High-power all-normal-dispersion femtosecond pulse generation from a Yb-doped large-mode-area microstructure fiber laser

We report on an all-normal-dispersion mode-locked fiber laser based on a large-mode-area Yb-doped microstructure fiber and using a high nonlinear modulation depth semiconductor saturable absorber mirror. The laser delivers 3.3 W of average output power with positively chirped 5.5 ps pulses at a center wavelength of 1033 nm. The pulse repetition rate is 46.4 MHz, which results in an energy per pulse of 71 nJ. These pulses are extracavity dechirped down to 516 fs by using bulk gratings. The average power of the dechirped pulses is 2.3 W, which corresponds to a peak power of more than 96 kW.     

Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

Statics and dynamics of adhesion between two soap bubbles

An original set-up is used to study the adhesive properties of two hemispherical soap bubbles put into contact. The contact angle at the line connecting the three films is extracted by image analysis of the bubbles profiles. After the initial contact, the angle rapidly reaches a static value slightly larger than the standard 120^° angle expected from Plateau rule. This deviation is consistent with previous experimental and theoretical studies: it can be quantitatively predicted by taking into account the finite size of the Plateau border (the liquid volume trapped at the vertex) in the free energy minimization. The visco-elastic adhesion properties of the bubbles are further explored by measuring the deviation Δθ_d(t) of the contact angle from the static value as the distance between the two bubbles supports is sinusoidally modulated. It is found to linearly increase with Δr _c/r _c , where r_c is the radius of the central film and Δr _c the amplitude of modulation of this length induced by the displacement of the supports. The in-phase and out-of-phase components of Δθ_d(t) with the imposed modulation frequency are systematically probed, which reveals a transition from a viscous to an elastic response of the system with a crossover pulsation of the order 1rad · s^-1. Independent interfacial rheological measurements, obtained from an oscillating bubble experiment, allow us to develop a model of dynamic adhesion which is confronted to our experimental results. The relevance of such adhesive dynamic properties to the rheology of foams is briefly discussed using a perturbative approach to the Princen 2D model of foams.     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

Tests of Lorentz invariance using a microwave resonator

The frequencies of a cryogenic sapphire oscillator and a hydrogen maser are compared to set new constraints on a possible violation of Lorentz invariance. We determine the variation of the oscillator frequency as a function of its orientation (Michelson-Morley test) and of its velocity (Kennedy-Thorndike test) with respect to a preferred frame candidate. We constrain the corresponding parameters of the Mansouri and Sexl test theory to delta-beta + 1/2 = (1.5+/-4.2) x 10(-9) and beta-alpha - 1= (-3.1+/-6.9) x 10(-7) which is of the same order as the best previous result for the former and represents a 30-fold improvement for the latter.     

Reactivity of Tannic Acid with Common Corrosion Products and Its Influence on the Hydrolysis of Iron in Alkaline Solutions

Hyperfine Interactions - To ascertain the role of tannic acid in the anticorrosive protection of steels, the reaction between 5% tannic acid aqueous solutions with lepidocrocite, goethite,...     

Propagation of light-pulses at a negative group-velocity

This paper deals with the apparent superluminal propagation of electromagnetic pulses in a linear dispersive medium. One specifically examines the possibility that the pulse leaving the medium may be nearly identical to the incident one (low distortion) and in significant advance of it (strongly negative group-delays). Favourable conditions are obtained in a dilute medium where the required anomalous dispersion originates in an ensemble of narrow absorption or gain lines. Analytical expressions of the advancement of the pulse centre-of-gravity and of the lowest order distortion are established from the transfer-function of the medium. The experiments already achieved with arrangements involving a single absorption-line or a gain-doublet are analysed in detail and compared. The considerable difficulties to overcome in order to attain advancements comparable to the pulse width without important distortion are pointed out. New and promising schemes involving a narrow dip in a gain profile or absorption-doublets are proposed. Received 4 July 2002 / Received in final form 8 November 2002 Published online 4 February 2003 RID="a" ID="a"e-mail: bruno.macke@univ-lille1.fr RID="b" ID="b"Unité Mixte de Recherche de l'Université et du CNRS (UMR 8523)     

Cooling efficiency in collisions between Pd and He,Ne, Ar and Kr

The cooling of the metal cluster Pd₁₃ in an atmosphere of rare gas has been studied by means of computer simulation. By simulation, the average energy transfer in collisions between one cluster and one gas atom has been obtained. Emphasis has been placed on conditions when the temperatures of the colliding species are almost equal. All modes of motion, inclusive the translation, must be considered in order to obtain vanishing energy transfer at equilibrium. A simulation scheme is presented by which the energy transfer is zero to the cluster when the gas and the cluster temperatures are equal. At equilibrium the energy transfer does however not vanish for all impact parameters. In the collisions with Pd₁₃, the cluster is heated by collisions with a small impact parameter but equally cooled by collisions with a large impact parameter. Argon and krypton are found to cool Pd₁₃ equally efficiently while neon and helium are less efficient cooling agents. Received 28 September 2001 / Received in final form 8 August 2002 Published online 12 November 2002 RID="a" ID="a"e-mail: JanW@phc.gu.se     

基于XRD的镀锌钝化膜残余应力试验研究

利用XRD技术测试了镀锌钝化膜结合界面的残余应力，同时通过电解抛光法检测了其厚度方向残余应力的分布规律，分析了残余应力对镀锌钝化膜结合强度的影响. 试验结果表明，镀锌钝化膜的残余应力均表现为压应力，并随着基体表面残余应力的增大而减小；钝化膜在2—10μm厚度方向的残应力为-274.5—-428.3MPa，其应力为梯度分布；镀锌钝化膜与基体的界面结合强度与其残余应力成反比，减小薄膜残余应力，有利于提高镀锌钝化膜与基体的结合强度. 关键词： X射线衍射法(XRD) 镀锌钝化膜 结合强度 残余应力