within a 1 cm section of microchannel. Based on sample sweeping/stacking and manipulation of the electric field polarity, a method of trapping and concentrating analyte from multiple injections was also demonstrated.     

Structural characterization of cardiolipin by tandem quadrupole and multiple-stage quadrupole ion-trap mass spectrometry with electrospray ionization

We report negative-ion electrospray tandem mass spectrometric methods for structural characterization of cardiolipin (CL), a four-acyl-chain phospholipid containing two distinct phosphatidyl moieties, of which structural assignment of the fatty acid residues attached to the glycerol backbones performed by low-energy CAD tandem mass spectrometry has not been previously described. The low-energy MS2-spectra of the [M - H]- and [M - 2H]2- ions obtained with ion-trap or with tandem quadrupole instrument combined with ion-trap MS3-spectra or with source CAD product-ion spectra provide complete structural information for CL characterization. The MS2-spectra of the [M - H]- ions contain two sets of prominent fragment ions that comprise a phosphatidic acid, a dehydrated phosphatidylglycerol, and a (phosphatidic acid + 136) anion. The substantial differences in the abundances of the two distinct phosphatidic anions observed in the MS2-spectra of the [M -H]- ions lead to the assignment of the phosphatidyl moieties attached to the 1' or 3' position of central glycerol. Upon further collisional dissociation, the MS3-spectra of the phosphatidic anions provide information to identify the fatty acyl substituents and their position in the glycerol backbone. The MS2-spectra of the [M - 2H]2- ions obtained with TSQ or ITMS contain complementary information to confirm structural assignment. The applications of the above methods in the differentiation of cardiolipin isomers and in the identification of complex cardiolipin species consisting of multiple molecular structures are also demonstrated.     

Structure activity relationship by NMR and by computer: a comparative study

There has recently been considerable interest in using NMR spectroscopy to identify ligand binding sites of macromolecules. In particular, a modular approach has been put forward by Fesik et al. (Shuker, S. B.; Hajduk, P. J.; Meadows, R. P.; Fesik, S. W. Science 1996, 274, 1531-1534) in which small ligands that bind to a particular target are identified in a first round of screening and subsequently linked together to form ligands of higher affinity. Similar strategies have also been proposed for in silico drug design, where the binding sites of small chemical groups are identified, and complete ligands are subsequently assembled from different groups that have favorable interactions with the macromolecular target. In this paper, we compare experimental and computational results on a selected target (FKBP12). The binding sites of three small ligands ((2S)1-acetylprolinemethylester, 1-formylpiperidine, 1-piperidinecarboxamide) in FKBP12 were identified independently by NMR and by computational methods. The subsequent comparison of the experimental and computational data showed that the computational method identified and ranked favorably ligand positions that satisfy the experimental NOE constraints.     

Evidence for unfolding and refolding of gas-phase cytochrome <Emphasis Type="Italic">c</Emphasis> ions in a Paul trap

The folding pathways of gas-phase cytochrome c ions produced by electrospray ionization have been studied by an ion trapping/ion mobility technique that allows conformations to be examined over extended timescales (10 ms to 10 s). The results show that the +9 charge state emerges from solution as a compact structure and then rapidly unfolds into several substantially more open structures, a transition that requires 30-60 ms; over substantially longer timescales (250 ms to 10 s) elongated states appear to refold into an array of folded structures. The new folded states are less compact than those that are apparent during the initial unfolding. Apparently, unfolding to highly open conformations is a key step that must occur before +9 ions can sample more compact states that are stable at longer times.