Boundary reflection from curved liquid surfaces and its application

A boundary light reflection from curved liquid surfaces was discovered. Due to the wetting effect, the liquid surface near the plate which was inserted into the liquid was deformed. When a collimated light beam vertically illumined the curved liquid surface, special reflective patterns of a strip-shape dark region in the center and the visibility interference fringes on both sides was observed for the up-curved liquid surface. The width of the dark region increases with the decreasing width of the incident beam. The relation of the dark region width and the incident beam width was derived theoretically. The slope and the height of curved liquid surface were obtained directly from measuring the dark central region width of the reflection pattern and the incident beam width. Furthermore, the analytic expression of the profile of the curved liquid surface was derived. As a result, it shows that an effective and practical technique for measuring the characterization of curved liquid surface was found.     

宽视场大相对孔径星敏感器光学系统设计

介绍了一种用于卫星姿态控制的星敏感器光学系统,该光学系统焦距为51 mm,相对孔径为1/1.1,视场角为21°×21°（圆视场2ω＝30°）,光谱范围为0.5～0.85 μm,采用了复杂化双高斯结构.与普通成像系统不同的是,该系统要求对不同光谱的恒星所采集到的点像能量中心是一致的,且星像点像的弥散圆须控制在一定的范围内.具有倍率色差小、轴上和轴外能量分布比较一致的特点.     

KBA显微镜成像系统的成像模拟及X光成像实验的研究

KBA显微镜是一种非轴对称、非共轴的掠入射成像系统。其结构复杂,调节精度要求很高,在实际成像实验操作中难以掌握其成像特性。利用光学设计软件模拟其成像,对系统的调节和成像分析提供有益的参考。利用光学设计软件ZEMAX模拟了KBA显微镜对点源的成像过程,给出了KBA显微镜成像系统的焦深约为1 mm,景深为50 mm左右。并且由模拟可知,掠入射角对成像的影响很大。对像素尺寸约10μm的探测设备,模拟得出KBA成像系统的空间分辨力上限为3μm左右。基于星光Ⅱ装置对周期为20μm的网格靶成像,获得了KBA显微镜较为清晰的X光图像。该项工作为进一步开展掠入射成像系统的研究奠定了基础。     

掺杂对CH样品Rayleigh-Taylor不稳定性增长的影响

在神光II激光装置上进行了辐射驱动不同掺杂样品的单模Rayleigh-Taylor(RT)不稳定性实验.结果显示:与纯碳氢(CH)样品相比,掺Br的CH样品的扰动更早、更快地进入非线性区,产生二次谐波,并且掺Br比例越高,CH样品扰动进入非线性区的时间越早,相同时刻扰动的二次谐波的幅度越高.这是因为密度梯度效应抑制了二次谐波的产生,掺Br比例越高,密度梯度标长越小;同时密度梯度效应还抑制三次谐波对基模增长的负反馈,造成基模具有更大的线性增长,导致线性饱和幅值大于经典值0.1λ.     

Highly stable amorphous indium‐zinc‐oxide thin‐film transistors with back‐channel wet‐etch process

The stabilities of amorphous indium‐zinc‐oxide (IZO) thin film transistors (TFTs) with back‐channel‐etch (BCE) structure are investigated. A molybdenum (Mo) source/drain electrode was deposited on an IZO layer and patterned by hydrogen peroxide (H₂O₂)‐based etchants. Then, after etching the Mo layer, SF₆ plasma with direct plasma mode was employed and optimized to improve the bias stress stability. Scanning electron microscopy and X‐ray photoelectron spectroscopic analysis revealed that the etching residues were removed efficiently by the plasma treatment. The modified BCE‐ TFTs showed only threshold voltage shifts of 0.25 V and –0.20 V under positive/negative bias thermal stress (P/NBTS, V_GS = ±30 V, V_DS = 0 V and T = 60 °C) after 12 hours, respectively. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of initial-state target polarization on single ionization of helium by 1-keV electron impact

We report new results of triple differential cross sections for the single ionization of helium by 1-KeV electron impact at the ejection energy of 10 eV. Investigations have been made for both the perpendicular plane and the plane perpendicular to the momentum transfer geometries. The present calculation is based on the three-Coulomb wave function. Here we have also incorporated the effect of target polarization in the initial state. A comparison is made between the present calculation with the results of other theoretical methods and a recent experiment [D黵r M, Dimopoulou C, Najjari B, Dorn A, Bartschat K, Bray I, Fursa D V, Chen Z, Madison D H and Ullrich J 2008 Phys. Rev. A 77 032717]. At an impact energy of 1 KeV, the target polarization is found to induce a substantial change of the cross section for the ionization process. We observe that the effect of target polarization plays a dominant role in deciding the shape of triple differential cross sections.     

金属铈催化剂对单壁纳米碳管生长和结构的影响

研究了一种利用新型催化剂制备单壁纳米碳管（SWNTs）的工艺方法.将金属铈的氧化物（Ce O₂）与石墨粉按一定比例混合，填充到已打好孔的石墨棒中制成复合石墨电极 ，以其为阳 极在高温氦电弧中实施电弧放电.放电后的生成物经高分辨透射电子显微镜（HRTEM）和拉曼 光谱(Raman)的观察及分析表明：生成物中含有大量呈束状存在的单壁纳米碳管，管径均匀 ，平均直径为120—132nm. 关键词： 单壁纳米碳管 电弧放电 透射电镜分析     

Combined optical dispersion by prism and arrayed waveguide grating with multiple diffraction orders for Raman spectrometer

A compact dispersive device for Raman spectrometer was proposed to achieve a spectrum resolution below 0.55 nm in the spectral range of 800 to 1000 nm. A 41-channel arrayed waveguide grating (AWG) with eleven different diffraction orders was designed, and each output channel of this AWG contained eleven light signals with periodically 20 nm spaced wavelength. These signals were further cross-dispersed by a prism, and finally form a 41 × 11 spots array on a CCD. The detailed theoretical analysis and simulation of this dispersive device were introduced in this paper. Compared with commercial dispersive modules composed of grating, lens, and mirrors, the proposed structure is able to provide a compact device with higher spectrum resolution, which is attractive for handheld Raman spectrometer.     

大气损耗对量子干涉雷达的影响机理

以马赫-曾德尔干涉仪作为基本模型对量子干涉雷达的探测原理进行分析,讨论了目标探测过程中光场量子态的具体演化情况,并采用宇称算符作为相位检测算符分析了量子干涉雷达的回波信号,将其与基于振幅检测的经典雷达回波信号进行比较,证明量子干涉雷达具有超越衍射极限的超分辨率特性.此外,针对大气损耗的进一步研究显示:量子干涉雷达分辨率受大气损耗影响较小,且可通过增大脉冲光子数N克服其影响;而量子干涉雷达的灵敏度则受到较大影响,尤其当两路光的损耗情况不同时,灵敏度随N的增加呈现先升高后降低的趋势;当两路光损耗情况相同时,系统灵敏度随N的增加而升高且正比于1/N~(1/2).综上,可根据探测光的大气损耗情况适当调节参考光的衰减来克服大气损耗带来的不良影响.     

莫桑比克摩根石的谱学特征研究

近几年摩根石凭借它独特的色彩悄然兴起。采用常规仪器测试、激光剥蚀等离子质谱(LA-ICP-MS)、紫外-可见吸收光谱(UV)、红外光谱(IR)和拉曼光谱(Raman),对产自莫桑比克的摩根石基本性质、化学成分特征、谱学性质进行了较为详细的分析。紫外-可见光谱获得样品主波长、饱和度、明度等相关颜色参数;成分测试显示样品摩根石中Li,Rb,Cs,Mn等含量较高,计算所得到的晶体化学式为Be_3.2090Al_2.0757Li_0.425Si_5.664O₁₈(Na_0.1420Cs_0.1316);红外光谱显示,摩根石的结构振动区主要在指纹区400～1 200 cm-1,其中900～1 200 cm-1为Si—O—Si环的振动区,550～900 cm-1为Be—O振动区,而450~530 cm-1为Al—O振动区。由于摩根石中的Cs元素的含量较高,而Cs为原子序数较高的元素,其存在可能令Si—O—Si环振动谱峰向低频位移。拉曼光谱显示1 065 cm-1为Si—O非桥氧伸缩面内振动,1 000 cm-1左右为Be—O的非桥氧伸缩面外振动,685 cm-1为Si—O—Si的变形面内振动,400 cm-1为O—Be—O的面外弯曲振动,在390 cm-1处为Al—O的面外变形振动,在320 cm-1处为Al—O的面外弯曲振动。