1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

硅的原子吸收光谱分析进展

对近十年来用原子吸收光谱法测定硅的情况进行评述．重点介绍用石墨炉测定硅时，为了避免硅与石墨炉中碳形成难熔碳化硅影响测定硅的灵敏度而使用的各种化学改进剂，涂层石墨管和一些新的实验技术．引用参考文献４２篇．     

改性三氧化二铬催化1,1,3,3-四氯丙烯氟化高选择性合成反式-1-氯-3,3,3-三氟丙烯研究

反式-1-氯-3, 3, 3-三氟丙烯 (HCFO-1233zd (E))是近年来正在研发的第四代发泡剂,其大气臭氧消耗潜能值为0.00024,温室效应潜能值为7.0,毒性低,常态下不燃,使用安全;它也是合成含氟精细化工品的中间体,以及合成氟树脂和氟弹性体的单体。本论文制备了Al,Zn,Co改性的Cr2O3催化剂,将其成功应用于1, 1, 3, 3-四氯丙烯（HCC-1230za）与氟化氢反应中,高选择性地合成HCFO-1233zd (E),复合催化剂Zn / Cr2O3显示高稳定性,其中HCC-1230za转化率高达99.4％,HCFO-1233zd（E）的选择性高达98.2％。反应条件诸如反应物HF / HCC-1230za 的摩尔比和反应温度等对产物分布有显着影响。在相对较低的温度（200?C）和较大的HF / HCC-1230za 摩尔比（10：1）下,对HCFO-1233zd（E）的选择性有利。通过XRD,XPS,BET和V70吡啶吸附红外光谱技术对复合催化剂Zn / Cr2O3进行了表征。 XRD结果表明,催化剂中大多数无定形Cr2O3和高度分散微晶相Cr2O3共同导致催化剂的高活性和高稳定性。HCC-1230za的转化率与预氟化处理催化剂Zn / Cr2O3的比表面积有关,催化剂的比表面积越高,催化活性越高。XPS光谱表明,在预氟化过程中,表面铬氧化物可能与F原子强烈相互作用,从而导致Cr原子的化学环境发生广泛变化。V70吡啶吸附红外光谱和氨-程序升温脱附技术结果证明尚未失活的催化剂Lewis 酸和Br?nsted酸中心的数目和强度与新制备的催化剂相比明显提高。     

Simultaneous determination of mitotane,its metabolite,and five steroid hormones in urine samples by capillary electrophoresis using β-CD2SDS1 complexes as hydrophobic compounds solubilizers

Mitotane is a cytotoxic drug used in the treatment of inoperable adrenocortical carcinoma, it inhibits steroidogenesis as well, and therefore monitoring the level of steroid hormones in patients treated with mitotane is a crucial point of therapy. Hence, we have developed a simple, fast, and efficient electrophoretic method combined with reverse polarity sweeping as online preconcentration technique and dispersive liquid–liquid microextraction for the simultaneous determination of mitotane, its main metabolite DDA, and five steroid hormones (progesterone, testosterone, epitestosterone, cortisol, and corticosterone) in urine samples. In addition, a new sample matrix consisting of β-CD₂SDS₁ complexes for a high hydrophobic compounds solubilization was developed. Approach based on the application of β-cyclodextrin and SDS complex of a ratio 2:1 allowed for hydrodynamic injection into the capillary of a solution containing both mitotane and other analytes. The detection limits of the analytes for the reverse polarity sweeping-dispersive liquid–liquid microextraction method were found to be in the range of 1.5–3 ng/mL, which were approximately 1000 times lower than in the conventional hydrodynamic injection (5 s, 0.5 psi) without any preconcentration procedure. All analytes were completely resolved in less than 13 min by uncoated silica capillary with an inner diameter of 75 μm (ID) × 60 cm. Electrophoretic separation was performed in reverse polarity with a voltage of –25 kV with a background electrolyte (BGE) consisting of 100 mM SDS, 25% ACN, 25 mM phosphate buffer (pH 2.5), and 7 mM β-cyclodextrin.     

核化学与放射化学的研究进展

在我国核能快速发展的新形势下,新型核能资源的开发、乏燃料后处理、放射性废物处理与处置等核燃料循环化学研究日益活跃。随着科学技术的不断发展,离子加速器、反应堆、各种类型的探测器和分析设备、以及计算机技术等的发展,核化学与放射化学研究的范围和成果在不断扩展和增加,如核安全、环境放射化学、放射分析化学、放射性药物与标记化合物等,研究成果对于国防建设、核能发展、核技术应用等方面具有重要支撑作用。本文综述了近年来国内在上述领域所取得的研究进展。共引用参考文献161篇。     

基于纤维素的气凝胶材料

纤维素是自然界中储量最为丰富的一种天然高分子。作为继无机气凝胶和合成聚合物气凝胶之后的第三代气凝胶,纤维素基气凝胶材料兼具绿色可再生的纤维素材料和多孔气凝胶材料两者的优点,成为纤维素材料研究与应用中的一个热点。本文梳理了纤维素基气凝胶材料的发展脉络,综述了纤维素基气凝胶材料的研究进展。重点对纤维素基气凝胶的制备方法进行了总结,包括基于含水溶剂和无水溶剂的纤维素直接溶解法及源自植物纤维素和细菌纤维素的纤维素纳米纤维的水相分散法。介绍了纤维素基气凝胶力学性能的提高和功能性开发的最新研究结果。最后对纤维素基气凝胶材料的发展前景和研究方向进行了展望。     

自由基修饰共轭微孔聚合物应用于5-羟甲基糠醛选择性氧化

采用有机单体侧链嫁接2,2,6,6-四甲基哌啶氧自由基（2,2,6,6-tetramethylpiperidineoxyl,TEMPO）的策略将TEMPO嫁接到2,5-二溴苯甲酸侧链,并与四（4-乙炔基苯）甲烷通过Sonogashira偶联反应,构筑TEMPO自由基功能化共轭微孔聚合物CMP-4-TEMPO.利用核磁共振谱（NMR）、扫描电子显微镜（SEM）、粉末X-射线衍射（XRD）红外吸收光谱（FT-IR）和电子顺磁共振谱（EPR）等技术研究了所合成单体及CMP形貌和结构.催化性能测试结果表明CMP-4-TEMPO可将5-羟甲基糠醛（5-HMF）高效、高选择性氧化成高附加值2,5-二甲酰基呋喃（2,5-DFF）.CMP-4-TEMPO催化剂循环利用10次仍保持较高的转化率.提出了CMP-4-TEMPO中形成TEMPO氧正离子是实现5-HMF转化为2,5-DEF的催化氧化机理.CMP-4-TEMPO有望成为各种醇高效、高选择性氧化以及可循环利用的异相催化剂.     

Transparent and flame retardant cellulose/aluminum hydroxide nanocomposite aerogels

Cellulose-based nanocomposite aerogels were prepared by incorporation of aluminum hydroxide (AH) nanoparticles into cellulose gels via in-situ sol-gel synthesis and following supercritical CO₂ drying. The structure and properties of cellulose/AH nanocomposite aerogels were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, ultraviolet-visible spectrometry, N₂ adsorption, thermogravimetric analysis, and micro-scale combustion calorimetry. The results indicated that the AH nanoparticles were homogeneously distributed within matrix, and the presence of AH nanoparticles did not affect the homogeneous nanoporous structure and morphology of regenerated cellulose aerogels prepared from 1-allyl-3-methylimidazolium chloride solution. The resultant nanocomposite aerogels exhibited good transparency and excellent mechanical properties. Moreover, the incorporation of AH was found to significantly decrease the flammability of cellulose aerogels. Therefore, this work provides a facile method to prepare transparent and flame retardant cellulose-based nanocomposite aerogels, which may have great potential in the application of building materials.     

Mn(Ⅱ)/Mn(Ⅲ)电对在硫酸溶液中氧化还原行为

采用循环伏安法对Mn(Ⅱ)/Mn(Ⅲ)电对在硫酸溶液中铂电极上的氧化还原与Mn(Ⅱ)浓度、酸浓度、扫描速率、温度以及对流因素的函数关系进行了研究.结果发现,Mn(Ⅱ)在铂电极上Mn(Ⅱ)的氧化及Mn(Ⅲ)的还原均受扩散控制；升高温度和磁搅拌均能增加Mn(Ⅱ)氧化为Mn(Ⅲ)的速率；增加酸浓度和Mn(Ⅱ)浓度有利于增加Mn(Ⅲ)的稳定性,减少Mn(Ⅲ)的歧化和水解.