AnN-person noncooperative discounted vector-valued dynamic game with a metric space

AnN-person noncooperative discounted vector-valued game with a metric space is investigated. We define aD-convex equilibrium point and prove that aD-convex equilibrium point exists in this game system. A modified version of the original game system is formulated so that an equilibrium point of the modified version is aD-convex equilibrium point of the original game system. Under appropriate conditions, the converse holds in the sense that aD-convex equilibrium point is also an equilibrium point of the modified game system.     

非掺杂GaN的黄光发射模型确定

提出了一种新的光谱———吸收归一化光致发光激发谱,并用这种光谱研究了非掺杂GaN的黄光发射.实验上首次直接测量出了黄光发射的初始态的共振吸收峰位,从而解决了长期争论的有关黄光发射的发光模型问题 关键词： GaN薄膜 黄光发射 吸收归一化光致发光激发谱     

反应磁控溅射制备TiO2和Nb2O5混合光学薄膜

利用反应磁控溅射技术在BK-7基片上制备了二氧化钛和五氧化二铌均匀混合的光学薄膜.薄膜的内部微结构、表面形貌、化学成分比例以及光学性质等用X射线衍射、高分辨扫描电子显微镜、原子力显微镜、X射线光电子能谱和紫外可见近红外分光光度计进行研究;发现制备的薄膜为非晶结构,薄膜的表面平整、内部结构致密,不存在柱状结构或结晶颗粒的缺陷,TiO2与Nb2O5的成分比例大致是1∶1.54.从光学透射光谱计算的折射率和消光系数显示,在550 nm波长处的折射率为2.34,消光系数为2.0×10－4.结果表明制备的薄膜是TiO2和Nb2O5均匀混合的高质量光学薄膜.     

Mn替代对Dy2AlFe16-xMnx化合物的结构和磁性的影响

通过X射线衍射及磁测量手段研究了Dy2AlFe16-xMnx化合物的结构和磁性.研究结果表明Dy2AlFe16-xMnx化合物具有六角相的Th2Ni17型结构.对x=1,2的样品采用X射线热膨胀测定法在104-647K的温度范围内测量了其热膨胀性质,发现这些化合物在低温下存在热膨胀反常现象,在居里点附近出现负膨胀性质.对自发磁致伸缩的研究结果表明Dy2AlFe16-xMnx化合物中存在着较强的各向异性的自发磁致伸缩,随着Mn含量的增加,其低温下的自发体磁致伸缩减弱.磁测量结果表明Mn的替代导致Dy2AlFe16-xMnx化合物的居里温度及自发磁化强度急剧下降.     

光纤光热干涉气体检测技术研究进展

本文阐述光纤光热干涉气体检测的基本原理,从光纤光热相位调制的产生、动态过程、探测方法以及响应时间等方面出发,综述本研究组在光纤光热干涉气体检测方面的最新工作进展.光纤光热干涉技术具有灵敏度高、动态范围大、测量不受散射及其他损耗影响等优势,能够实现小型化、多点复用、组网及远程监测,在环境、医疗、安防等领域具有重要的应用.     

流延法制备高锂离子电导Li_(1.4)Al_(0.4)Ti_(1.6)(PO_4)_3固态电解质及其环氧树脂改性

以溶胶凝胶法合成的高纯Li_(1.4)Al_(0.4)Ti_(1.6)(PO_4)_3(LATP)纳米晶体粉末为原料,通过流延法成膜,在950℃下煅烧5 h合成LATP固态电解质片;对其进行环氧树脂改性后,能量色散X射线光谱元素图像表明环氧树脂完全浸入LATP内部,可以有效防止水渗透.研究发现流延法合成的LATP固态电解质在25℃?C时电导率高达8.70×10~(-4)S·cm~(-1)、活化能为0.36 eV、相对密度为89.5%.经过环氧树脂改性后电导率仍高达3.35×10-4S·cm-1、活化能为0.34 e V、相对密度为93.0%.高电导隔水的环氧树脂改性LATP固态电解质可作为锂金属保护薄膜用于新型高比容量电池.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

彩色遥感图像薄云去除方法

针对彩色遥感图像中薄云带来的降质问题,提出了一种基于低秩矩阵分解的去云方法。将彩色遥感图像分成三个单通道图像,对每一个通道进行低秩矩阵分解,得到单通道薄云信息;根据薄云在三个通道中均匀分布的特点,选取合适的阈值对薄云信息进行自动判定,提取代表三个通道的薄云图像;用三个通道的图像分别减去对应通道的薄云图像,并融合三个通道的结果得到去云后的彩色遥感图像。实验结果表明,该方法不仅能够保留无云区域信息的完整性,而且对有云区域的处理在主观视觉效果和客观评价指标上都具有较好的效果。     

A tunable multi-wavelength Brillouin–erbium fiber laser with fourfold Brillouin frequency spacing

We have experimentally demonstrated a tunable multi-wavelength Brillouin–erbium fiber laser with over 40 GHz spacing utilizing two cascaded double Brillouin-frequency-spacing cavities. In this laser configuration, two segments of 25 km-long single-mode fibers are used as Brillouin gain medium in each ring cavity, and a segment of 8 m-long erbium-doped fiber with 980 nm pump is employed to amplify Brillouin pump (BP). At BP wavelength of 1550 nm, BP power of 8.3 dBm (6.8 mW) and the maximum 980 nm pump power of 27.78 dBm (600 mW), seven output channels with fourfold Brillouin-frequency spacing, and the tuning range of 15 nm from 1545 to 1560 nm are achieved. The proposed multi-wavelength Brillouin–erbium fiber laser has wide applications, such as in microwave signal generation and optical communications.