pH gradient high-performance liquid chromatography: theory and applications

pH gradient high-performance liquid chromatography (HPLC) is a method of reversed-phase high-performance liquid chromatography suitable for ionogenic substances. It consists in programmed increase during the chromatographic process of the eluting strength of eluent with respect to the analytes separated. On the analogy of the conventional organic modifier gradient reversed-phase HPLC, in the pH gradient approach the eluting strength of the mobile phase increases due to its changing pH: increasing in case of acids or decreasing in case of bases. At the same time the content of organic modifier remains constant. A theory of the pH gradient HPLC has been elaborated. The resulting mathematical model is easily manageable. Its ability to predict changes in retention and separation of analytes following the changes in chromatographic conditions is demonstrated. The pH gradient method is uniquely suitable to determine pKa values of analytes. An equation is presented allowing to calculate pKa values basing on appropriate retention data. The effects on pKa are discussed of the concentration of methanol in the mobile phase. The RP HPLC-derived pKa data correlate to the reference pKa values (w(w)pKa) but are not identical. That may be explained by the effects on the chromatographically determined pKa of the specific interactions of analytes with stationary phases. The proposed pH gradient RP HPLC procedure offers a fast and convenient means to get comparable acidity parameters for larger series of compounds, like drug candidates, also when the analytes are available only in minute amounts and/or as complex mixtures.     

Sodium diffusion through amorphous silica surfaces: a molecular dynamics study

We have studied the diffusion inside the silica network of sodium atoms initially located outside the surfaces of an amorphous silica film. We have focused our attention on structural and dynamical quantities, and we have found that the local environment of the sodium atoms is close to the local environment of the sodium atoms inside bulk sodo-silicate glasses obtained by quench. This is in agreement with recent experimental results.     

Flow-injection chemiluminescence determination of epinephrine in pharmaceutical preparations using raw apple juice as enzyme source

Raw apple juice exhibits the activity of polyphenol oxidase which can be employed for the determination of mono-, di- and polyhydric phenols. The chemiluminescence detection in the two-channel manifold was used to develop the new procedure for determination of epinephrine. Epinephrine can be determined by this method in pharmaceutical preparations in concentration ranges 1.0–10.0 and 10.0–25.0 mg l⁻¹, with a detection limit of 0.2 mg l⁻¹. Good selectivity against typical antioxidants and other coexisting substances was achieved. Relatively slow loss of the enzyme activity was observed during 1 week. The proposed method is very simple. Fresh juice solution from one apple can be prepared in 10 min and used for at least 8 h with excellent precision. Consumption of luminol solution was 0.15 ml min⁻¹. The throughput was 20 samples per hour.     

Facts and artifacts about aromatic stability estimation

The stability of a set of 105 five-membered π-electron systems (involving aromatic, non-aromatic and anti-aromatic species) was evaluated using six isodesmic reactions of which two belong to the subclass of homodesmotic reactions, which are based on cyclic and acyclic reference systems. We demonstrate that the ‘Resonance Energies’ derived from isodesmotic schemes have obvious flaws and do not correct or cancel other contributions to the energy, such as the changes of hybridization, homoconjugation of heterosubstituted cyclopentadienes, conjugative interactions of CC or CX (X=N or P) with a π or pseudo π orbital at Y (Y=O, S, NH, PH), strain, etc. as effectively as possible. Likewise, ‘aromatic stabilization energies (ASE)’ derived from homodesmotic schemes based on the acyclic reference compounds do not give satisfactory results. We strongly recommend that only cyclic reference compounds should be used for ASE and other aromaticity evaluations. The analysis is based on ab initio optimized geometries at B3LYP/6-311+G^∗∗.     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Temperature influence on hydrogen sorption in palladium limited-volume electrodes (Pd-LVE)

The effect of temperature on hydrogen and deuterium electrosorption into a palladium LVE (limited-volume electrode) has been investigated. A decrease in hydrogen capacity (H/Pd ratio) with increasing temperature has been observed. Temperature strongly influences the plots of measured H(D)/Pd values vs. potential scan rate. In addition, hydrogen absorption was found to be dependent on the composition of the surrounding electrolyte solution. These results have confirmed the hypothesis that two different mechanisms of hydrogen desorption from the palladium electrode take place, namely electrochemical oxidation and non-electrochemical recombination. Further, the ratio between the rate constants for these two processes has been found to change with temperature. Electronic Publication     

Second-order Green's function calculations of the ionization potential of a (H2)7 chain embedded in a homogeneous electric field

Summary The vertical ionization potential and the related pole strength of a model alternant chain of 14 hydrogen atoms subject to a homogeneous electric field, parallel to the chain and of increasing intensity are calculated, in the framework of a 6–31G** basis set, at the second-order level of the many-body Green's function theory. Trends observed with orbital relaxation, pair removal and pair relaxation effects are interpreted in terms of deformations of the electron density.     

Structure-driven design and synthesis of chiral dioxocyclam derivatives

Based on an analysis of previously reported structures and a potential geometry fit with substrates, a new family of chiral dioxocyclam derivatives have been designed. The synthesis of those ligands was accomplished starting from l-proline and α-d-amino acids (converted to β-amino acids) with a key step of macrocyclization reaction of amino esters. All ligands were converted into neutral copper(II) complexes (amide groups underwent deprotonation of upon treatment of ligands with copper(II) acetate). The complexes exhibit the desired shape of their active surfaces, as proved by X-ray analysis.     

Calculations of substituent and solvent effects on the kinetic isotope effects of Menshutkin reactions

Nitrogen, deuterium, halogen, and carbon kinetic isotope effects have been modeled for the Menshutkin reaction between methyl halides and substituted N,N-dimethylaniline at the HF/6-31G(d) level of theory augmented by the C-PCM continuum solvent model for several solvents. Systematic changes in geometries of the transition states and Gibbs free energies of activation have been found with phenyl ring substituents, solvent, and the leaving group. Kinetic isotope effects also change systematically; however, these changes are predicted to be small, inside the usual precision of the experimental measurements. On the contrary, no correlation has been found between the kinetic isotope effects and the Hammett constants for para substituents. Thus opposite to previous assumptions, our results indicate that kinetic isotope effects on the Menshutkin reaction cannot be used to predict the position of the transition state on the reaction coordinate.