Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

Packing Non-Zero A-Paths In Group-Labelled Graphs

Let G=(V,E) be an oriented graph whose edges are labelled by the elements of a group Γ and let A⊂V. An A-path is a path whose ends are both in A. The weight of a path P in G is the sum of the group values on forward oriented arcs minus the sum of the backward oriented arcs in P. (If Γ is not abelian, we sum the labels in their order along the path.) We are interested in the maximum number of vertex-disjoint A-paths each of non-zero weight. When A = V this problem is equivalent to the maximum matching problem. The general case also includes Mader's S-paths problem. We prove that for any positive integer k, either there are k vertex-disjoint A-paths each of non-zero weight, or there is a set of at most 2k −2 vertices that meets each of the non-zero A-paths. This result is obtained as a consequence of an exact min-max theorem. These results were obtained at a workshop on Structural Graph Theory at the PIMS Institute in Vancouver, Canada. This research was partially conducted during the period the first author served as a Clay Mathematics Institute Long-Term Prize Fellow.     

Experimental identification of physical parameters of fluid-filled pipes using acoustical signal processing

A method is formulated for the identification of an unknown physical parameter of a fluid-filled pipe using the measurement of sound speed in the pipe. The method uses a simple formula which provides the relationship between the sound speed and a few physical parameters of the pipe: thickness, diameter, wall material constants and fluid constants. Once the sound speed in the pipe is measured, the simple formula can be used to extract one of the unknown parameters providing the remaining ones are known.The sound speed in the pipe is measured using a 3-transducer array. In order to demonstrate the potential of the technique the results of several measurements obtained in a water-filled steel pipe are presented.The required accuracy of the measurement of sound speed and of the specification of known parameters is analysed. The accuracy depends on the unknown parameter which is to be identified. For example, if the pipe thickness is the unknown parameter, the other parameters have to be known within a very narrow margin of error. On the contrary, if the fluid properties have to be identified the needed accuracy of known parameters gets much lower.     

A note on the Σ1 spectrum of a theory

Let T be a suitable system of classical set theory. We will show, that the Σ₁ spectrum of T, i.e. the set of ordinals having good Σ₁ definition in T is an initial segment of the ordinals. Received: 11 October 1999 / Published online: 12 December 2001     

Codes with a Certain Weight-preserving Transitive Group of Automorphisms

We determine all linear codes C containing the constant code E, for which there is a weight-preserving group of semilinear automorphisms which acts transitively on the set of nontrivial cosets of E in C. Michael Giudici - The author holds an Australian Postdoctoral Fellowship.     

An efficient electrophilic N-amination utilizing in situ generated chloramine under phase transfer conditions

An efficient, one-pot, phase transfer N-amination technology was developed. The protocol utilizes chloramine, an inexpensive and safe electrophilic aminating agent potentially viable for commercial manufacturing.     

On-line arbitrarily vertex decomposable trees

A tree T is arbitrarily vertex decomposable if for any sequence τ of positive integers adding up to the order of T there is a sequence of vertex-disjoint subtrees of T whose orders are given by τ. An on-line version of the problem of characterizing arbitrarily vertex decomposable trees is completely solved here.     

Cochains and homotopy type

Finite type nilpotent spaces are weakly equivalent if and only if their singular cochains are quasi-isomorphic as E_∞ algebras. The cochain functor from the homotopy category of finite type nilpotent spaces to the homotopy category of E_∞ algebras is faithful but not full.     

Formation of functional groups on graphite during oxygen plasma treatment

Improved sample wettability was obtained by oxygen plasma functionalization of pyrolytic graphite. The samples were exposed to highly dissociated oxygen plasma with the density of 1 × 10¹⁶ m⁻³, the electron temperature of about 5.5 eV and the density of neutral oxygen atoms of 8 × 10²¹ m⁻³ for 20 s. The surface wettability was measured by a contact angle of water drop. The contact angle dropped from original 112° down to about 1°. The functional groups were detected by XPS analyses. The survey spectrum showed a substantial increase of oxygen concentration on the surface, while high-resolution analyses showed additional oxygen was bonded onto the graphite surface in the form of C-O polar functional group responsible for the increase of the surface energy.     

Students’ Reasoning About One-Object Stochastic Phenomena in an ICT-Environment

This paper focuses on the different ways in which students in lower secondary school (14–16 year olds) experience compound random events, presented to them in the form of combined junctions. A carefully designed ICT environment was developed enabling the students to interact with different representations of such structures. Data for the analysis was gathered from two interview sessions. The analysis of the interaction is based on constructivist principles on learning; i.e. we adopted a student-oriented perspective, taking into consideration the different ways students try to make sense of chance encounters. Our results show how some students give priority to geometrical and physical concerns, and we discuss how seeking causal explanations of random phenomena may have encouraged this. With respect to numerically oriented models a division strategy appears to stand out as the preferred one.