Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Simultaneous determination of polycarboxylic acids by capillary electrophoresis with a copper electrode

The simultaneous determination of polycarboxylic acids including oxalic acid, citric acid, malonic acid, malic acid, tartaric acid, aspartic acid and glutamic acid was achieved by capillary electrophoresis with a copper disk electrode (d = 200 microm). In the system. 0.2 mmol/l cetylpridinium bromide (CPB) was used as an electroosmotic flow (EOF) modifier to reverse the direction of EOF. The effects of the solution pH and CPB concentration on separation were evaluated to achieve the optimum separation conditions. At the working potential of +0.14 V (vs. saturated calomel electrode), the calibration curves for all polycarboxylic acids studied were linear with 2 approximately 3-orders of magnitude and all the detection limits (S/N = 3) were below 15 fmol except malonic acid. Furthermore, the oxalic and citric acids in urine were successfully separated and determined with high sensitivity.     

A convenient catalytic approach to synthesize straight boron nitride nanotubes using synergic nitrogen source

Straight boron nitride nanotubes (BNNTs) with pure hexagonal phase were conveniently prepared by heating the mixture of Mg(BO₂)₂ · H₂O, NH₄Cl, NaN₃ and Mg powder in an autoclave at 600 °C for 20–60 h. These BNNTs had diameters mainly ranging 30–300 nm and lengths up to 5 μm, and a majority of them had at least one closed end. Besides the traditional end tips, additional cone-like tips were frequently found to be attached on the BNNTs. The effects of temperature, reactants and the possible mechanism of the catalytic formation of the BNNTs are discussed.     

Low-dimensional hybrid copper halides with novel D6R Cu(6)I(6) cores

Two low-dimensional hybrid copper halides, (2,2'-bipy)Cu(3)I(3) (1) and (2,2'-bipy)Cu(4)I(4) (2) (2,2'-bipy = 2,2'-bipyridine), with novel D6R (double six-membered rings) Cu(6)I(6) cores were synthesized by hydro(solvo)thermal reactions and characterized by single-crystal X-ray diffraction.     

Structure of microparticles in solid-stabilized emulsions

Emulsions of oil and water stabilized by adsorbed solid particles are known as solid-stabilized emulsions (often referred to as Pickering emulsions). Using confocal microscopy, we have studied the assembly of colloidal-sized polystyrene particles in poly(dimethylsiloxane)-in-water solid-stabilized emulsions. Monodisperse polystyrene particles, when included in the emulsions at low concentrations, were found to form small patches with local "hexagonal" order, separated by other particle-free domains. Polystyrene particles with different sizes (1 and 4 microm) and different wettability could simultaneously segregate to the emulsion interface; even mixtures of hydrophobic and hydrophilic solid particles were found to simultaneously segregate to the same interface.     

Investigation of ultraviolet curable waterborne polyurethane acrylate dispersion based on hydroxyl-terminated polybutadiene

A new kind of ultraviolet (UV) curable waterborne polyurethane acrylate dispersion was synthesized based on hydroxyl-terminated polybutadiene (HTPB), poly-(propylene glycol) (PPG), isophorene diisocyanate (IPDI), 2-hydroxy ethyl acrylate (HEA) and dimethylol propionic acid (DMPA) after neutralizing by triethylamine (TEA). 2-Hydroxy-1-[4-2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959) was used as a photoinitiator and deionized water as a diluent. Fourier transform infrared (FTIR) analysis was used to identify the chain structure of the UV-curable polyurethane prepolymer based on HTPB and the curing process. Effects of relative content of HTPB and PPG on emulsion stability, resistance to water and ethanol, thermal stability, compatibility of soft and hard segment, as well as the mechanical property of the cured film were investigated. Translated from Polymer Materials Science and Engineering, 2006, 22(3): 199–203 (in Chinese)     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

New synthesis of two optically active steroid CD ring synthons by microbial asymmetric reduction

Two optically active steroid CD ring synthons 4 and 19 were synthesized from 11 obtained by the microbial asymmetric reduction of a pro-chiral trione 10 which could be efficiently prepared by the reaction of a new annelating reagent 9 with 2-ethyl-cyclopentane-1, 3-dione.     

活性炭的Zeta电位对其吸附达旦黄规律的影响

The effect of pH on the adsorption of anionic dye Titan yellow on the activated carbon from aqueous solution has been studied. It has been found that the Zeta potential of the activated carbon has a great effect on adsorption capacity of Titan yellow. The kinetic and the thermodynamic parameters of adsorption as a function of pH has been evaluated. The mechanism for adsorption of anionic dye Titan yellow on the activated carbon has also been discussed.     

Lewis acid-catalyzed formation of Ugi four-component reaction product from Passerini three-component reaction system without an added amine

In the presence of a Lewis acid the phenol-Passerini three-component reaction (phenol-P-3CR) system is found to deliver a product of the phenol-Ugi four-component reaction (phenol-U-4CR). It is the first demonstration of an isocyanide as an amine equivalent in isocyanide-based multicomponent reactions (IMCRs). In general, by using Ti(O-i-Pr)₄ in MeOH both phenol-U-4CR and U-4CR products are synthesized from an aromatic aldehyde, a phenolic or carboxylic acid, and an isocyanide. Moreover, by using MeCN as the solvent, the phenol-P-3CR products can be obtained in good yields without contamination of the phenol-U-4CR products.