Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Synthesis and luminescence characteristics of conjugated dendrimers with 2,4,6‐triaryl‐1,3,5‐triazine periphery

We have synthesized conjugated dendrimer with triazine peripheries, and their luminescence properties were investigated. The dendrimers consist of dendritic triazine wedges for electron transport, distyrylbenzene core as an emitting moiety, and t‐butyl peripheral groups for good processing properties. The dendrimers have LUMO values of about ?2.7 eV possibly because of the triazine moiety with high electron affinity. Photoluminescence study indicates that energy transfer occurs from the triazine wedges to the stilbene bridge, and finally to the core chromophore units due to a cascade decrease of bandgap from the peripheral wedge to core moiety. Therefore, the emission wavelength was determined by the structure of the core unit. The energy transfer efficiency of distyrylbenzene‐cored dendrimers was about 75 and 55% for Trz‐1GD‐DSB and Trz‐2GD‐DSB, respectively. A preliminary electroluminescence property also was investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 254–263, 2006     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

Structure and electrical transport properties of bismuth thin films prepared by RF magnetron sputtering

Bismuth thin films were prepared on glass substrates with RF magnetron sputtering and the effects of deposition temperature on surface morphology and their electrical transport properties were investigated. Grain growth of bismuth and the coalescence of grains were observed above 393 K with field emission secondary electron microscopy. Continuous thin films could not be obtained above 448 K because of the segregation of grains. Hall effect measurements showed that substrate heating yields the decrease of carrier density and the increase of mobility in exponential ways until 403 K. Resistivity of sputter deposited bismuth films has its minimum (about 0.7 × 10⁻³ Ω cm) in range of 403-433 K. Annealing of bismuth films deposited at room temperature was carried out in a radiation furnace with flowing hydrogen gas. The change of resistivity was not significant due to the cancellation of the decrease of carrier density and the increase of mobility. However, the abrupt change of electrical properties of film annealed above 523 K was observed, which is caused by the oxidation of bismuth layer.     

Differential Pulse Polarographic Determination of Nitrate in AUT Solution

A differential pulse polarographic method for the determination of nitrate ion has been developed. With 0.5 M CaCl₂ as supporting electrolyte, NO^?₃ is reduced to give a peak with E_1/2=–1.836 Volt vs. the Ag/AgCl electrode. The differential pulse polarographic peak height is proportional to the nitrate concentration from 20 to 60 ppm. The detection limit for nitrate is 2 ppm in pure aqueous solution. In the determination of 40 ppm nitrate a relative precision (relative standard deviation) of less than 2% was achieved. Nitrite interferes seriously and should be absent if accurate results are required. The method has been applied to the determination of nitrate in Ammonium Uranyl Tricarbonate (AUT) Solution, results obtained by this method are compared to those obtained by ion chromatography. The agreement between the two sets of results suggests that the DPP method can be used with a fair degree of confidence.     

Ultrafast non-linear optical properties of Ge20As25Se55 chalcogenide films

The non-resonant third-order non-linear optical properties of amorphous Ge₂₀As₂₅Se₅₅ films were studied experimentally by the method of the femtosecond optical heterodyne detection of optical Kerr effect. The real and imaginary parts of complex third-order optical non-linearity could be effectively separated and their values and signs could be also determined, which were 6.6 × 10⁻¹² and −2.4 × 10⁻¹² esu, respectively. Amorphous Ge₂₀As₂₅Se₅₅ films showed a very fast response in the range of 200 fs under ultrafast excitation. The ultrafast response and large third-order non-linearity are attributed to the ultrafast distortion of the electron orbitals surrounding the average positions of the nucleus of Ge, As and Se atoms. The high third-order susceptibility and a fast response time of amorphous Ge₂₀As₂₅Se₅₅ films makes it a promising material for application in advanced techniques especially in optical switching.