反射率的数值反演

通过分析热流边界条件下的一维热传导过程,提出并实现了由后表面温度变化历史曲线反演前表面反射率变化历史曲线的数值方法。通过一维热传导的正向和反演计算过程,验证了反演程序的可靠性。对数值反演计算和实验测量两种方式得到的反射率曲线进行了对比,结果显示,两条反射率曲线在变化趋势上符合较好,初步验证了一维温度场中数值反演方法的可行性。     

基于光导开关的Blumlein型PFN能量转换效率

为了驱动低能重复频率高阻抗X光管,采用低感陶瓷电容构建了一套电长度约33.5 ns、阻抗约8 的Blumlein型脉冲形成网络（BPFN）,在匹配负载条件下研究了采用GaAs光导开关（PCSS）作为脉冲输出开关时PCSS工作场强、激光触发能量与能量转换效率的关系。实验表明:PCSS截止场强为3.21～4.94 kV/cm,在工作场强高于20 kV/cm时,截止场强引起的能量损失对能量转换效率的影响不大;PCSS较高的导通电阻是影响PFN能量转换效率的主要因素,随着工作场强、激光触发能量的上升,能量转换效率呈指数上升趋势。     

Probing Structural Compositions of Porous Media with Two-dimensional Nuclear Magnetic Resonance

Combination of two-dimensional nuclear magnetic resonance (2-D NMR) correlation maps and a simple three-component model are proposed here to identify the structural composition of porous media. Homogeneous magnetic field and field with constant gradient of a novel Halbach sensor are employed for respective relaxation and diffusion measurements. NMR results are compared and confirmed with independent measurements on a scanning electron microscope and by energy dispersive spectrometer methods.     

All-solid-state continuous-wave frequency doubling Nd:LuVO4/LBO laser with 2.17 W output power at 543 nm

Efficient and compact green-yellow laser output at 543 nm is generated by intracavity frequency doubling of a CW diode-pumped Nd:LuVO₄ laser at 1086 nm under the condition of suppressing the higher gain transition near 1064 nm. With 16 W of diode pump power and the frequency-doubling crystal LBO, as high as 2.17 W of CW output power at 543 nm is achieved, corresponding to an optical-to-optical conversion efficiency of 13.6% and the output power stability over 8 hours is better than 2.86%. To the best of our knowledge, this is the highest watt-level laser at 543 nm generated by intracavity frequency doubling of a diode pumped Nd:LuVO₄ laser at 1086 nm.     

Ni熔体凝固过程中临界晶核和亚临界晶核的分子动力学模拟

本文用分子动力学模拟研究了Ni熔体以不同冷速凝固后微观结构的演变规律, 并通过理论计算确定出了Ni熔体凝固后获得理想非晶的临界条件. 模拟结果发现冷速小于10¹¹ K/s时, Ni 熔体凝固后形成晶态组织; 冷速在10¹¹ K/s到10^14.5 K/s之间时, Ni熔体凝固后形成由晶态结构与非晶态结构组成的混合组织. 冷速小于10¹⁰ K/s, Ni 熔体凝固后形成的晶态组织具有fcc结构; 冷速在10¹⁰ K/s到10^14.5 K/s之间时, Ni熔体凝固后组织中的晶态由fcc和hcp结构层状镶嵌排列构成. 通过分析模拟结果和计算结果, 确定出了Ni熔体凝固后形成理想非晶的临界冷速为10^14.5 K/s. 并发现Ni熔体中临界晶核(冷速等于10^14.5 K/s)和亚临界晶核(冷速大于10^14.5 K/s) 均由fcc和hcp组成层状偏聚结构, 这表明Ni熔体中生长的晶体、临界晶核和晶胚的结构是相同的. 关键词： 分子动力学模拟 晶体团簇 临界冷速 结构     

波纹管对超导电缆出口液氮温度的影响

建立了30米长高温超导电缆的二维模型,利用Fluent软件对该模型进行仿真分析。在该模型中,采用波纹管恒温器,分析了波纹管的波距、波高等因素对出口液氮温度的影响。结果表明:在相同的热负荷及流量下,波纹管的波距越小,波高越大,出口液氮温度越高。超导电缆波纹管内液氮温度模拟,为低温冷却系统的优化设计提供理论依据。     

Blocked-micropores,surface functionalized,bio-compatible and silica-coated iron oxide nanocomposites as advanced MRI contrast agent

Quasi-critical fluctuations occur close to critical points or close to continuous phase transitions. In three-dimensional systems, precision tuning is required to access the fluctuation regime. Lowering the dimensionality enhances the parameter space for quasi-critical fluctuations considerably. This enables one to make use of novel properties emerging in fluctuating systems, such as giant susceptibilities, Casimir forces or novel quasi-particle interactions. Examples are discussed ranging from simple metal–adsorbate systems to unconventional superconductivity in iron-based superconductors.