Spectroscopic study of a magnetically rotating arc between opper electrodes in contaminated argon

The effects of N₂ and CO contaminants in atmospheric-pressure argon on an arc rotating between two concentric copper electrodes has been studied using optical spectroscopy of copper lines. The axial temperature of the magnetically driven arc in Ar + %N₂ was determined to be around 10,000 K for arc currents of SO to 200 A. The diffusion process of the copper vapor from the cathode was also studied. A copper density maximum 1 mm from the cathode along the arc column was found in Ar + %N₂. Removal of the contaminated cathode surface layers by the arc when contaminant injection in the plasma gas was stopped was found to be a slow process with a time scale depending on the type of the gas contaminant. The presence of gas contaminant in the electrode material controls the cathode erosion mechanism and the overall arc behavior in the transition between a contaminated to a pure argon arc.     

Epoxy‐functionalized,low‐glass‐transition‐temperature latex. II. Interdiffusion versus crosslinking in the presence of a diamine

This article describes the results of experiments examining the competition between the polymer diffusion rate and the crosslinking rate in low‐glass‐transition‐temperature, epoxy‐containing latex films in the presence of a diamine. We examined films formed from donor‐ and acceptor‐labeled poly(butyl acrylate‐co‐methyl methacrylate‐co‐glycidyl methacrylate) copolymer latex and studied the influence of several parameters on the growth rate of gel content and the rate of polymer diffusion. These factors include the molecular weight of the latex polymer, the presence or absence of a diamine crosslinking agent, and the cure protocol. The results were compared to the predictions of a recent theory of the competition between crosslinking and polymer diffusion across interfaces. In the initially formed films, polymer diffusion occurs more rapidly than the chemical reaction rate. Therefore, these films fall into the fast‐diffusion category of this model. In our system (unlike in the model), the latex polymer has a broad distribution of molecular weights and a distribution of diffusivities. The shortest chains contribute to the early time diffusion that we measure. At later stages of our experiment, slower diffusing species contribute to the signal that we measure. The diffusion time decreases substantially, and we observe a crossover to a regime in which the chemical reaction dominates. The increases in chain branching and gel formation bring polymer diffusion to a halt. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4098–4116, 2002     

Large area excimer laser induced deposition of titanium from titanium tetrachloride

Large area excimer laser induced deposition of titanium on fused silica from TiCl₄ is studied with an emphasis on process modeling. We show that several TiCl₄ monolayers can be adsorbed if the surface is adequately prepared and that the Ti thin film growth occurs through the photodecomposition of this adsorbed TiCl₄ layer. We propose two growth regimes. During an initiation phase, up to 3 nm in thickness, the adsorbed layer is photochemically decomposed giving a growth rate of 0.015 nm/pulse. In a second phase, the deposition rate increases to between 2 and 7 nm/pulse due to the laser heating of the preceding photochemically deposited titanium film. Between consecutive pulses, TiCl₄ molecules primarily from the adsorbed layer diffuse to the reaction zone leading to a new adsorbed layer ready to be transformed to solid titanium.     

Number-average molecular mass determination of polymeric material by pyrolysis-gas chromatography

The number-average molecular mass of a polymeric material has been determined by pyrolysis-gas chromatography (Py-GC) via end-group analysis. The major advantage of this technique is that no sample preparation is required. The sample is not required to be in the dilute solution form, and the amount of sample needed is approximately 0.5 mg. Phenyl group-terminated polybutadiene systems have been studied as an example. The application of Py-GC to obtain the end-group concentration, the number-average molecular mass and the limitations of this method are discussed in detail. The success of this development elevates the role of Py-GC as an important technique for end-group analysis for the determination of number-average molecular mass.     

EVALUATION OF NEW BENZOPORPHYRIN DERIVATIVES WITH ENHANCED PDT EFFICACY*

Abstract— A first report on the biological evaluation of a series of isomerically pure benzoporphyrin derivatives ( cis- and frarcs-isomers) as methyl esters is described. In preliminary in vivo studies, the n- bexyl ether analogues of both cis- and trans -isomers of benzoporphyrin derivatives were found to be more active than the industrially prepared benzoporphyrin derivative, a mixture of monocarboxylic acids (BPDMA, Quadralogic Technologies, Vancouver). Further studies with 4-de-vinyl-4-(I-hexyloxyethyl) benzoporphyrin derivative showed that, like BPDMA, it had reduced residual skin phototoxicity compared in mice with Photofrin®. The uptake and clearance characteristics of BPDMA were also compared with the 4-(1-hexyloxyethyl)-derivative by in vivo reflection spectroscopy.     

Schistosomiasis Chemotherapy

After malaria, schistosomiasis (or bilharzia) is the second most prevalent disease in Africa, and is occurring in over 70 countries in tropical and subtropical regions. It is estimated that 600 million people are at risk of infection, 200 million people are infected, and at least 200 000 deaths per year are associated with the disease. All schistosome species are transmitted through contact with fresh water that is infested with free‐swimming forms of the parasite, which is known as cercariae and produced by snails. When located in the blood vessels of the host, larval and adult schistosomes digest red cells to acquire amino acids for growth and development. Vaccine candidates have been unsuccessful up to now. Against such devastating parasitic disease, the antischistosomal arsenal is currently limited to a single drug, praziquantel, which has been used for more than 35 years. Because the question of the reduction of the activity of praziquantel was raised recently, it is thus urgent to create new and safe antischistosomal drugs that should be combined with praziquantel to develop efficient bitherapies.     

Nonreciprocal devices in integrated optics

This article reviews the solutions that have been studied for the implementation of nonreciprocal devices in integrated optics. These components, either isolators or circulators, use the nonreciprocal interaction between light and a magnetic medium. The only two isolators that have been experimented on to date are described in detail with their advantages and drawbacks, and some solutions are proposed to overcome the difficulties encountered.     

Nonvolatile memory elements based on the intercalation of organic molecules inside carbon nanotubes

We propose a novel class of nonvolatile memory elements based on the modification of the transport properties of a conducting carbon nanotube by the presence of an encapsulated molecule. The guest molecule has two stable orientational positions relative to the nanotube that correspond to conducting and nonconducting states. The mechanism, governed by a local gating effect of the molecule on the electronic properties of the nanotube host, is studied using density functional theory. The mechanisms of reversible reading and writing of information are illustrated with a F4TCNQ molecule encapsulated inside a metallic carbon nanotube. Our results suggest that this new type of nonvolatile memory element is robust, fatigue-free, and can operate at room temperature.