[{Cu(phen)2}(μ‐malato){Cu(phen)(NO3)}](NO3)·4H2O: malate acting as a tetra­dentate and dibridging ligand in a dinuclear copper complex

The crystal structure of the title compound, μ‐2‐hydroxy­butane­dioato‐1κ²O⁴,O^4′:2κ³O¹,O²,O⁴‐nitrato‐2κO‐tris­(1,10‐phen­anthroline)‐1κ⁴N,N′;2κ²N,N′‐dicopper(II) nitrate tetra­hydrate, [Cu₂(C₄H₃O₅)(NO₃)(C₁₂H₈N₂)₃](NO₃)·4H₂O, contains an unsymmetrical dinuclear copper complex with Cu(phen)₂ and Cu(phen)(NO₃) moieties (phen is 1,10‐phenanthroline) bridged by a malate (2‐hydroxy­butane­dioate) ligand, which acts as a double‐bridging and tetra­dentate ligand. As a result of this double‐bridging action, especially the direct coordination of the O atom of one carboxyl­ate group of malate to the two Cu atoms, the Cu⋯Cu distance is only 4.199 (1) Å and the two phen planes are roughly parallel [the shortest inter­planar distance is 3.28 (1) Å], exhibiting an obvious intra­molecular π–π stacking inter­action.     

Micellar Liquid Chromatography Study of Quantitative Retention–Activity Relationships for Antihypertensive Drugs

Use of micellar mobile phases in reversed-phase liquid chromatography (RPLC) results in hydrophobic and electrostatic sites for interaction. Modified stationary phases in micellar liquid chromatography (MLC) are structurally similar to biomembranes. To confirm this we focused on the effects of the type and concentration of surfactant (Brij 35, SDS, and CTAB) and mobile phase pH on the retention of antihypertensive drugs on modified C₁₈ stationary phases. Quantitative retention-activity relationships are proposed for the drugs and the different surfactants and compared with those obtained using aqueous–organic mobile phases. Finally, a correlation was obtained between the logarithm of retention factors (log k) and the toxicity (LD₅₀) of antihypertensive drugs. Revised: 14 September 2005 and 4 April 2006     

A Novel Dinuclear Nickel(II) Complex with Three Bridges of Cl–, OAc– and (‐OCH2CH2O‐) Group of N,N, N′, N′‐Tetrakis(2‐benzimidazolyl methyl‐1, 4‐di‐ethylene amino) Glycol Ether

The novel dinuclear Ni²⁺ complex [Ni₂(μ‐Cl)(μ‐OAc) (EGTB)]·Cl·ClO₄·2CH₃OH, where EGTB is N, N, N′, N′‐tetrakis (2‐benzimidazolyl methyl‐1, 4‐di‐ethylene amino)glycol ether, crystallizes in the orthorhombic space group Pnma with a = 15.272(2), b = 14.768(2), c = 22.486(3) Å, V = 5071.4(12) ų, Z = 4, D_calc = 1.414 g cm^?3, and is bridged by triply bridging agents of a chloride ion, an acetate and an intra‐ligand (‐OCH₂CH₂O‐) group. The nickel coordination geometry is that of a slightly distorted octahedron with a NiN₃O₂Cl arrangement of the ligand donor atoms. The Ni–Cl distance is 2.361(2) Å, and two Ni–O distances are 1.996(5) and 2.279(6) Å. The three Ni–N distances are 2.033(7), 2.060(6), and 2.166(6) Å with the Ni–N bond trans to an ether oxygen the shortest, the Ni–N bond trans to an acetate oxygen the middle and the Ni–N bond trans to Cl the longest.     

An unusual chain cadmium(II) coordination polymer: catena‐poly[[(2,2′‐bipyridyl‐κ2N,N′)cadmium(II)]‐di‐μ‐chlorido‐[(2,2′‐bipyridyl‐κ2N,N′)cadmium(II)]‐di‐μ‐thiocyanato‐κ2N:S;κ2S:N]

The title complex, [CdCl(NCS)(C₁₀H₈N₂)]_n, represents an unusual Cd^II coordination polymer constructed by two types of anionic bridges and 2,2′‐bipyridyl (bipy) terminal ligands. These two types of bridges are arranged around inversion centers. The distorted octahedral coordination of the Cd^II center is provided by two chloride ions, one N‐ and one S‐donor atom from two thiocyanate ions, and a pair of N atoms from the chelating bipy ligand. Interestingly, adjacent Cd^II ions are interconnected alternately by paired chloride [Cd...Cd = 3.916 (1) Å] and thiocyanate bridges [Cd...Cd = 5.936 (1) Å] to generate an infinite one‐dimensional coordination chain. Furthermore, weak interchain C—H...S interactions between the bipy components and thiocyanate ions lead to the formation of a layered supramolecular structure.     

Langmuir monolayers of the long-chain alkyl derivatives of a nucleoside analogue and the formation of self-assembled nanoparticles

The long-chain alkyl derivatives of a nucleoside analogue-acyclovir were prepared in the paper. One is stearyl-glycero-succinyl-acyclovir (SGSA) with a single 18-carbon length (C18) alkyl chain. Another is dioctadecyl-aspartate-succinyl-acyclovir (DASA) with double C18 alkyl chains. They were prepared by the esterification of succinyl-acyclovir with the lipids, and sodium salts of them were also prepared. Guanine moieties and alkyl moieties bring the derivatives intermolecular hydrogen bonding and hydrophobic interaction in water separately. The forces are influenced by the number of alkyl chains and the charged state, and determine the solubility and the self-assembly behavior of the derivatives. The double alkyl-chain derivatives (DASA and DASA-Na) formed rigid Langmuir monolayers on air/water surface, while the single alkyl chain derivatives (SGSA and SGSA-Na) did not. However, cholesterol (Chol) could assist SGSA to form rigid monolayers through inserting into the alkyl chains of SGSA to mimic the second alkyl chain. SGSA self-aggregates in water were prepared by the injection method with tetrahydrofuran as solvent. Cuboid-like shape and nanoscale size demonstrated that SGSA self-aggregates were self-assembled nanoparticles. Shape, particle size, zeta potential and phase transition of the nanoparticles were characterized. And they showed an average size of 83.2 nm, a negative surface charge of -31.3-mV zeta potential and a gel-liquid crystalline phase transition of 50.38 degrees C. The formation mechanism of self-assembled nanoparticles was analyzed. Hydrophobic interaction of alkyl chains improves SGSA molecules to form bilayers, and then cuboid-like nanoparticles were obtained by layer-by-layer aggregation based on inter-bilayers hydrogen bonding. However, the charged guanine moieties make SGSA-Na lose the function of hydrogen bonding so that SGSA-Na only forms vesicles in water based on hydrophobic interaction. Strong hydrophobicity and wide-open rigid double alkyl chains of DASA and DASA-Na restrict self-assembly in water media, and no homogeneous suspensions were obtained. Therefore, the molecular self-assembly behavior of the long-chain alkyl derivatives of nucleoside analogues on water surface or in water media is determined by the number of alkyl chains and the charged state.     

Simultaneous Determination of Glyphosate,Glufosinate, and Aminomethylphosphonic Acid by Capillary Electrophoresis After 9‐Fluorenylmethyl Chloroformate Derivatization

A capillary electrophoresis (CE) with UV absorption detection method is described for the simultaneous determination of glufosinate, glyphosate, and aminomethylphosphoric acid. The 9‐fluorenylmethyl chloroformate (FMOC‐Cl) was used for precolumn derivatization of the non‐absorbing herbicides. The three analytes were separated by CE in 9 min with 25 mM borate buffer at pH 9, followed by detection with a UV detector at 260 nm. We demonstrate how the detection limit can be enhanced by using acetonitrile‐salt mixtures. With acetonitrile‐salt mixtures, the limit of detection (LOD) was in the 10^?7 M range. Linearity of more than two orders of magnitude was generally obtained. Precisions of migration times and peak areas were less than 0.9% and 7.5%, respectively. The applicabilities of the method for the analysis of ground water and lake water were examined.     

Separation and selectivity in micellar electrokinetic chromatography using sodium dodecyl sulfate micelles or Tween 20-modified mixed micelles

The separation and selectivity of eight aromatic compounds ranging from hydrophilic to hydrophobic properties in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) micelles or Tween 20-modified mixed micelles were investigated. The effect of different operation conditions such as SDS and Tween 20 modifier surfactant concentration, buffer pH, and applied voltage was studied. The resolution and selectivity of analytes could be markedly affected by changing the SDS micelle concentration or Tween 20 content in the mixed micelles. Applied voltage and pH of running buffers were used mainly to shorten the separation time. Complete separation of eight analytes could be achieved with an appropriate choice of the concentration of SDS micelles or Tween 20-modified mixed micelles. Quicker elution and better precision could be obtained with SDS-Tween 20 mixed micelles than with SDS micelles. The mechanisms that migration order of those analytes was mainly based on their structures and solute-micelle interactions, including hydrophobic, electrostatic, and hydrogen bonding interactions, were discussed.     

Acetonitrile derivatives as carbonyl synthons. One-pot preparation of diheteroaryl ketones via a strategy of sequential SNAr substitution and oxidation

The anion of 2-aryl acetonitrile derivatives reacted with a variety of heteroaryl chlorides or bromides in an S(N)Ar manifold to afford intermediate anions which were susceptible to oxidation. The addition of sodium peroxide and aqueous NH(4)OAc solution effected oxidation to afford aryl heteroaryl ketones in good yields. Aryl acetonitrile derivatives are thus umpolung-type synthons of the corresponding aryl carbonyl functionality.     

Analysis of serotonin release from single neuron soma using capillary electrophoresis and laser-induced fluorescence with a pulsed deep-UV NeCu laser

The use of capillary electrophoresis (CE) with laser-induced fluorescence excited by ultraviolet (UV) lasers in the range 200–300 nm has been restricted by the available wavelengths and expense of UV lasers. The integration of a NeCu deep UV laser operating at 248.6 nm with a single channel CE system with post-column sheath flow detection allows detection limits for serotonin and tryptophan of 3.9×10^-8 M and 4.5×10^-8 M respectively. Single cell analysis of serotonergic metacerebral cells from the sea slug Aplysia californica yields a value of 800±85 fmol of serotonin in each cell soma. For the first time, serotonin is directly detected in electrically stimulated release from single metacerebral cell soma, with approximately 4% of the serotonin contained in the soma released from a semi-intact preparation with a 2 min electrical stimulation.     

Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.