Compact,wide aperture X-ray preionized XeCl laser with high specific optical power

An X-ray preionized, discharge-pumped XeCl laser with a variable beam cross-section of up to 6×6 cm² is described. It uses flat electrodes and the beam width is determined by X-ray collimation. Its operation characteristics concerning reduced electric field strength (E/p) and X-ray dose are discussed in detail. The inductance of the discharge loop is minimized using a water capacitor arrangement. A very high specific optical power (90 MW/l) is achieved in an active volume of 1.2 l. The pulse energy exceeds 5 J in a 45 ns pulse (FWHM). Komatsu Ltd., Manda 1200, Hiratsuka-shi, Kanagawa 254, Japan Institute of Optics and Fine Mechanics, Department of Plasma Physics, Academia Sinica, Shanghai, P.R. China     

Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Nanoscale organization of the pathogen receptor DC-SIGN mapped by single-molecule high-resolution fluorescence microscopy.

DC-SIGN, a C-type lectin exclusively expressed on dendritic cells (DCs), plays an important role in pathogen recognition by binding with high affinity to a large variety of microorganisms. Recent experimental evidence points to a direct relation between the function of DC-SIGN as a viral receptor and its spatial arrangement on the plasma membrane. We have investigated the nanoscale organization of fluorescently labeled DC-SIGN on intact isolated DCs by means of near-field scanning optical microscopy (NSOM) combined with single-molecule detection. Fluorescence spots of different intensity and size have been directly visualized by optical means with a spatial resolution of less than 100 nm. Intensity- and size-distribution histograms of the DC-SIGN fluorescent spots confirm that approximately 80 % of the receptors are organized in nanosized domains randomly distributed on the cell membrane. Intensity-size correlation analysis revealed remarkable heterogeneity in the molecular packing density of the domains. Furthermore, we have mapped the intermolecular organization within a dense cluster by means of sequential NSOM imaging combined with discrete single-molecule photobleaching. In this way we have determined the spatial coordinates of 13 different individual dyes, with a localization accuracy of 6 nm. Our experimental observations are all consistent with an arrangement of DC-SIGN designed to maximize its chances of binding to a wide range of microorganisms. Our data also illustrate the potential of NSOM as an ultrasensitive, high-resolution technique to probe nanometer-scale organization of molecules on the cell membrane.     

Binding of single nucleotides to H+-ATP synthases observed by fluorescence resonance energy transfer

F(0)F(1)-ATP synthases couple proton translocation with the synthesis of ATP from ADP and phosphate. The enzyme has three catalytic nucleotide binding sites, one on each beta-subunit; three non-catalytic binding sites are located mainly on each alpha-subunit. In order to observe substrate binding to the enzyme, the H(+)-ATP synthase from Escherichia coli was labelled selectively with the fluorescence donor tetramethylrhodamine (TMR) at position T106C of the gamma-subunit. The labelled enzymes were incorporated into liposomes and catalysed proton-driven ATP synthesis. The substrate ATP-Alexa Fluor 647 was used as the fluorescence acceptor to perform intermolecular fluorescence resonance energy transfer (FRET). Single molecules are detected with a confocal set-up. When one ATP-Alexa Fluor 647 binds to the enzyme, FRET can be observed. Five stable states with different intermolecular FRET efficiencies were distinguished for enzyme-bound ATP-Alexa Fluor 647 indicating binding to different binding sites. Consecutive hydrolysis of excess ATP resulted in stepwise changes of the FRET efficiency. Thereby, gamma-subunit movement during catalysis was directly monitored with respect to the binding site with bound ATP-Alexa Fluor 647.     

Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Development of reactive thiol-modified monolithic capillaries and in-column surface functionalization by radical addition of a chromatographic ligand for capillary electrochromatography

Reactive thiol-modified capillary columns for capillary electrochromatography (CEC) were developed by transforming the pendent 2,3-epoxypropyl groups of poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) monoliths into 3-mercapto-2-hydroxy-propyl residues by a nucleophilic substitution reaction, employing sodium-hydrogen sulfide as nucleophilic reagent. Conditions for this modification reaction were systematically optimized with respect to different parameters, such as reaction temperature, pH-value, reaction time, type and concentration of organic modifier, and concentration of the sodium-hydrogen sulfide solution. The amount of thiol groups that was generated on the monolith surface was determined directly in the capillaries by a disulfide-exchange reaction employing 2,2'-dipyridyl disulfide (DPDS). This reaction in the capillary liberates pyridine-2-thione in equimolar amount to the surface sulfhydryls, which was collected into a vial and determined photometrically at 343 nm by RP-HPLC. About 17% of the total lateral epoxide moieties of the monolithic substrate could be transformed to reactive sulfhydryl groups, which corresponds to about 0.7 mmol g(-1) monolithic polymer, with a column-to-column repeatability of 3.2% R.S.D. The reactive thiol groups can be utilized to attach any chromatographic ligand with appropriate anchor in a second step, e.g. by radical addition, graft polymerization, nucleophilic substitution, disulfide formation or Michael addition reaction. To demonstrate the feasibility of the concept, we chose an anion exchange type chromatographic ligand based on a quinine derivative, O-9-tert-butylcarbamoylquinine (t-BuCQN) which was attached to the monolith in a radical addition reaction, for a further in-column surface functionalisation. About 78% of the sulfhydryl groups were derivatized with t-BuCQN as determined from differential DPDS assays before and after the selector immobilization reaction. The applicability of these surface-functionalised monolithic capillary columns could be shown by an electrochromatographic separation of the enantiomers of N-3,5-dinitrobenzoyl-leucine, which performed fairly well compared to an analogous capillary that was fabricated by an in situ copolymerization approach.     

The contribution of the pressure drop to analyte retention in coupled column supercritical fluid chromatography of lipids

Summary This paper reports the qualitative and quantitative effects of the column pressure drop on the retention of lipid components in a serially coupled capillary column SFC system. The contribution of the pressure drop consists of two components, the density effect and the flow effect. The magnitude of the flow effect,i. e. the change in retention which results from changes in the flow-rate when column pressures are changed, is determined by the difference in single column analyte k values. The effect will be positive compared with the uncorrected retention values when the column with largest k value is closest to the injector. With the columns in reversed order, the effect will be negative. The contribution from the density effect always resulted in larger coupled column k values and was in most instances of more significance than the flow effect component. Values calculated with and without pressure drop correction have been compared and it has been shown that for most of the eighteen model lipid compounds investigated, the deviations from the experimental retention factors were smaller when pressure drop corrections were made.     

α-Glucosidase synthesis in batch and continuous culture ofSaccharomyces cerevisiae

Glucose prevents maltose utilization bySaccharomyces cerevisiae in batch culture, whereas in a mixed carbohydrate-limited chemostat, maltose and glucose were consumed simultaneously. The specific activity of α-glucosidase was dependent on the dilution rate as well as the proportion of maltose in the mixture. Maximum specific activities in the batch and chemostat cultures on mixtures of maltose and glucose were lower than corresponding values observed on maltose alone.