Effect of carbon nanotubes on the crystallization and properties of polypropylene

The effect of different concentrations of single‐walled carbon nanotubes (SWNTs) on the nonisothermal crystallization kinetics, morphology, and mechanical properties of polypropylene (PP) matrix composites obtained by melt compounding was investigated by means of X‐ray diffraction, differential scanning calorimetry, optical and scanning electron microscopy, and dynamic mechanical thermal analysis. Microscopy showed well‐dispersed nanotube ropes together with small and large aggregates. The modulus was found to increase by about 75% at a level of 0.5 wt % nanotubes. The SWNTs displayed a clear nucleating effect on the PP crystallization, favoring the α crystalline form rather than the β form. The crystallization kinetics analysis showed a significant increase in activation energy on incorporating nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2445–2453, 2005     

Synthesis of 2‐Dihydrooxadiazolinyl Chromones

Reactions of the substituted 2‐formyl chromones with aroylhydrazines gave corresponding 2‐(aroylhydrazonomethylidyne) chromones. Then 2‐(3′‐acetyl‐5′‐aryl‐2′,3′‐dihydro‐1′,3′,4′‐oxadiazol‐2′‐yl) chromones were prepared by these 2‐(aroylhydrazonomethylidyne) chromones under refluxing with Ac₂O. All target compounds were characterized through elemental analysis and IR, ¹H NMR, MS.     

反相高效液相三元流动相台阶梯度分离条件的快速优化方法

 根据溶质在柱内的迁移规律 ,建立了一种利用线性梯度实验快速获得溶质保留值方程系数 ,然后以串行响应函数为优化指标进行多台阶梯度分离条件优化的方法。与利用等度实验获得保留值方程的方法相比 ,该法可以大大缩短优化时间。通过该方法对芳香胺和衍生化氨基酸样品进行了分离 ,获得了满意的分离度 ,表明该方法的预测精度很好。     

CBS法合成光学活性二茂铁基醇

以非天然氨基酸合成的手性β-氨基醇(4a～4c)为催化剂，用于不对称硼烷还原反应来合成光学活性的二茂铁基醇(1a～1e)，对映体过量值高达96%。     

Polyterephthalamides with naphthoxy‐pendent groups

A series of new aromatic polyamides having pendent naphthoxy groups were synthesized by the triphenyl phosphite‐activated polycondensation of (2‐naphthoxy)terephthalic acid (NOTPA) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The diacid monomer NOTPA was prepared from the nitro displacement of dimethyl 2‐nitroterephthalate with the potassium naphthoxide of β‐naphthol, followed by base‐induced ester hydrolysis. All the resulting polymers were noncrystalline and readily soluble in aprotic polar solvents such as NMP and N,N‐dimethylacetamide. Almost all the polymers could be solution‐cast to tough, creasable amorphous films with good mechanical properties, the values of tensile strengths ranging from 90 to 124 MPa with initial moduli ranging from 1.72 to 2.51 GPa. Except for two examples, all the other polyamides displayed discernible glass transitions between 189 and 248 °C in the differential scanning calorimetric traces. These polyamides showed insignificant decomposition below 400 °C in nitrogen or air. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1781–1789, 2002     

含己烷雌酚的聚磷酸酯的合成及其抗肿瘤活性研究

合成了３种主链含己烷雌酚的生物可降解的聚磷酸酯，结构经ＩＲ，＾１ＨＮＭＲ和元素分析鉴定，通过水接触角的测定研究了聚合物的亲水－疏水性能，以ｐＨ值变化表征了聚合物的体外水解速率。初步的体外实验表明，此类聚磷酸酯具有较好的体外抗艾氏腹水癌活性。     

Biomimetic Asymmetric Reduction of Quinazolinones with Chiral and Regenerable NAD(P)H Models

A facile approach to chiral dihydroquinazolinone derivatives has been described via biomimetic asymmetric reduction of quinazolinones with chiral and regenerable NAD(P)H models. The utility of this method was demonstrated by a concise synthesis of the bromodomain protein divalent inhibitor.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

Determination of endocrine disruptors in environmental waters using poly(acrylamide-vinylpyridine) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography with fluorescence detection

A method for the determination of endocrine disruptors, bisphenol A and 17alpha-ethinylestradiol, in environmental water samples was developed using in-tube solid-phase microextraction followed by liquid chromatography and fluorescence detection. A poly(acrylamide-vinylpyridine) monolithic capillary column was applied as the extraction media in view of its greater phase ratio than open-tubular capillaries and thus higher extraction efficiency. After optimizing the extraction conditions, bisphenol A and 17alpha-ethinylestradiol were extracted directly from water samples in a wide dynamic linear range of 0.5-1000 ng mL(-1), with the detection limits obtained as 0.064 and 0.12 ng mL(-1), respectively. The precision of the method was satisfactory with the intraday and interday RSD values smaller than 7.2%. Environmental water samples of different sources were successfully analyzed with the presented method and the monolithic capillary was proved to be robust and reusable in analyzing real water samples.     

Synthesis and Antimicrobial Activity of New Pyridothienopyrimidines and Pyridothienotriazines

5‐Acetyl‐3‐amino‐4‐aryl‐6‐methylthieno[2,3‐b]pyridine‐2‐carboxamides ( 5a,b ) were reacted with triethyl orthoformate or nitrous acid to give the corresponding pyrimidinones 6a,b and triazinones 7a,b . The reaction of 5a,b with acetic anhydride was carried out and its products were identified as a mixture of 8‐acetyl‐9‐aryl‐2,7‐dimethylpyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidine‐4(3H)‐one ( 9a,b ) and related 5‐acetyl‐4‐aryl‐3‐biacetylamino‐6‐methylthieno[2,3‐b]pyridine‐2‐carbonitrile ( 10a,b ). Reaction of 7a with some halocompounds afforded the N‐alkylated triazinones 8a‐c . Chlorination of 6a,b and 9a,b with phosphorus oxychloride produced 4‐chloropyrimidines 11a‐d which were used as precursors for the rest of the target heterocycles. Some of the prepared compounds were tested in vitro for their antimicrobial activities.