Simultaneous Droplet Size and Gas-Phase Turbulence Measurements in a Spray Flow using Phase-Doppler Interferometry

A recently developed method to increase the sensitivity of a phase-Doppler interferometer (PDI) has been applied to an annular air flow interacting with a spray under isothermal conditions in order to demonstrate the applicability of the method to obtaining velocity and turbulence characteristics of the gas-phase in a two-phase flow. A conventional PDI system operated in the first order refraction mode cannot be configured to efficiently detect small seed particles in the presence of large droplets due to the limited dynamic range of the photodetectors. It is therefore difficult or impossible to obtain seed particle detection rates sufficient for turbulence measurements. Doping the spray with a very small quantity of dye preferentially attenuates the light intensity scattered by large droplets, thus allowing the PDI system to detect small seed particles without damaging the photodetectors when large particles are present in the flow. Application of this method to a two-phase flow produced by a pressure-swirl atomizer coaxially located within an annular air jet has resulted in profiles of axial mean and fluctuating velocities and shear stresses as well as integral time scales and turbulent energy spectra.     

Viscous Interaction Between a Vortex Tube and a Rotating Spherical Particle

The transient advection of a cylindrical vortex tube in a viscous incompressible flow field and its interaction with a rotating/spinning spherical particle has been investigated numerically at Reynolds numbers in the range of 20≤ Re≤200 for angular velocities of 0≤Ω≤0.5. The effects of vortex parameters such as size, circulation strength and initial position relative to the particle, on the temporal behavior of the lift and drag forces are studied. Vortex‐sphere interactions bring about major changes in the flow field particularly when coupled with particle rotation. It is observed that the forces acting on the particle are significantly influenced during the time that the vortex core is in the vicinity of the particle. The extent of these local changes are about ±30% in the drag coefficient and about ±200% in the lift coefficient as compared to flow over a rotating solid sphere with no vortex interaction. It is also found that a vortex with core radius between one and two particle diameters creates the strongest temporal variations in the lift and drag coefficients. Furthermore, maximum lift variations occur for the vortex‐particle head on collision, while a vortex with an offset distance of about one diameter from the principal flow axis generates the maximum drag variations.     

A Novel Synthesis of DL-proto-, and DL-vibo-Quercitol via 1, 4-Cyclohexadiene

Photooxygenation of 1, 4-cyclohexadiene 3 followed by reduction with LiAlH₄ or thiourea gave (25/1)-cyclohex-3-ene-triol 7a. trans-Hydroxylation of triol 7a with three different methods afforded both of proto-quercitol la and vibo-quercitol 2a.     

Electrochromic Properties of ‘Trimeric' Thiophene‐pyrrole‐thiophene Derivative Grown from Electrodeposited 6‐(2,5‐di(thiophen‐2‐yl)‐1H‐pyrrol‐1‐yl)hexan‐1‐amine and its Copolymer

A centrosymmetric polymer precursor, namely 6‐(2,5‐di(thiophen‐2‐yl)‐1H‐pyrrol‐1‐yl)hexan‐1‐amine (TPHA), was synthesized via a Knorr–Paal reaction using 1,4‐di(2‐thienyl)‐1,4‐butanedione and hexane‐1,6‐diamine. The resultant monomer was characterized by Nuclear Magnetic Resonance (¹H‐NMR). Electroactivity of TPHA was investigated via cyclic voltammetry. The electronic structure and the nature of electrochromism in P(TPHA) and its copolymer with EDOT, (P(TPHA‐co‐EDOT)), were examined via spectroelectrochemistry studies. P(TPHA) switches between claret red neutral state and blue oxidized state. Optical response times for coloring and bleaching processes of the P(TPHA) and P(TPHA‐co‐EDOT) were found as 2.1 s and 1.6 s, respectively.

The copolymer of TPHA was used to construct dual type polymer electrochromic devices (ECDs) against poly(3,4‐ethylenedioxythiophene) (PEDOT). Spectroelectrochemistry and electrochromic switching out of the devices were investigated.     

Effect of Pore-Forming Agent Type on Swelling Properties of Macroporous Poly(N-[3-(dimethylaminopropyl)]-methacrylamide-co-acrylamide) Hydrogels

Macroporous poly(N-[3-(dimethylaminopropyl)]methacrylamide-co-acrylamide) [P(DMAPMA-co-AAm)] hydrogels were prepared by free-radical crosslinking copolymerization of corresponding monomers in water using two different pore-forming agents such as hydroxypropyl celluose (HPC) and poly(ethylene glycol) (PEG). The effect of these pore-forming agents on the volume phase transition temperature (VPT-T), interior morphology and swelling/deswelling kinetics of the P(DMAPMA-co-AAm) hydrogels was investigated. Scanning electron micrographs revealed that the interior network structure of the hydrogel matrix became more porous due to the presence of HPC or PEG pore-forming agents. The more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to the external stimuli. Particularly, due to its unique macroporous structure, the PEG-modified hydrogel showed a tremendously faster response to the external temperature changes during deswelling process and the swelling process at 22°C.     

A novel and rapid extraction protocol for sensitive and accurate determination of prochloraz in orange juice samples: Vortex‐assisted spraying‐based fine droplet formation liquid‐phase microextraction before gas chromatography–mass spectrometry

A novel, ecofriendly, and easy extraction and preconcentration method named as vortex‐assisted spraying‐based fine droplet formation liquid‐phase microextraction was proposed for the determination of prochloraz at trace levels in orange juice samples by gas chromatography–mass spectrometry (GC‐MS). In this novel system, extraction solvent is dispersed by the help of spraying apparatus instead of dispersive solvent. Various parameters of the method were carefully optimized to increase signal‐to‐noise ratio of the analyte. Under the optimum chromatographic and extraction conditions, limit of detection and limit of quantification were calculated as 3.2 and 10.8 μg/kg, respectively. Moreover, enhancement in quantification power for the GC‐MS system was determined as 372 folds based on LOQ comparison. Relative recovery results for orange juice samples were found to be between 95.0–107.7% by utilizing matrix matching calibration. Furthermore, the developed method may be used to efficiently and simply extract other organic compounds for their determinations in several matrices.     

Oxidation of some alkoxy-cycloheptatriene derivatives: unusual formation of furan and furanoids from cycloheptatrienes

The oxidation of some alkoxy tropone and tropone ketal derivatives with singlet oxygen and m-chloroperbenzoic acid was investigated. In most cases furan and furanoid derivatives were isolated. The structures of the formed products were determined by means of spectral data and the formation mechanism of these unusual products is discussed.     

Relationships between unfolded configurations of proteins and dynamics of folding to the native state

We compare folding trajectories of chymotrypsin inhibitor (CI2) using a dynamic Monte Carlo scheme with Go-type potentials. The model considers the four backbone atoms of each residue and a sphere centered around C^β the diameter of which is chosen according to the type of the side group. Bond lengths and bond angles are kept fixed. Folding trajectories are obtained by giving random increments to the φ and ψ torsion angles with some bias toward the native state. Excluded volume effects are considered. Two sets of 20 trajectories are obtained, with different initial configurations. The first set is generated from random initial configurations. The initial configurations of the second set are generated according to knowledge-based neighbor dependent torsion probabilities derived from triplets in the Protein Data Bank. Compared to chains with randomly generated initial configurations, those generated with neighbor-dependent probabilities (i) fold faster, (ii) have better defined secondary structure elements, and (iii) have less number of non-native contacts during folding. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3667–3678, 2006     

On the optimal control of partially observed inventory systems

This Note introduces recent developments in the analysis of inventory systems with partial observations. The states of these systems are typically conditional distributions, which evolve in infinite dimensional spaces over time. Our analysis involves introducing unnormalized probabilities to transform nonlinear state transition equations to linear ones. With the linear equations, the existence of the optimal feedback policies are proved for two models where demand and inventory are partially observed. In a third model where the current inventory is not observed but a past inventory level is fully observed, a sufficient statistic is provided to serve as a state. The last model serves as an example where a partially observed model has a finite dimensional state. In that model, we also establish the optimality of the basestock policies, hence generalizing the corresponding classical models with full information. To cite this article: A. Bensoussan et al., C. R. Acad. Sci. Paris, Ser. I 341 (2005).     

Dissolution of iron oxide nanoparticles inside polymer nanocapsules

The structure of poly(organosiloxane) nanocapsules partially filled with iron oxide cores of different sizes was revealed by small angle X-ray scattering and X-ray diffraction. The nanocapsules are synthesized by the formation of a poly(organosiloxane) shell around iron oxide nanoparticles and the simultaneous partial dissolution of these cores. Due to the high scattering contrast of the iron oxide cores compared to the polymer shell, the particle size distribution of the cores inside the capsules can be measured by small angle X-ray scattering. Additional information can be revealed by X-ray diffraction, which gives insights into the formation of the polymer network and the structure of the iron oxide cores. The study shows how the crystallinity and size of the nanoparticles as well as the shape and width of the size distribution can be altered by the synthesis parameters.