Investigation of an enantioselective non-aqueous capillary electrochromatography system applied to the separation of chiral acids

A weak anion-exchange type chiral stationary phase (CSP) based on tert.-butylcarbamoylquinine as chiral selector and silica as chromatographic support was applied to non-aqueous capillary electrochromatography. The mobile phases used consisted of acetonitrile and methanol as organic solvents, and acetic acid and triethylamine were added as background electrolytes. The influence of several experimental parameters (electrolyte concentration, acetic acid-triethylamine ratio, acetonitrile-methanol ratio and temperature) was evaluated in order to obtain improved enantioselectivity and efficiency as well as short run times for the enantiomeric separation of negatively charged chiral analytes including benzyloxycarbonyl, N-(3,5-dinitrobenzyloxycarbonyl, 9-fluorenylmethoxycarbonyl, benzoyl, acetyl and N-(2,4-dinitrophenyl) derivatized amino acids and profens. Solvent composition of acetonitrile-methanol (80:20) and enhanced electrolyte concentrations up to 600 mM acetic acid at a constant acid-base ratio of 100:1 with high applied voltages of -25 kV proved to be optimum regarding short retention times and improved efficiencies. For example, the enantiomers of Fmoc-Leu could be separated in less than 10 min with a resolution factor of 6.9 and about 100000 theoretical plates per meter.     

Structure-driven design and synthesis of chiral dioxocyclam derivatives

Based on an analysis of previously reported structures and a potential geometry fit with substrates, a new family of chiral dioxocyclam derivatives have been designed. The synthesis of those ligands was accomplished starting from l-proline and α-d-amino acids (converted to β-amino acids) with a key step of macrocyclization reaction of amino esters. All ligands were converted into neutral copper(II) complexes (amide groups underwent deprotonation of upon treatment of ligands with copper(II) acetate). The complexes exhibit the desired shape of their active surfaces, as proved by X-ray analysis.     

Calculations of substituent and solvent effects on the kinetic isotope effects of Menshutkin reactions

Nitrogen, deuterium, halogen, and carbon kinetic isotope effects have been modeled for the Menshutkin reaction between methyl halides and substituted N,N-dimethylaniline at the HF/6-31G(d) level of theory augmented by the C-PCM continuum solvent model for several solvents. Systematic changes in geometries of the transition states and Gibbs free energies of activation have been found with phenyl ring substituents, solvent, and the leaving group. Kinetic isotope effects also change systematically; however, these changes are predicted to be small, inside the usual precision of the experimental measurements. On the contrary, no correlation has been found between the kinetic isotope effects and the Hammett constants for para substituents. Thus opposite to previous assumptions, our results indicate that kinetic isotope effects on the Menshutkin reaction cannot be used to predict the position of the transition state on the reaction coordinate.     

Morphology and photocatalytic activity of TiO2 Aerogels

In this paper we describe a methodology to form a data base that will allow us to investigate the correlation between the morphology of Ti?₂ aerogels and their photocatalytic activity with respect to photodecomposition of a water soluble organic compound. We start with a qualitative theoretical argument in which we show that any functionality that involves optimization of different length scale should require some kind of ramified structure. For photocatalytic activity we need to optimize substrate and light absorptions with diffusion of products and reactants. We proceed to describe the techniques that we use to analyze and parametrize the morphology of the aerogels, using nitrogen adsorption and Small Angle Neutron Scattering. The photocatalytic activity is monitored through the photodecomposition of salicylic acid. We compare the adsorption and photodegradation of salicylic acid on the aerogels to many other forms of TiO₂ and report that under our experimental conditions the photocatalytic activity of the aerogels is superior.     

Enhancement of dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal mixture by dispersing nano-sized copper oxide

ABSTRACT

Here, we present the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal (FLC) mixture, namely W302. The FLC mixture, comprising of pyrimidine compounds, was characterised through dielectric spectroscopy, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and other electro-optical methods. The material parameters such as spontaneous polarisation, rotational viscosity, response time and tilt angle of W302 were found to be 14 nC/cm², 240 mPa.s, 150 µs and 28^?, respectively. The phase transition temperatures of W302 were observed through DSC and further confirmed by the dependence of dielectric loss factor in homogeneously aligned FLC sample with temperature. We also demonstrate the observance of a low-frequency dielectric relaxation mode due to the unwinding of the helix, called as partially unwound helical mode (p-UHM) along with Goldstone mode. The behaviour of p-UHM has been systematically studied with temperature and applied bias field. Further, dispersion of nCuO into host W302 has shown a significant increase in dielectric permittivity. Also, the p-UHM relaxation peak in the dielectric regime has disappeared with the incorporation of nCuO. These studies would be useful to fabricate better electro-optical devices for display, switching and beam steering applications. The formulation and characterization of a ferroelectric liquid crystal (FLC) mixture W302 composed of pyrimidine compounds is presented. Then, we observed the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared and characterized FLC mixture.     

Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.

     

Chiral anion exchangers applied to capillary electrochromatography enantioseparation of oppositely charged chiral analytes: investigation of stationary and mobile phase parameters

Weak anion-exchange (WAX) type chiral stationary phases (CSPs) based on tert.-butyl carbamoyl quinine as chiral selector (SO) and different types of silica particles (porous and non-porous) as chromatographic support are evaluated in packed capillary electrochromatography (CEC). Their ability to resolve the enantiomers of negatively charged chiral analytes, e.g., N-derivatized amino acids, in the anion-exchange mode and their electrochromatographic characteristics are described in dependence of several mobile phase parameters (pH, buffer type and concentration, organic modifier type and concentration) and other experimental variables (electric field strength, capillary temperature). The inherent "zwitterionic" surface character of such silica-based WAX type CSPs (positively charged SO and negatively charged residual silanols) allows the reversal of the electroosmotic flow (EOF) towards the anode at pH values below the isoelectric point (pI) of the modified surface, whereas a cathodic EOF results at pH values above the pI. Since for negatively charged analytes also an electrophoretic transport increment has to be considered, which can be either in or against the EOF direction, several distinct modes of elution have been observed under different stationary phase and mobile phase conditions: (i) co-electrophoretic elution of the negatively charged solutes with the anodic EOF in the negative polarity mode, (ii) counter-electrophoretic elution with the cathodic EOF in the positive polarity mode, and (iii) electrophoretically dominated elution in the negative polarity mode with a cathodic EOF directed to the injection end of the capillary. Useful enantioseparations of chiral acids have been obtained with all three modes. Enantioselectivity values as high as under pressure-driven conditions and theoretical plate numbers up to 120000 per meter could be achieved under electrically driven conditions. A repeatability study yielded RSD values below 2% for retention times and RSD values in the range of 5-10% for theoretical plate numbers and resolution, thus clearly establishing the reliability of the investigated anion-exchange type CEC enantioseparation methods.     

Bond energy, aromatic stabilization energy and strain in IPR fullerenes

Various models applied to DFT structures and energies of 2-D and 3-D aromatic molecules shed new light on the effects of strain and aromaticity in these systems. The cyclic pi electron delocalisation does not stabilize the fullerene C60 formation; and 5-6 and 6-6 CC bonds have near-identical bond stretch potentials.     

α-phosphoryl sulfoxides. X. A general synthesis of optically active α-chlorovinyl sulfoxides

A general and efficient synthesis of enantiomeric α-chlorovinyl p-tolyl sulfoxides 1 using (+)-(S)_C(S)_S-α-chloro-α-dimethoxyphosphorylmethyl p-tolyl sulfoxide as a key substrate for the Horner-Wittig reaction with carbonyl compounds is described. The ratio of geometrical isomers of 1 was determined and briefly investigated. The X-ray diffraction structures of (Z)-1-chloro-1-p-tolylsulfinyl-2-phenyl-ethene and (Z)-1-chloro-1-p-tolylsulfinyl-2-(2-thienyl)-ethene are reported.     

Electron collisions with trifluorides: BF3 and PF3 molecules

Absolute total cross sections (TCSs) for electron scattering from boron trifluoride (BF(3)) and phosphorus trifluoride (PF(3)) molecules have been measured using a linear transmission method. The electron energy ranges from 0.6 to 370 eV for BF(3) and from 0.5 to 370 eV for PF(3). The TCS energy dependence for BF(3) exhibits two very pronounced enhancements: resonantlike narrow feature located near 3.6 eV with the maximum value of 19.2 x 10(-20) m(2), and intermediate energy very broad enhancement with two humps, one centered around 21 eV (18.8 x 10(-20) m(2) in the maximum) and the other near 45 eV (19.5 x 10(-20) m(2)). For PF(3) the TCS has quite different low-energy dependence: at 0.5 eV it has a high value of 70 x 10(-20) m(2) and decreases steeply towards higher energies. Beyond the minimum near 5.5 eV, the TCS reveals two distinct humps: the resonant one centered near 11 eV with the peak value of 32.9 x 10(-20) m(2) and the second one much broader around 35 eV (27.9 x 10(-20) m(2)). The present TCSs for trifluorides are compared to each other as well as to previous TCS data for selected perfluorides and to results for their perhydrided counterparts. The differences and similarities in the shape and magnitude of TCSs are pointed out.