Antibacterial membranes based on chitosan and quaternary ammonium salts modified nanocrystalline cellulose

Etherification of nanocrystalline cellulose (NCC) with three kinds of quaternary ammonium salts epoxypropyltrimethylammonium chloride, N,N‐dimethyl‐N‐dodecyl‐N‐(1,2‐epoxypropyl) ammonium chloride (DMDEPAC), and N,N‐dimethyl‐N‐octadecyl‐N‐(1,2‐epoxypropyl) ammonium chloride (DMOEPAC) was successfully performed via a nucleophilic addition reaction. The synthesized DMDEPAC and DMOEPAC were characterized by nuclear magnetic resonance. The modified NCC particles, NCC epoxypropyltrimethylammonium chloride, NCC‐DMDEPAC, and NCC‐DMOEPAC, were characterized by energy dispersive spectrometer. Nanocomposite films based on chitosan (CS) containing quaternary ammonium salts modified NCC were prepared with nanoparticle loadings of 5.0, 7.5, and 10.0%, respectively. The effect of nanoparticle content on the tensile strength of composite films was studied. The results indicated that the films with 5.0% nanoparticle loading exhibited the biggest increase in tensile strength. Surface morphology, smoothness, and antibacterial properties of composite films containing 5% modified NCC were also studied. CS/NCC‐DMDEPAC‐5.0 and CS/NCC‐DMOEPAC‐5.0 displayed excellent biocidal abilities against both Gram‐positive Staphylococcus aureus (ATCC 6538) and Gram‐negative Escherichia coli O157:H7 (ATCC 43895). The bio‐based nanocomposite films with increased mechanical strength and excellent antibacterial properties show great potential as food packaging materials. Copyright © 2017 John Wiley & Sons, Ltd.     

聚羧酸系减缩剂的制备及应用性能研究

在水溶液中以过硫酸铵为引发剂、次亚磷酸钠为链转移剂,丙烯酸、二乙二醇单丁醚马来酸单酯为反应单体,合成聚羧酸减缩剂。研究在反应温度为75℃时,引发剂用量、链转移剂用量、单体质量分数对水溶液表面张力的影响。结果表明,聚合的最佳反应条件为:过硫酸铵用量为0.7%,次亚磷酸钠用量为5%,单体质量分数为24%。采用红外光谱对聚合物的结构进行表征,研究其对水溶液表面张力,溶液的蒸发速率,砂浆的干燥收缩、抗折、抗压强度的影响。研究发现,当聚合物的掺量为6%时,在水溶液中表面张力降低了40%,溶液的蒸发速率降低了15.3%。聚合物的掺量为3%时,与空白样相比水泥砂浆的28d干燥收缩率降低了18.9%,抗压强度与抗折强度有所降低。     

悬浮液直接进样ICP–OES法测定高纯氧化铝中的铁、钛、硅、铬

采用悬浮液直接进样电感耦合等离子体发射光谱法(ICP–OES)测定高纯氢氧化铝中铁、钛、硅、铬的含量。悬浮液用电磁搅拌器搅拌,均匀地分散在溶液中,通过仪器蠕动泵进入雾化室,均匀无阻地导入ICP光源。Fe,Ti,Si,Cr的分析谱线分别为259.940,336.112,251.611,205.552 nm;RF功率为1 300W,等离子体气流量为13.0 L/min,雾化器气体流量为0.60 L/min,辅助气流量为1.00 L/min。Fe,Ti,Si,Cr的质量浓度分别在0.0~30.0,0.0~15.0,0.0~90.0,0.0~15.0μg/m L范围内与信号强度呈良好的线性,线性相关系数均大于0.999,方法的检出限为0.027 6~0.993 9μg/m L,测量结果的相对标准偏差为0.65%~6.84%(n=11),回收率为95.0%~104.8%。该法抗干扰能力强、线性范围宽,适用于高纯氢氧化铝中铁、钛、硅、铬含量的分析。     

Multi-bond network hydrogels with robust mechanical and self-healable properties

Multi-bond network(MBN) which contains a single network with hierarchical cross-links is a suggested way to fabricate robust hydrogels. In order to reveal the roles of different cross-links with hierarchical bond energy in the MBN, here we fabricate poly(acrylic acid) physical hydrogels with dual bond network composed of ionic cross-links between carboxylFe3+ interactions and hydrogen bonds, and compare these dually cross-linked hydrogels with singly and ternarily cross-linked hydrogels. Simple models are employed to predict the tensile property, and the results confirm that the multi-bond network with hierarchical distribution in the bond energy of cross-links endows hydrogel with effective energy-dissipating mechanism. Moreover, the dually cross-linked MBN gels exhibit excellent mechanical properties(tensile strength up to 500 k Pa, elongation at break ~ 2400%) and complete self-healing after being kept at 50 °C for 48 h. The factors on promoting self-healing are deeply explored and the dynamic multi-bonds are regarded to trigger the self-healing along with the mutual diffusion of long polymer chains and ferric ions.     

花瓣状Co-Al双金属硫化物/泡沫镍电极材料的制备及其超级电容性能的研究

采用低成本的两步水热法直接将Co-Al双金属硫化物生长在泡沫镍上,成功制备了CoAl₂S₄/Ni电极材料,利用X射线衍射(XRD)、扫描电镜(SEM)和电化学测试等手段对其结构、形貌和超级电容性能进行了表征。结果表明,CoAl₂S₄/Ni电极材料呈现花瓣状的三维多孔结构,且表面粗糙,这种结构有利于电解液和电极材料的充分接触,具有良好的导电性和比电容性能;当电流密度为1A/g时,电极的放电比容量高达2187.1 F/g, 循环100次后比电容的保持率为90.1%,相关研究为超级电容器电极材料的制备及性能研究提供思路。     

Click polymerization: The aurora of polymer synthetic methodology

As an emerged efficient polymerization methodology, the click polymerization plays a significant role in the area of polymer and materials sciences. Similar to the click reaction, the click polymerization enjoys the advantages of high efficiency, mild reaction conditions, and high regio- and stereo-selectivity etc. In this highlight, we summarize the recent progress on click polymerizations, with focus on the alkyne-based ones. The challenges and opportunities in this area are also briefly discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 616–621     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Potassium bromide catalyzed NS bond formation via oxidative dehydrogenation

N-Substituted benzo[d]isothiazol-3(2H)-ones are a family of compounds with extremely important application. Recently, we have developed a new green pathway to synthesize these compounds via potassium bromide-catalyzed intramolecular oxidative dehydrogenative cyclization. This reaction has high functional group tolerance and affords excellent yield even in gram scale.     

Geometric Design of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells by Multiphysics Simulations

High volumetric power density (VPD) is the basis for the commercial success of micro-tubular solid oxide fuel cells (mtSOFCs). To find maximal VPD (MVPD) for anode-supported mtSOFC (as-mtSOFC), the effects of geometric parameters on VPD are analyzed and the anode thickness, t_an, and the cathode length, l_ca, are identified as the key design parameters. Thermo-fluid electrochemical models were built to examine the dependence of the electrical output on the cell parameters. The multiphysics model is validated by reproducing the experimental I-V curves with no adjustable parameters. The optimal l_ca and the corresponding MVPDs are then determined by the multiphysics model for 20 combinations of r_in, the inner tube radius, and t_an. And all these optimization are made at 1073.15 K. The results show that:(i) significant performance improvement may be achieved by geometry optimization, (ii) the seemingly high MVPD of 11 and 14 W/cm³ can be easily realized for as-mtSOFC with single-and double-terminal anode current collection, respectively. Moreover, the variation of the area specific power density with l_ca2(2 mm, 40 mm) is determined for three representative (r_in, t_an) combinations. Besides, it is demonstrated that the current output of mtSOFC with proper geometric parameters is comparable to that of planar SOFC.